u-boot/drivers/ddr/marvell/axp/ddr3_dfs.c
Stefan Roese ff9112df8b arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory
With the upcoming addition of the Armada 38x DDR support, which is not
compatible to the Armada XP DDR init code, we need to introduce a new
directory infrastructure. To support multiple Marvell DDR controller.

This will be the new structure:

     drivers/ddr/marvell/axp
     Supporting Armada XP (AXP) devices (and perhaps Armada 370)

     drivers/ddr/marvell/a38x
     Supporting Armada 38x devices (and perhaps Armada 39x)

Signed-off-by: Stefan Roese <sr@denx.de>
2015-07-23 10:38:30 +02:00

1552 lines
48 KiB
C

/*
* Copyright (C) Marvell International Ltd. and its affiliates
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <i2c.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include "ddr3_hw_training.h"
/*
* Debug
*/
#define DEBUG_DFS_C(s, d, l) \
DEBUG_DFS_S(s); DEBUG_DFS_D(d, l); DEBUG_DFS_S("\n")
#define DEBUG_DFS_FULL_C(s, d, l) \
DEBUG_DFS_FULL_S(s); DEBUG_DFS_FULL_D(d, l); DEBUG_DFS_FULL_S("\n")
#ifdef MV_DEBUG_DFS
#define DEBUG_DFS_S(s) puts(s)
#define DEBUG_DFS_D(d, l) printf("%x", d)
#else
#define DEBUG_DFS_S(s)
#define DEBUG_DFS_D(d, l)
#endif
#ifdef MV_DEBUG_DFS_FULL
#define DEBUG_DFS_FULL_S(s) puts(s)
#define DEBUG_DFS_FULL_D(d, l) printf("%x", d)
#else
#define DEBUG_DFS_FULL_S(s)
#define DEBUG_DFS_FULL_D(d, l)
#endif
#if defined(MV88F672X)
extern u8 div_ratio[CLK_VCO][CLK_DDR];
extern void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps);
#else
extern u16 odt_dynamic[ODT_OPT][MAX_CS];
extern u8 div_ratio1to1[CLK_CPU][CLK_DDR];
extern u8 div_ratio2to1[CLK_CPU][CLK_DDR];
#endif
extern u16 odt_static[ODT_OPT][MAX_CS];
extern u32 cpu_fab_clk_to_hclk[FAB_OPT][CLK_CPU];
extern u32 ddr3_get_vco_freq(void);
u32 ddr3_get_freq_parameter(u32 target_freq, int ratio_2to1);
#ifdef MV_DEBUG_DFS
static inline void dfs_reg_write(u32 addr, u32 val)
{
printf("\n write reg 0x%08x = 0x%08x", addr, val);
writel(val, INTER_REGS_BASE + addr);
}
#else
static inline void dfs_reg_write(u32 addr, u32 val)
{
writel(val, INTER_REGS_BASE + addr);
}
#endif
static void wait_refresh_op_complete(void)
{
u32 reg;
/* Poll - Wait for Refresh operation completion */
do {
reg = reg_read(REG_SDRAM_OPERATION_ADDR) &
REG_SDRAM_OPERATION_CMD_RFRS_DONE;
} while (reg); /* Wait for '0' */
}
/*
* Name: ddr3_get_freq_parameter
* Desc: Finds CPU/DDR frequency ratio according to Sample@reset and table.
* Args: target_freq - target frequency
* Notes:
* Returns: freq_par - the ratio parameter
*/
u32 ddr3_get_freq_parameter(u32 target_freq, int ratio_2to1)
{
u32 ui_vco_freq, freq_par;
ui_vco_freq = ddr3_get_vco_freq();
#if defined(MV88F672X)
freq_par = div_ratio[ui_vco_freq][target_freq];
#else
/* Find the ratio between PLL frequency and ddr-clk */
if (ratio_2to1)
freq_par = div_ratio2to1[ui_vco_freq][target_freq];
else
freq_par = div_ratio1to1[ui_vco_freq][target_freq];
#endif
return freq_par;
}
/*
* Name: ddr3_dfs_high_2_low
* Desc:
* Args: freq - target frequency
* Notes:
* Returns: MV_OK - success, MV_FAIL - fail
*/
int ddr3_dfs_high_2_low(u32 freq, MV_DRAM_INFO *dram_info)
{
#if defined(MV88F78X60) || defined(MV88F672X)
/* This Flow is relevant for ArmadaXP A0 */
u32 reg, freq_par, tmp;
u32 cs = 0;
DEBUG_DFS_C("DDR3 - DFS - High To Low - Starting DFS procedure to Frequency - ",
freq, 1);
/* target frequency - 100MHz */
freq_par = ddr3_get_freq_parameter(freq, 0);
#if defined(MV88F672X)
u32 hclk;
u32 cpu_freq = ddr3_get_cpu_freq();
get_target_freq(cpu_freq, &tmp, &hclk);
#endif
/* Configure - DRAM DLL final state after DFS is complete - Enable */
reg = reg_read(REG_DFS_ADDR);
/* [0] - DfsDllNextState - Disable */
reg |= (1 << REG_DFS_DLLNEXTSTATE_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Configure - XBAR Retry response during Block to enable internal
* access - Disable
*/
reg = reg_read(REG_METAL_MASK_ADDR);
/* [0] - RetryMask - Disable */
reg &= ~(1 << REG_METAL_MASK_RETRY_OFFS);
/* 0x14B0 - Dunit MMask Register */
dfs_reg_write(REG_METAL_MASK_ADDR, reg);
/* Configure - Block new external transactions - Enable */
reg = reg_read(REG_DFS_ADDR);
reg |= (1 << REG_DFS_BLOCK_OFFS); /* [1] - DfsBlock - Enable */
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Registered DIMM support */
if (dram_info->reg_dimm) {
/*
* Configure - Disable Register DIMM CKE Power
* Down mode - CWA_RC
*/
reg = (0x9 & REG_SDRAM_OPERATION_CWA_RC_MASK) <<
REG_SDRAM_OPERATION_CWA_RC_OFFS;
/*
* Configure - Disable Register DIMM CKE Power
* Down mode - CWA_DATA
*/
reg |= ((0 & REG_SDRAM_OPERATION_CWA_DATA_MASK) <<
REG_SDRAM_OPERATION_CWA_DATA_OFFS);
/*
* Configure - Disable Register DIMM CKE Power
* Down mode - Set Delay - tMRD
*/
reg |= (0 << REG_SDRAM_OPERATION_CWA_DELAY_SEL_OFFS);
/* Configure - Issue CWA command with the above parameters */
reg |= (REG_SDRAM_OPERATION_CMD_CWA &
~(0xF << REG_SDRAM_OPERATION_CS_OFFS));
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for CWA operation completion */
do {
reg = reg_read(REG_SDRAM_OPERATION_ADDR) &
(REG_SDRAM_OPERATION_CMD_MASK);
} while (reg);
/* Configure - Disable outputs floating during Self Refresh */
reg = reg_read(REG_REGISTERED_DRAM_CTRL_ADDR);
/* [15] - SRFloatEn - Disable */
reg &= ~(1 << REG_REGISTERED_DRAM_CTRL_SR_FLOAT_OFFS);
/* 0x16D0 - DDR3 Registered DRAM Control */
dfs_reg_write(REG_REGISTERED_DRAM_CTRL_ADDR, reg);
}
/* Optional - Configure - DDR3_Rtt_nom_CS# */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
reg = reg_read(REG_DDR3_MR1_CS_ADDR +
(cs << MR_CS_ADDR_OFFS));
reg &= REG_DDR3_MR1_RTT_MASK;
dfs_reg_write(REG_DDR3_MR1_CS_ADDR +
(cs << MR_CS_ADDR_OFFS), reg);
}
}
/* Configure - Move DRAM into Self Refresh */
reg = reg_read(REG_DFS_ADDR);
reg |= (1 << REG_DFS_SR_OFFS); /* [2] - DfsSR - Enable */
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Poll - Wait for Self Refresh indication */
do {
reg = ((reg_read(REG_DFS_ADDR)) & (1 << REG_DFS_ATSR_OFFS));
} while (reg == 0x0); /* 0x1528 [3] - DfsAtSR - Wait for '1' */
/* Start of clock change procedure (PLL) */
#if defined(MV88F672X)
/* avantaLP */
/* Configure cpupll_clkdiv_reset_mask */
reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0);
reg &= CPU_PLL_CLOCK_DIVIDER_CNTRL0_MASK;
/* 0xE8264[7:0] 0xff CPU Clock Dividers Reset mask */
dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, (reg + 0xFF));
/* Configure cpu_clkdiv_reload_smooth */
reg = reg_read(CPU_PLL_CNTRL0);
reg &= CPU_PLL_CNTRL0_RELOAD_SMOOTH_MASK;
/* 0xE8260 [15:8] 0x2 CPU Clock Dividers Reload Smooth enable */
dfs_reg_write(CPU_PLL_CNTRL0,
(reg + (2 << CPU_PLL_CNTRL0_RELOAD_SMOOTH_OFFS)));
/* Configure cpupll_clkdiv_relax_en */
reg = reg_read(CPU_PLL_CNTRL0);
reg &= CPU_PLL_CNTRL0_RELAX_EN_MASK;
/* 0xE8260 [31:24] 0x2 Relax Enable */
dfs_reg_write(CPU_PLL_CNTRL0,
(reg + (2 << CPU_PLL_CNTRL0_RELAX_EN_OFFS)));
/* Configure cpupll_clkdiv_ddr_clk_ratio */
reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL1);
/*
* 0xE8268 [13:8] N Set Training clock:
* APLL Out Clock (VCO freq) / N = 100 MHz
*/
reg &= CPU_PLL_CLOCK_DIVIDER_CNTRL1_MASK;
reg |= (freq_par << 8); /* full Integer ratio from PLL-out to ddr-clk */
dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL1, reg);
/* Configure cpupll_clkdiv_reload_ratio */
reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0);
reg &= CPU_PLL_CLOCK_RELOAD_RATIO_MASK;
/* 0xE8264 [8]=0x1 CPU Clock Dividers Reload Ratio trigger set */
dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0,
(reg + (1 << CPU_PLL_CLOCK_RELOAD_RATIO_OFFS)));
udelay(1);
/* Configure cpupll_clkdiv_reload_ratio */
reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0);
reg &= CPU_PLL_CLOCK_RELOAD_RATIO_MASK;
/* 0xE8264 [8]=0x0 CPU Clock Dividers Reload Ratio trigger clear */
dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, reg);
udelay(5);
#else
/*
* Initial Setup - assure that the "load new ratio" is clear (bit 24)
* and in the same chance, block reassertions of reset [15:8] and
* force reserved bits[7:0].
*/
reg = 0x0000FDFF;
/* 0x18700 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
/*
* RelaX whenever reset is asserted to that channel
* (good for any case)
*/
reg = 0x0000FF00;
/* 0x18704 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg);
reg = reg_read(REG_CPU_DIV_CLK_CTRL_2_ADDR) &
REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK;
/* full Integer ratio from PLL-out to ddr-clk */
reg |= (freq_par << REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS);
/* 0x1870C - CPU Div CLK control 3 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_2_ADDR, reg);
/*
* Shut off clock enable to the DDRPHY clock channel (this is the "D").
* All the rest are kept as is (forced, but could be read-modify-write).
* This is done now by RMW above.
*/
/* Clock is not shut off gracefully - keep it running */
reg = 0x000FFF02;
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_4_ADDR, reg);
/* Wait before replacing the clock on the DDR Phy Channel. */
udelay(1);
/*
* This for triggering the frequency update. Bit[24] is the
* central control
* bits [23:16] == which channels to change ==2 ==>
* only DDR Phy (smooth transition)
* bits [15:8] == mask reset reassertion due to clock modification
* to these channels.
* bits [7:0] == not in use
*/
reg = 0x0102FDFF;
/* 0x18700 - CPU Div CLK control 0 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
udelay(1); /* Wait 1usec */
/*
* Poll Div CLK status 0 register - indication that the clocks
* are active - 0x18718 [8]
*/
do {
reg = (reg_read(REG_CPU_DIV_CLK_STATUS_0_ADDR)) &
(1 << REG_CPU_DIV_CLK_ALL_STABLE_OFFS);
} while (reg == 0);
/*
* Clean the CTRL0, to be ready for next resets and next requests
* of ratio modifications.
*/
reg = 0x000000FF;
/* 0x18700 - CPU Div CLK control 0 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
udelay(5);
#endif
/* End of clock change procedure (PLL) */
/* Configure - Select normal clock for the DDR PHY - Enable */
reg = reg_read(REG_DRAM_INIT_CTRL_STATUS_ADDR);
/* [16] - ddr_phy_trn_clk_sel - Enable */
reg |= (1 << REG_DRAM_INIT_CTRL_TRN_CLK_OFFS);
/* 0x18488 - DRAM Init control status register */
dfs_reg_write(REG_DRAM_INIT_CTRL_STATUS_ADDR, reg);
/* Configure - Set Correct Ratio - 1:1 */
/* [15] - Phy2UnitClkRatio = 0 - Set 1:1 Ratio between Dunit and Phy */
reg = reg_read(REG_DDR_IO_ADDR) & ~(1 << REG_DDR_IO_CLK_RATIO_OFFS);
dfs_reg_write(REG_DDR_IO_ADDR, reg); /* 0x1524 - DDR IO Register */
/* Configure - 2T Mode - Restore original configuration */
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR);
/* [3:4] 2T - 1T Mode - low freq */
reg &= ~(REG_DUNIT_CTRL_LOW_2T_MASK << REG_DUNIT_CTRL_LOW_2T_OFFS);
/* 0x1404 - DDR Controller Control Low Register */
dfs_reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg);
/* Configure - Restore CL and CWL - MRS Commands */
reg = reg_read(REG_DFS_ADDR);
reg &= ~(REG_DFS_CL_NEXT_STATE_MASK << REG_DFS_CL_NEXT_STATE_OFFS);
reg &= ~(REG_DFS_CWL_NEXT_STATE_MASK << REG_DFS_CWL_NEXT_STATE_OFFS);
/* [8] - DfsCLNextState - MRS CL=6 after DFS (due to DLL-off mode) */
reg |= (0x4 << REG_DFS_CL_NEXT_STATE_OFFS);
/* [12] - DfsCWLNextState - MRS CWL=6 after DFS (due to DLL-off mode) */
reg |= (0x1 << REG_DFS_CWL_NEXT_STATE_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Poll - Wait for APLL + ADLLs lock on new frequency */
do {
reg = (reg_read(REG_PHY_LOCK_STATUS_ADDR)) &
REG_PHY_LOCK_APLL_ADLL_STATUS_MASK;
/* 0x1674 [10:0] - Phy lock status Register */
} while (reg != REG_PHY_LOCK_APLL_ADLL_STATUS_MASK);
/* Configure - Reset the PHY Read FIFO and Write channels - Set Reset */
reg = (reg_read(REG_SDRAM_CONFIG_ADDR) & REG_SDRAM_CONFIG_MASK);
/* [30:29] = 0 - Data Pup R/W path reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
/*
* Configure - DRAM Data PHY Read [30], Write [29] path
* reset - Release Reset
*/
reg = (reg_read(REG_SDRAM_CONFIG_ADDR) | ~REG_SDRAM_CONFIG_MASK);
/* [30:29] = '11' - Data Pup R/W path reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
/* Registered DIMM support */
if (dram_info->reg_dimm) {
/*
* Configure - Change register DRAM operating speed
* (below 400MHz) - CWA_RC
*/
reg = (0xA & REG_SDRAM_OPERATION_CWA_RC_MASK) <<
REG_SDRAM_OPERATION_CWA_RC_OFFS;
/*
* Configure - Change register DRAM operating speed
* (below 400MHz) - CWA_DATA
*/
reg |= ((0x0 & REG_SDRAM_OPERATION_CWA_DATA_MASK) <<
REG_SDRAM_OPERATION_CWA_DATA_OFFS);
/* Configure - Set Delay - tSTAB */
reg |= (0x1 << REG_SDRAM_OPERATION_CWA_DELAY_SEL_OFFS);
/* Configure - Issue CWA command with the above parameters */
reg |= (REG_SDRAM_OPERATION_CMD_CWA &
~(0xF << REG_SDRAM_OPERATION_CS_OFFS));
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for CWA operation completion */
do {
reg = reg_read(REG_SDRAM_OPERATION_ADDR) &
(REG_SDRAM_OPERATION_CMD_MASK);
} while (reg);
}
/* Configure - Exit Self Refresh */
/* [2] - DfsSR */
reg = (reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_SR_OFFS));
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Poll - DFS Register - 0x1528 [3] - DfsAtSR - All DRAM devices
* on all ranks are NOT in self refresh mode
*/
do {
reg = ((reg_read(REG_DFS_ADDR)) & (1 << REG_DFS_ATSR_OFFS));
} while (reg); /* Wait for '0' */
/* Configure - Issue Refresh command */
/* [3-0] = 0x2 - Refresh Command, [11-8] - enabled Cs */
reg = REG_SDRAM_OPERATION_CMD_RFRS;
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs))
reg &= ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
}
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
/* Configure - Block new external transactions - Disable */
reg = reg_read(REG_DFS_ADDR);
reg &= ~(1 << REG_DFS_BLOCK_OFFS); /* [1] - DfsBlock - Disable */
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Configure - XBAR Retry response during Block to enable
* internal access - Disable
*/
reg = reg_read(REG_METAL_MASK_ADDR);
/* [0] - RetryMask - Enable */
reg |= (1 << REG_METAL_MASK_RETRY_OFFS);
/* 0x14B0 - Dunit MMask Register */
dfs_reg_write(REG_METAL_MASK_ADDR, reg);
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
/* Configure - Set CL */
reg = reg_read(REG_DDR3_MR0_CS_ADDR +
(cs << MR_CS_ADDR_OFFS)) &
~REG_DDR3_MR0_CL_MASK;
tmp = 0x4; /* CL=6 - 0x4 */
reg |= ((tmp & 0x1) << REG_DDR3_MR0_CL_OFFS);
reg |= ((tmp & 0xE) << REG_DDR3_MR0_CL_HIGH_OFFS);
dfs_reg_write(REG_DDR3_MR0_CS_ADDR +
(cs << MR_CS_ADDR_OFFS), reg);
/* Configure - Set CWL */
reg = reg_read(REG_DDR3_MR2_CS_ADDR +
(cs << MR_CS_ADDR_OFFS))
& ~(REG_DDR3_MR2_CWL_MASK << REG_DDR3_MR2_CWL_OFFS);
/* CWL=6 - 0x1 */
reg |= ((0x1) << REG_DDR3_MR2_CWL_OFFS);
dfs_reg_write(REG_DDR3_MR2_CS_ADDR +
(cs << MR_CS_ADDR_OFFS), reg);
}
}
DEBUG_DFS_C("DDR3 - DFS - High To Low - Ended successfuly - new Frequency - ",
freq, 1);
return MV_OK;
#else
/* This Flow is relevant for Armada370 A0 and ArmadaXP Z1 */
u32 reg, freq_par;
u32 cs = 0;
DEBUG_DFS_C("DDR3 - DFS - High To Low - Starting DFS procedure to Frequency - ",
freq, 1);
/* target frequency - 100MHz */
freq_par = ddr3_get_freq_parameter(freq, 0);
reg = 0x0000FF00;
/* 0x18700 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg);
/* 0x1600 - ODPG_CNTRL_Control */
reg = reg_read(REG_ODPG_CNTRL_ADDR);
/* [21] = 1 - auto refresh disable */
reg |= (1 << REG_ODPG_CNTRL_OFFS);
dfs_reg_write(REG_ODPG_CNTRL_ADDR, reg);
/* 0x1670 - PHY lock mask register */
reg = reg_read(REG_PHY_LOCK_MASK_ADDR);
reg &= REG_PHY_LOCK_MASK_MASK; /* [11:0] = 0 */
dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg);
reg = reg_read(REG_DFS_ADDR); /* 0x1528 - DFS register */
/* Disable reconfig */
reg &= ~0x10; /* [4] - Enable reconfig MR registers after DFS_ERG */
reg |= 0x1; /* [0] - DRAM DLL disabled after DFS */
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
reg = reg_read(REG_METAL_MASK_ADDR) & ~(1 << 0); /* [0] - disable */
/* 0x14B0 - Dunit MMask Register */
dfs_reg_write(REG_METAL_MASK_ADDR, reg);
/* [1] - DFS Block enable */
reg = reg_read(REG_DFS_ADDR) | (1 << REG_DFS_BLOCK_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* [2] - DFS Self refresh enable */
reg = reg_read(REG_DFS_ADDR) | (1 << REG_DFS_SR_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Poll DFS Register - 0x1528 [3] - DfsAtSR -
* All DRAM devices on all ranks are in self refresh mode -
* DFS can be executed afterwards
*/
do {
reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS);
} while (reg == 0x0); /* Wait for '1' */
/* Disable ODT on DLL-off mode */
dfs_reg_write(REG_SDRAM_ODT_CTRL_HIGH_ADDR,
REG_SDRAM_ODT_CTRL_HIGH_OVRD_MASK);
/* [11:0] = 0 */
reg = (reg_read(REG_PHY_LOCK_MASK_ADDR) & REG_PHY_LOCK_MASK_MASK);
/* 0x1670 - PHY lock mask register */
dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg);
/* Add delay between entering SR and start ratio modification */
udelay(1);
/*
* Initial Setup - assure that the "load new ratio" is clear (bit 24)
* and in the same chance, block reassertions of reset [15:8] and
* force reserved bits[7:0].
*/
reg = 0x0000FDFF;
/* 0x18700 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
/*
* RelaX whenever reset is asserted to that channel (good for any case)
*/
reg = 0x0000FF00;
/* 0x18700 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg);
reg = reg_read(REG_CPU_DIV_CLK_CTRL_3_ADDR) &
REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK;
/* Full Integer ratio from PLL-out to ddr-clk */
reg |= (freq_par << REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS);
/* 0x1870C - CPU Div CLK control 3 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_3_ADDR, reg);
/*
* Shut off clock enable to the DDRPHY clock channel (this is the "D").
* All the rest are kept as is (forced, but could be read-modify-write).
* This is done now by RMW above.
*/
/* Clock is not shut off gracefully - keep it running */
reg = 0x000FFF02;
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_4_ADDR, reg);
/* Wait before replacing the clock on the DDR Phy Channel. */
udelay(1);
/*
* This for triggering the frequency update. Bit[24] is the
* central control
* bits [23:16] == which channels to change ==2 ==> only DDR Phy
* (smooth transition)
* bits [15:8] == mask reset reassertion due to clock modification
* to these channels.
* bits [7:0] == not in use
*/
reg = 0x0102FDFF;
/* 0x18700 - CPU Div CLK control 0 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
udelay(1); /* Wait 1usec */
/*
* Poll Div CLK status 0 register - indication that the clocks
* are active - 0x18718 [8]
*/
do {
reg = (reg_read(REG_CPU_DIV_CLK_STATUS_0_ADDR)) &
(1 << REG_CPU_DIV_CLK_ALL_STABLE_OFFS);
} while (reg == 0);
/*
* Clean the CTRL0, to be ready for next resets and next requests of
* ratio modifications.
*/
reg = 0x000000FF;
/* 0x18700 - CPU Div CLK control 0 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
udelay(5);
/* Switch HCLK Mux to training clk (100Mhz), keep DFS request bit */
reg = 0x20050000;
/* 0x18488 - DRAM Init control status register */
dfs_reg_write(REG_DRAM_INIT_CTRL_STATUS_ADDR, reg);
reg = reg_read(REG_DDR_IO_ADDR) & ~(1 << REG_DDR_IO_CLK_RATIO_OFFS);
/* [15] = 0 - Set 1:1 Ratio between Dunit and Phy */
dfs_reg_write(REG_DDR_IO_ADDR, reg); /* 0x1524 - DDR IO Regist */
reg = reg_read(REG_DRAM_PHY_CONFIG_ADDR) & REG_DRAM_PHY_CONFIG_MASK;
/* [31:30]] - reset pup data ctrl ADLL */
/* 0x15EC - DRAM PHY Config register */
dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg);
reg = (reg_read(REG_DRAM_PHY_CONFIG_ADDR) | ~REG_DRAM_PHY_CONFIG_MASK);
/* [31:30] - normal pup data ctrl ADLL */
/* 0x15EC - DRAM PHY Config register */
dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg);
udelay(1); /* Wait 1usec */
/* 0x1404 */
reg = (reg_read(REG_DUNIT_CTRL_LOW_ADDR) & 0xFFFFFFE7);
dfs_reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg);
/* Poll Phy lock status register - APLL lock indication - 0x1674 */
do {
reg = (reg_read(REG_PHY_LOCK_STATUS_ADDR)) &
REG_PHY_LOCK_STATUS_LOCK_MASK;
} while (reg != REG_PHY_LOCK_STATUS_LOCK_MASK); /* Wait for '0xFFF' */
reg = (reg_read(REG_SDRAM_CONFIG_ADDR) & REG_SDRAM_CONFIG_MASK);
/* [30:29] = 0 - Data Pup R/W path reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
reg = reg_read(REG_SDRAM_CONFIG_ADDR) | ~REG_SDRAM_CONFIG_MASK;
/* [30:29] = '11' - Data Pup R/W path reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
udelay(1000); /* Wait 1msec */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
/* Config CL and CWL with MR0 and MR2 registers */
reg = reg_read(REG_DDR3_MR0_ADDR);
reg &= ~0x74; /* CL [3:0]; [6:4],[2] */
reg |= (1 << 5); /* CL = 4, CAS is 6 */
dfs_reg_write(REG_DDR3_MR0_ADDR, reg);
reg = REG_SDRAM_OPERATION_CMD_MR0 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
reg = reg_read(REG_DDR3_MR2_ADDR);
reg &= ~0x38; /* CWL [5:3] */
reg |= (1 << 3); /* CWL = 1, CWL is 6 */
dfs_reg_write(REG_DDR3_MR2_ADDR, reg);
reg = REG_SDRAM_OPERATION_CMD_MR2 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
/* Set current rd_sample_delay */
reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR);
reg &= ~(REG_READ_DATA_SAMPLE_DELAYS_MASK <<
(REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs));
reg |= (5 << (REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs));
dfs_reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR, reg);
/* Set current rd_ready_delay */
reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR);
reg &= ~(REG_READ_DATA_READY_DELAYS_MASK <<
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
reg |= ((6) << (REG_READ_DATA_READY_DELAYS_OFFS * cs));
dfs_reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg);
}
}
/* [2] - DFS Self refresh disable */
reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_SR_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* [1] - DFS Block enable */
reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_BLOCK_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Poll DFS Register - 0x1528 [3] - DfsAtSR -
* All DRAM devices on all ranks are in self refresh mode - DFS can
* be executed afterwards
*/
do {
reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS);
} while (reg); /* Wait for '1' */
reg = (reg_read(REG_METAL_MASK_ADDR) | (1 << 0));
/* [0] - Enable Dunit to crossbar retry */
/* 0x14B0 - Dunit MMask Register */
dfs_reg_write(REG_METAL_MASK_ADDR, reg);
/* 0x1600 - PHY lock mask register */
reg = reg_read(REG_ODPG_CNTRL_ADDR);
reg &= ~(1 << REG_ODPG_CNTRL_OFFS); /* [21] = 0 */
dfs_reg_write(REG_ODPG_CNTRL_ADDR, reg);
/* 0x1670 - PHY lock mask register */
reg = reg_read(REG_PHY_LOCK_MASK_ADDR);
reg |= ~REG_PHY_LOCK_MASK_MASK; /* [11:0] = FFF */
dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg);
DEBUG_DFS_C("DDR3 - DFS - High To Low - Ended successfuly - new Frequency - ",
freq, 1);
return MV_OK;
#endif
}
/*
* Name: ddr3_dfs_low_2_high
* Desc:
* Args: freq - target frequency
* Notes:
* Returns: MV_OK - success, MV_FAIL - fail
*/
int ddr3_dfs_low_2_high(u32 freq, int ratio_2to1, MV_DRAM_INFO *dram_info)
{
#if defined(MV88F78X60) || defined(MV88F672X)
/* This Flow is relevant for ArmadaXP A0 */
u32 reg, freq_par, tmp;
u32 cs = 0;
DEBUG_DFS_C("DDR3 - DFS - Low To High - Starting DFS procedure to Frequency - ",
freq, 1);
/* target frequency - freq */
freq_par = ddr3_get_freq_parameter(freq, ratio_2to1);
#if defined(MV88F672X)
u32 hclk;
u32 cpu_freq = ddr3_get_cpu_freq();
get_target_freq(cpu_freq, &tmp, &hclk);
#endif
/* Configure - DRAM DLL final state after DFS is complete - Enable */
reg = reg_read(REG_DFS_ADDR);
/* [0] - DfsDllNextState - Enable */
reg &= ~(1 << REG_DFS_DLLNEXTSTATE_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Configure - XBAR Retry response during Block to enable
* internal access - Disable
*/
reg = reg_read(REG_METAL_MASK_ADDR);
/* [0] - RetryMask - Disable */
reg &= ~(1 << REG_METAL_MASK_RETRY_OFFS);
/* 0x14B0 - Dunit MMask Register */
dfs_reg_write(REG_METAL_MASK_ADDR, reg);
/* Configure - Block new external transactions - Enable */
reg = reg_read(REG_DFS_ADDR);
reg |= (1 << REG_DFS_BLOCK_OFFS); /* [1] - DfsBlock - Enable */
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Configure - Move DRAM into Self Refresh */
reg = reg_read(REG_DFS_ADDR);
reg |= (1 << REG_DFS_SR_OFFS); /* [2] - DfsSR - Enable */
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Poll - Wait for Self Refresh indication */
do {
reg = ((reg_read(REG_DFS_ADDR)) & (1 << REG_DFS_ATSR_OFFS));
} while (reg == 0x0); /* 0x1528 [3] - DfsAtSR - Wait for '1' */
/* Start of clock change procedure (PLL) */
#if defined(MV88F672X)
/* avantaLP */
/* Configure cpupll_clkdiv_reset_mask */
reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0);
reg &= CPU_PLL_CLOCK_DIVIDER_CNTRL0_MASK;
/* 0xE8264[7:0] 0xff CPU Clock Dividers Reset mask */
dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, (reg + 0xFF));
/* Configure cpu_clkdiv_reload_smooth */
reg = reg_read(CPU_PLL_CNTRL0);
reg &= CPU_PLL_CNTRL0_RELOAD_SMOOTH_MASK;
/* 0xE8260 [15:8] 0x2 CPU Clock Dividers Reload Smooth enable */
dfs_reg_write(CPU_PLL_CNTRL0,
reg + (2 << CPU_PLL_CNTRL0_RELOAD_SMOOTH_OFFS));
/* Configure cpupll_clkdiv_relax_en */
reg = reg_read(CPU_PLL_CNTRL0);
reg &= CPU_PLL_CNTRL0_RELAX_EN_MASK;
/* 0xE8260 [31:24] 0x2 Relax Enable */
dfs_reg_write(CPU_PLL_CNTRL0,
reg + (2 << CPU_PLL_CNTRL0_RELAX_EN_OFFS));
/* Configure cpupll_clkdiv_ddr_clk_ratio */
reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL1);
/*
* 0xE8268 [13:8] N Set Training clock:
* APLL Out Clock (VCO freq) / N = 100 MHz
*/
reg &= CPU_PLL_CLOCK_DIVIDER_CNTRL1_MASK;
reg |= (freq_par << 8); /* full Integer ratio from PLL-out to ddr-clk */
dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL1, reg);
/* Configure cpupll_clkdiv_reload_ratio */
reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0);
reg &= CPU_PLL_CLOCK_RELOAD_RATIO_MASK;
/* 0xE8264 [8]=0x1 CPU Clock Dividers Reload Ratio trigger set */
dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0,
reg + (1 << CPU_PLL_CLOCK_RELOAD_RATIO_OFFS));
udelay(1);
/* Configure cpupll_clkdiv_reload_ratio */
reg = reg_read(CPU_PLL_CLOCK_DIVIDER_CNTRL0);
reg &= CPU_PLL_CLOCK_RELOAD_RATIO_MASK;
/* 0xE8264 [8]=0x0 CPU Clock Dividers Reload Ratio trigger clear */
dfs_reg_write(CPU_PLL_CLOCK_DIVIDER_CNTRL0, reg);
udelay(5);
#else
/*
* Initial Setup - assure that the "load new ratio" is clear (bit 24)
* and in the same chance, block reassertions of reset [15:8]
* and force reserved bits[7:0].
*/
reg = 0x0000FFFF;
/* 0x18700 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
/*
* RelaX whenever reset is asserted to that channel (good for any case)
*/
reg = 0x0000FF00;
/* 0x18704 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg);
reg = reg_read(REG_CPU_DIV_CLK_CTRL_2_ADDR) &
REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK;
reg |= (freq_par << REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS);
/* full Integer ratio from PLL-out to ddr-clk */
/* 0x1870C - CPU Div CLK control 3 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_2_ADDR, reg);
/*
* Shut off clock enable to the DDRPHY clock channel (this is the "D").
* All the rest are kept as is (forced, but could be read-modify-write).
* This is done now by RMW above.
*/
reg = 0x000FFF02;
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_4_ADDR, reg);
/* Wait before replacing the clock on the DDR Phy Channel. */
udelay(1);
reg = 0x0102FDFF;
/*
* This for triggering the frequency update. Bit[24] is the
* central control
* bits [23:16] == which channels to change ==2 ==> only DDR Phy
* (smooth transition)
* bits [15:8] == mask reset reassertion due to clock modification
* to these channels.
* bits [7:0] == not in use
*/
/* 0x18700 - CPU Div CLK control 0 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
udelay(1);
/*
* Poll Div CLK status 0 register - indication that the clocks
* are active - 0x18718 [8]
*/
do {
reg = reg_read(REG_CPU_DIV_CLK_STATUS_0_ADDR) &
(1 << REG_CPU_DIV_CLK_ALL_STABLE_OFFS);
} while (reg == 0);
reg = 0x000000FF;
/*
* Clean the CTRL0, to be ready for next resets and next requests
* of ratio modifications.
*/
/* 0x18700 - CPU Div CLK control 0 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
#endif
/* End of clock change procedure (PLL) */
if (ratio_2to1) {
/* Configure - Select normal clock for the DDR PHY - Disable */
reg = reg_read(REG_DRAM_INIT_CTRL_STATUS_ADDR);
/* [16] - ddr_phy_trn_clk_sel - Disable */
reg &= ~(1 << REG_DRAM_INIT_CTRL_TRN_CLK_OFFS);
/* 0x18488 - DRAM Init control status register */
dfs_reg_write(REG_DRAM_INIT_CTRL_STATUS_ADDR, reg);
}
/*
* Configure - Set Correct Ratio - according to target ratio
* parameter - 2:1/1:1
*/
if (ratio_2to1) {
/*
* [15] - Phy2UnitClkRatio = 1 - Set 2:1 Ratio between
* Dunit and Phy
*/
reg = reg_read(REG_DDR_IO_ADDR) |
(1 << REG_DDR_IO_CLK_RATIO_OFFS);
} else {
/*
* [15] - Phy2UnitClkRatio = 0 - Set 1:1 Ratio between
* Dunit and Phy
*/
reg = reg_read(REG_DDR_IO_ADDR) &
~(1 << REG_DDR_IO_CLK_RATIO_OFFS);
}
dfs_reg_write(REG_DDR_IO_ADDR, reg); /* 0x1524 - DDR IO Register */
/* Configure - 2T Mode - Restore original configuration */
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR);
/* [3:4] 2T - Restore value */
reg &= ~(REG_DUNIT_CTRL_LOW_2T_MASK << REG_DUNIT_CTRL_LOW_2T_OFFS);
reg |= ((dram_info->mode_2t & REG_DUNIT_CTRL_LOW_2T_MASK) <<
REG_DUNIT_CTRL_LOW_2T_OFFS);
/* 0x1404 - DDR Controller Control Low Register */
dfs_reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg);
/* Configure - Restore CL and CWL - MRS Commands */
reg = reg_read(REG_DFS_ADDR);
reg &= ~(REG_DFS_CL_NEXT_STATE_MASK << REG_DFS_CL_NEXT_STATE_OFFS);
reg &= ~(REG_DFS_CWL_NEXT_STATE_MASK << REG_DFS_CWL_NEXT_STATE_OFFS);
if (freq == DDR_400) {
if (dram_info->target_frequency == 0x8)
tmp = ddr3_cl_to_valid_cl(5);
else
tmp = ddr3_cl_to_valid_cl(6);
} else {
tmp = ddr3_cl_to_valid_cl(dram_info->cl);
}
/* [8] - DfsCLNextState */
reg |= ((tmp & REG_DFS_CL_NEXT_STATE_MASK) << REG_DFS_CL_NEXT_STATE_OFFS);
if (freq == DDR_400) {
/* [12] - DfsCWLNextState */
reg |= (((0) & REG_DFS_CWL_NEXT_STATE_MASK) <<
REG_DFS_CWL_NEXT_STATE_OFFS);
} else {
/* [12] - DfsCWLNextState */
reg |= (((dram_info->cwl) & REG_DFS_CWL_NEXT_STATE_MASK) <<
REG_DFS_CWL_NEXT_STATE_OFFS);
}
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Optional - Configure - DDR3_Rtt_nom_CS# */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
reg = reg_read(REG_DDR3_MR1_CS_ADDR +
(cs << MR_CS_ADDR_OFFS));
reg &= REG_DDR3_MR1_RTT_MASK;
reg |= odt_static[dram_info->cs_ena][cs];
dfs_reg_write(REG_DDR3_MR1_CS_ADDR +
(cs << MR_CS_ADDR_OFFS), reg);
}
}
/* Configure - Reset ADLLs - Set Reset */
reg = reg_read(REG_DRAM_PHY_CONFIG_ADDR) & REG_DRAM_PHY_CONFIG_MASK;
/* [31:30]] - reset pup data ctrl ADLL */
/* 0x15EC - DRAM PHY Config Register */
dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg);
/* Configure - Reset ADLLs - Release Reset */
reg = reg_read(REG_DRAM_PHY_CONFIG_ADDR) | ~REG_DRAM_PHY_CONFIG_MASK;
/* [31:30] - normal pup data ctrl ADLL */
/* 0x15EC - DRAM PHY Config register */
dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg);
/* Poll - Wait for APLL + ADLLs lock on new frequency */
do {
reg = reg_read(REG_PHY_LOCK_STATUS_ADDR) &
REG_PHY_LOCK_APLL_ADLL_STATUS_MASK;
/* 0x1674 [10:0] - Phy lock status Register */
} while (reg != REG_PHY_LOCK_APLL_ADLL_STATUS_MASK);
/* Configure - Reset the PHY SDR clock divider */
if (ratio_2to1) {
/* Pup Reset Divider B - Set Reset */
/* [28] - DataPupRdRST = 0 */
reg = reg_read(REG_SDRAM_CONFIG_ADDR) &
~(1 << REG_SDRAM_CONFIG_PUPRSTDIV_OFFS);
/* [28] - DataPupRdRST = 1 */
tmp = reg_read(REG_SDRAM_CONFIG_ADDR) |
(1 << REG_SDRAM_CONFIG_PUPRSTDIV_OFFS);
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
/* Pup Reset Divider B - Release Reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, tmp);
}
/* Configure - Reset the PHY Read FIFO and Write channels - Set Reset */
reg = reg_read(REG_SDRAM_CONFIG_ADDR) & REG_SDRAM_CONFIG_MASK;
/* [30:29] = 0 - Data Pup R/W path reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
/*
* Configure - DRAM Data PHY Read [30], Write [29] path reset -
* Release Reset
*/
reg = reg_read(REG_SDRAM_CONFIG_ADDR) | ~REG_SDRAM_CONFIG_MASK;
/* [30:29] = '11' - Data Pup R/W path reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
/* Registered DIMM support */
if (dram_info->reg_dimm) {
/*
* Configure - Change register DRAM operating speed
* (DDR3-1333 / DDR3-1600) - CWA_RC
*/
reg = (0xA & REG_SDRAM_OPERATION_CWA_RC_MASK) <<
REG_SDRAM_OPERATION_CWA_RC_OFFS;
if (freq <= DDR_400) {
/*
* Configure - Change register DRAM operating speed
* (DDR3-800) - CWA_DATA
*/
reg |= ((0x0 & REG_SDRAM_OPERATION_CWA_DATA_MASK) <<
REG_SDRAM_OPERATION_CWA_DATA_OFFS);
} else if ((freq > DDR_400) && (freq <= DDR_533)) {
/*
* Configure - Change register DRAM operating speed
* (DDR3-1066) - CWA_DATA
*/
reg |= ((0x1 & REG_SDRAM_OPERATION_CWA_DATA_MASK) <<
REG_SDRAM_OPERATION_CWA_DATA_OFFS);
} else if ((freq > DDR_533) && (freq <= DDR_666)) {
/*
* Configure - Change register DRAM operating speed
* (DDR3-1333) - CWA_DATA
*/
reg |= ((0x2 & REG_SDRAM_OPERATION_CWA_DATA_MASK) <<
REG_SDRAM_OPERATION_CWA_DATA_OFFS);
} else {
/*
* Configure - Change register DRAM operating speed
* (DDR3-1600) - CWA_DATA
*/
reg |= ((0x3 & REG_SDRAM_OPERATION_CWA_DATA_MASK) <<
REG_SDRAM_OPERATION_CWA_DATA_OFFS);
}
/* Configure - Set Delay - tSTAB */
reg |= (0x1 << REG_SDRAM_OPERATION_CWA_DELAY_SEL_OFFS);
/* Configure - Issue CWA command with the above parameters */
reg |= (REG_SDRAM_OPERATION_CMD_CWA &
~(0xF << REG_SDRAM_OPERATION_CS_OFFS));
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for CWA operation completion */
do {
reg = reg_read(REG_SDRAM_OPERATION_ADDR) &
REG_SDRAM_OPERATION_CMD_MASK;
} while (reg);
}
/* Configure - Exit Self Refresh */
/* [2] - DfsSR */
reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_SR_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Poll - DFS Register - 0x1528 [3] - DfsAtSR - All DRAM
* devices on all ranks are NOT in self refresh mode
*/
do {
reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS);
} while (reg); /* Wait for '0' */
/* Configure - Issue Refresh command */
/* [3-0] = 0x2 - Refresh Command, [11-8] - enabled Cs */
reg = REG_SDRAM_OPERATION_CMD_RFRS;
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs))
reg &= ~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
}
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
/* Configure - Block new external transactions - Disable */
reg = reg_read(REG_DFS_ADDR);
reg &= ~(1 << REG_DFS_BLOCK_OFFS); /* [1] - DfsBlock - Disable */
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Configure - XBAR Retry response during Block to enable
* internal access - Disable
*/
reg = reg_read(REG_METAL_MASK_ADDR);
/* [0] - RetryMask - Enable */
reg |= (1 << REG_METAL_MASK_RETRY_OFFS);
/* 0x14B0 - Dunit MMask Register */
dfs_reg_write(REG_METAL_MASK_ADDR, reg);
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
/* Configure - Set CL */
reg = reg_read(REG_DDR3_MR0_CS_ADDR +
(cs << MR_CS_ADDR_OFFS)) &
~REG_DDR3_MR0_CL_MASK;
if (freq == DDR_400)
tmp = ddr3_cl_to_valid_cl(6);
else
tmp = ddr3_cl_to_valid_cl(dram_info->cl);
reg |= ((tmp & 0x1) << REG_DDR3_MR0_CL_OFFS);
reg |= ((tmp & 0xE) << REG_DDR3_MR0_CL_HIGH_OFFS);
dfs_reg_write(REG_DDR3_MR0_CS_ADDR +
(cs << MR_CS_ADDR_OFFS), reg);
/* Configure - Set CWL */
reg = reg_read(REG_DDR3_MR2_CS_ADDR +
(cs << MR_CS_ADDR_OFFS)) &
~(REG_DDR3_MR2_CWL_MASK << REG_DDR3_MR2_CWL_OFFS);
if (freq == DDR_400)
reg |= ((0) << REG_DDR3_MR2_CWL_OFFS);
else
reg |= ((dram_info->cwl) << REG_DDR3_MR2_CWL_OFFS);
dfs_reg_write(REG_DDR3_MR2_CS_ADDR +
(cs << MR_CS_ADDR_OFFS), reg);
}
}
DEBUG_DFS_C("DDR3 - DFS - Low To High - Ended successfuly - new Frequency - ",
freq, 1);
return MV_OK;
#else
/* This Flow is relevant for Armada370 A0 and ArmadaXP Z1 */
u32 reg, freq_par, tmp;
u32 cs = 0;
DEBUG_DFS_C("DDR3 - DFS - Low To High - Starting DFS procedure to Frequency - ",
freq, 1);
/* target frequency - freq */
freq_par = ddr3_get_freq_parameter(freq, ratio_2to1);
reg = 0x0000FF00;
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg);
/* 0x1600 - PHY lock mask register */
reg = reg_read(REG_ODPG_CNTRL_ADDR);
reg |= (1 << REG_ODPG_CNTRL_OFFS); /* [21] = 1 */
dfs_reg_write(REG_ODPG_CNTRL_ADDR, reg);
/* 0x1670 - PHY lock mask register */
reg = reg_read(REG_PHY_LOCK_MASK_ADDR);
reg &= REG_PHY_LOCK_MASK_MASK; /* [11:0] = 0 */
dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg);
/* Enable reconfig MR Registers after DFS */
reg = reg_read(REG_DFS_ADDR); /* 0x1528 - DFS register */
/* [4] - Disable - reconfig MR registers after DFS_ERG */
reg &= ~0x11;
/* [0] - Enable - DRAM DLL after DFS */
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Disable DRAM Controller to crossbar retry */
/* [0] - disable */
reg = reg_read(REG_METAL_MASK_ADDR) & ~(1 << 0);
/* 0x14B0 - Dunit MMask Register */
dfs_reg_write(REG_METAL_MASK_ADDR, reg);
/* Enable DRAM Blocking */
/* [1] - DFS Block enable */
reg = reg_read(REG_DFS_ADDR) | (1 << REG_DFS_BLOCK_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Enable Self refresh */
/* [2] - DFS Self refresh enable */
reg = reg_read(REG_DFS_ADDR) | (1 << REG_DFS_SR_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Poll DFS Register - All DRAM devices on all ranks are in
* self refresh mode - DFS can be executed afterwards
*/
/* 0x1528 [3] - DfsAtSR */
do {
reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS);
} while (reg == 0x0); /* Wait for '1' */
/*
* Set Correct Ratio - if freq>MARGIN_FREQ use 2:1 ratio
* else use 1:1 ratio
*/
if (ratio_2to1) {
/* [15] = 1 - Set 2:1 Ratio between Dunit and Phy */
reg = reg_read(REG_DDR_IO_ADDR) |
(1 << REG_DDR_IO_CLK_RATIO_OFFS);
} else {
/* [15] = 0 - Set 1:1 Ratio between Dunit and Phy */
reg = reg_read(REG_DDR_IO_ADDR) &
~(1 << REG_DDR_IO_CLK_RATIO_OFFS);
}
dfs_reg_write(REG_DDR_IO_ADDR, reg); /* 0x1524 - DDR IO Register */
/* Switch HCLK Mux from (100Mhz) [16]=0, keep DFS request bit */
reg = 0x20040000;
/*
* [29] - training logic request DFS, [28:27] -
* preload patterns frequency [18]
*/
/* 0x18488 - DRAM Init control status register */
dfs_reg_write(REG_DRAM_INIT_CTRL_STATUS_ADDR, reg);
/* Add delay between entering SR and start ratio modification */
udelay(1);
/*
* Initial Setup - assure that the "load new ratio" is clear (bit 24)
* and in the same chance, block reassertions of reset [15:8] and
* force reserved bits[7:0].
*/
reg = 0x0000FFFF;
/* 0x18700 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
/*
* RelaX whenever reset is asserted to that channel (good for any case)
*/
reg = 0x0000FF00;
/* 0x18704 - CPU Div CLK control 0 */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_1_ADDR, reg);
reg = reg_read(REG_CPU_DIV_CLK_CTRL_3_ADDR) &
REG_CPU_DIV_CLK_CTRL_3_FREQ_MASK;
reg |= (freq_par << REG_CPU_DIV_CLK_CTRL_3_FREQ_OFFS);
/* Full Integer ratio from PLL-out to ddr-clk */
/* 0x1870C - CPU Div CLK control 3 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_3_ADDR, reg);
/*
* Shut off clock enable to the DDRPHY clock channel (this is the "D").
* All the rest are kept as is (forced, but could be read-modify-write).
* This is done now by RMW above.
*/
reg = 0x000FFF02;
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_4_ADDR, reg);
/* Wait before replacing the clock on the DDR Phy Channel. */
udelay(1);
reg = 0x0102FDFF;
/*
* This for triggering the frequency update. Bit[24] is the
* central control
* bits [23:16] == which channels to change ==2 ==> only DDR Phy
* (smooth transition)
* bits [15:8] == mask reset reassertion due to clock modification
* to these channels.
* bits [7:0] == not in use
*/
/* 0x18700 - CPU Div CLK control 0 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
udelay(1);
/*
* Poll Div CLK status 0 register - indication that the clocks are
* active - 0x18718 [8]
*/
do {
reg = reg_read(REG_CPU_DIV_CLK_STATUS_0_ADDR) &
(1 << REG_CPU_DIV_CLK_ALL_STABLE_OFFS);
} while (reg == 0);
reg = 0x000000FF;
/*
* Clean the CTRL0, to be ready for next resets and next requests of
* ratio modifications.
*/
/* 0x18700 - CPU Div CLK control 0 register */
dfs_reg_write(REG_CPU_DIV_CLK_CTRL_0_ADDR, reg);
udelay(5);
if (ratio_2to1) {
/* Pup Reset Divider B - Set Reset */
/* [28] = 0 - Pup Reset Divider B */
reg = reg_read(REG_SDRAM_CONFIG_ADDR) & ~(1 << 28);
/* [28] = 1 - Pup Reset Divider B */
tmp = reg_read(REG_SDRAM_CONFIG_ADDR) | (1 << 28);
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
/* Pup Reset Divider B - Release Reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, tmp);
}
/* DRAM Data PHYs ADLL Reset - Set Reset */
reg = (reg_read(REG_DRAM_PHY_CONFIG_ADDR) & REG_DRAM_PHY_CONFIG_MASK);
/* [31:30]] - reset pup data ctrl ADLL */
/* 0x15EC - DRAM PHY Config Register */
dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg);
udelay(25);
/* APLL lock indication - Poll Phy lock status Register - 0x1674 [9] */
do {
reg = reg_read(REG_PHY_LOCK_STATUS_ADDR) &
(1 << REG_PHY_LOCK_STATUS_LOCK_OFFS);
} while (reg == 0);
/* DRAM Data PHYs ADLL Reset - Release Reset */
reg = reg_read(REG_DRAM_PHY_CONFIG_ADDR) | ~REG_DRAM_PHY_CONFIG_MASK;
/* [31:30] - normal pup data ctrl ADLL */
/* 0x15EC - DRAM PHY Config register */
dfs_reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg);
udelay(10000); /* Wait 10msec */
/*
* APLL lock indication - Poll Phy lock status Register - 0x1674 [11:0]
*/
do {
reg = reg_read(REG_PHY_LOCK_STATUS_ADDR) &
REG_PHY_LOCK_STATUS_LOCK_MASK;
} while (reg != REG_PHY_LOCK_STATUS_LOCK_MASK);
/* DRAM Data PHY Read [30], Write [29] path reset - Set Reset */
reg = reg_read(REG_SDRAM_CONFIG_ADDR) & REG_SDRAM_CONFIG_MASK;
/* [30:29] = 0 - Data Pup R/W path reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
/* DRAM Data PHY Read [30], Write [29] path reset - Release Reset */
reg = reg_read(REG_SDRAM_CONFIG_ADDR) | ~REG_SDRAM_CONFIG_MASK;
/* [30:29] = '11' - Data Pup R/W path reset */
/* 0x1400 - SDRAM Configuration register */
dfs_reg_write(REG_SDRAM_CONFIG_ADDR, reg);
/* Disable DFS Reconfig */
reg = reg_read(REG_DFS_ADDR) & ~(1 << 4);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* [2] - DFS Self refresh disable */
reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_SR_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/*
* Poll DFS Register - 0x1528 [3] - DfsAtSR - All DRAM devices on
* all ranks are NOT in self refresh mode
*/
do {
reg = reg_read(REG_DFS_ADDR) & (1 << REG_DFS_ATSR_OFFS);
} while (reg); /* Wait for '0' */
/* 0x1404 */
reg = (reg_read(REG_DUNIT_CTRL_LOW_ADDR) & 0xFFFFFFE7) | 0x2;
/* Configure - 2T Mode - Restore original configuration */
/* [3:4] 2T - Restore value */
reg &= ~(REG_DUNIT_CTRL_LOW_2T_MASK << REG_DUNIT_CTRL_LOW_2T_OFFS);
reg |= ((dram_info->mode_2t & REG_DUNIT_CTRL_LOW_2T_MASK) <<
REG_DUNIT_CTRL_LOW_2T_OFFS);
dfs_reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg);
udelay(1); /* Wait 1us */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
reg = (reg_read(REG_DDR3_MR1_ADDR));
/* DLL Enable */
reg &= ~(1 << REG_DDR3_MR1_DLL_ENA_OFFS);
dfs_reg_write(REG_DDR3_MR1_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
/* DLL Reset - MR0 */
reg = reg_read(REG_DDR3_MR0_ADDR);
dfs_reg_write(REG_DDR3_MR0_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR0 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
reg = reg_read(REG_DDR3_MR0_ADDR);
reg &= ~0x74; /* CL [3:0]; [6:4],[2] */
if (freq == DDR_400)
tmp = ddr3_cl_to_valid_cl(6) & 0xF;
else
tmp = ddr3_cl_to_valid_cl(dram_info->cl) & 0xF;
reg |= ((tmp & 0x1) << 2);
reg |= ((tmp >> 1) << 4); /* to bit 4 */
dfs_reg_write(REG_DDR3_MR0_ADDR, reg);
reg = REG_SDRAM_OPERATION_CMD_MR0 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
reg = reg_read(REG_DDR3_MR2_ADDR);
reg &= ~0x38; /* CWL [5:3] */
/* CWL = 0 ,for 400 MHg is 5 */
if (freq != DDR_400)
reg |= dram_info->cwl << REG_DDR3_MR2_CWL_OFFS;
dfs_reg_write(REG_DDR3_MR2_ADDR, reg);
reg = REG_SDRAM_OPERATION_CMD_MR2 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/* 0x1418 - SDRAM Operation Register */
dfs_reg_write(REG_SDRAM_OPERATION_ADDR, reg);
/* Poll - Wait for Refresh operation completion */
wait_refresh_op_complete();
/* Set current rd_sample_delay */
reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR);
reg &= ~(REG_READ_DATA_SAMPLE_DELAYS_MASK <<
(REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs));
reg |= (dram_info->cl <<
(REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs));
dfs_reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR, reg);
/* Set current rd_ready_delay */
reg = reg_read(REG_READ_DATA_READY_DELAYS_ADDR);
reg &= ~(REG_READ_DATA_READY_DELAYS_MASK <<
(REG_READ_DATA_READY_DELAYS_OFFS * cs));
reg |= ((dram_info->cl + 1) <<
(REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs));
dfs_reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg);
}
}
/* Enable ODT on DLL-on mode */
dfs_reg_write(REG_SDRAM_ODT_CTRL_HIGH_ADDR, 0);
/* [1] - DFS Block disable */
reg = reg_read(REG_DFS_ADDR) & ~(1 << REG_DFS_BLOCK_OFFS);
dfs_reg_write(REG_DFS_ADDR, reg); /* 0x1528 - DFS register */
/* Change DDR frequency to 100MHz procedure: */
/* 0x1600 - PHY lock mask register */
reg = reg_read(REG_ODPG_CNTRL_ADDR);
reg &= ~(1 << REG_ODPG_CNTRL_OFFS); /* [21] = 0 */
dfs_reg_write(REG_ODPG_CNTRL_ADDR, reg);
/* Change DDR frequency to 100MHz procedure: */
/* 0x1670 - PHY lock mask register */
reg = reg_read(REG_PHY_LOCK_MASK_ADDR);
reg |= ~REG_PHY_LOCK_MASK_MASK; /* [11:0] = FFF */
dfs_reg_write(REG_PHY_LOCK_MASK_ADDR, reg);
reg = reg_read(REG_METAL_MASK_ADDR) | (1 << 0); /* [0] - disable */
/* 0x14B0 - Dunit MMask Register */
dfs_reg_write(REG_METAL_MASK_ADDR, reg);
DEBUG_DFS_C("DDR3 - DFS - Low To High - Ended successfuly - new Frequency - ",
freq, 1);
return MV_OK;
#endif
}