mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 02:20:25 +00:00
accef43145
The AT91SAM9G20 BOOT ROM apparently initializes PA23 and PA24 to multi drive (open drain). Revert this, if those pins are going to be used for MII. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
236 lines
6.8 KiB
C
236 lines
6.8 KiB
C
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/io.h>
|
|
|
|
/*
|
|
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
|
|
* peripheral pins. Good to have if hardware is soldered optionally
|
|
* or in case of SPI no slave is selected. Avoid lines to float
|
|
* needlessly. Use a short local PUP define.
|
|
*
|
|
* Due to errata "TXD floats when CTS is inactive" pullups are always
|
|
* on for TXD pins.
|
|
*/
|
|
#ifdef CONFIG_AT91_GPIO_PULLUP
|
|
# define PUP CONFIG_AT91_GPIO_PULLUP
|
|
#else
|
|
# define PUP 0
|
|
#endif
|
|
|
|
void at91_serial0_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */
|
|
writel(1 << AT91SAM9260_ID_US0, &pmc->pcer);
|
|
}
|
|
|
|
void at91_serial1_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */
|
|
writel(1 << AT91SAM9260_ID_US1, &pmc->pcer);
|
|
}
|
|
|
|
void at91_serial2_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */
|
|
writel(1 << AT91SAM9260_ID_US2, &pmc->pcer);
|
|
}
|
|
|
|
void at91_serial3_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
|
|
writel(1 << AT91_ID_SYS, &pmc->pcer);
|
|
}
|
|
|
|
void at91_serial_hw_init(void)
|
|
{
|
|
#ifdef CONFIG_USART0
|
|
at91_serial0_hw_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART1
|
|
at91_serial1_hw_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART2
|
|
at91_serial2_hw_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART3 /* DBGU */
|
|
at91_serial3_hw_init();
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
|
|
void at91_spi0_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
|
|
|
|
/* Enable clock */
|
|
writel(1 << AT91SAM9260_ID_SPI0, &pmc->pcer);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 11, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 16, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 17, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 11, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 16, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 17, 1);
|
|
}
|
|
}
|
|
|
|
void at91_spi1_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */
|
|
|
|
/* Enable clock */
|
|
writel(1 << AT91SAM9260_ID_SPI1, &pmc->pcer);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 5, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_b_periph(AT91_PIO_PORTC, 4, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 5, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 4, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
void at91_macb_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* ERXER */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ETXEN */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ETX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ETX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* EMDIO */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* EMDC */
|
|
|
|
#ifndef CONFIG_RMII
|
|
at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ECRS */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECOL */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */
|
|
#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260)
|
|
/*
|
|
* use PA10, PA11 for ETX2, ETX3.
|
|
* PA23 and PA24 are for TWI EEPROM
|
|
*/
|
|
at91_set_b_periph(AT91_PIO_PORTA, 10, 0); /* ETX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 11, 0); /* ETX3 */
|
|
#else
|
|
at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */
|
|
#if defined(CONFIG_AT91SAM9G20)
|
|
/* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
|
|
at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
|
|
at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
|
|
#endif
|
|
#endif
|
|
at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_ATMEL_MCI) || defined(CONFIG_GENERIC_ATMEL_MCI)
|
|
void at91_mci_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */
|
|
#if defined(CONFIG_ATMEL_MCI_PORTB)
|
|
at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */
|
|
#else
|
|
at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */
|
|
#endif
|
|
}
|
|
#endif
|