Linus Walleij 2458716a5b integrator: rewrite the AP PCI driver ... The PCI support for the Integrator AP has apparently never been finished and I strongly suspect that it has never worked, so let's fix it. This is a list of the more or less un-splittable changes done in this driver rewrite: - Replace the register definitions stashed into the config file (!) with a copy if the register file from the Linux kernels arch/arm/include/asm/hardware/pci_v3.h - Delete the unreadable gigantic macros that perform the config accesses and replace them with copyedited code from Linux arch/arm/mach-integrator/pci_v3.c - Rewrite the rest of the setup code to use the v3_[read|write][lwb]() accessors. - Enable PCI by default in the AP board configuration. - Fix checkpatch warnings and make code more conformant. Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>		2012-02-27 21:19:24 +01:00
..
arm-ebi.h	integrator: make flash writeable on boot	2011-11-10 15:27:15 +01:00
integrator-sc.h	integrator: add system controller header	2011-11-10 15:27:18 +01:00
integrator.c	integrator: stop calling pci_init() twice	2012-02-27 21:19:24 +01:00
lowlevel_init.S	integratorap: make the compile work again	2011-09-03 22:40:45 +02:00
Makefile	punt unused clean/distclean targets	2011-10-15 22:20:36 +02:00
pci.c	integrator: rewrite the AP PCI driver	2012-02-27 21:19:24 +01:00
pci_v3.h	integrator: rewrite the AP PCI driver	2012-02-27 21:19:24 +01:00
timer.c	Timer: Remove reset_timer_masked()	2011-07-26 14:54:15 +02:00