u-boot/cpu/mpc824x/drivers/dma/dma.h
2001-11-28 17:49:55 +00:00

326 lines
10 KiB
C

#ifndef DMA_H
#define DMA_H
/*******************************************************
*
* copyright @ Motorola 1999
*
*******************************************************/
#define NUM_DMA_REG 7
#define DMA_MR_REG 0
#define DMA_SR_REG 1
#define DMA_CDAR_REG 2
#define DMA_SAR_REG 3
#define DMA_DAR_REG 4
#define DMA_BCR_REG 5
#define DMA_NDAR_REG 6
typedef enum _dmastatus
{
DMASUCCESS = 0x1000,
DMALMERROR,
DMAPERROR,
DMACHNBUSY,
DMAEOSINT,
DMAEOCAINT,
DMAINVALID,
DMANOEVENT,
} DMAStatus;
typedef enum _location
{
LOCAL = 0, /* local processor accesses on board DMA,
local processor's eumbbar is required */
REMOTE = 1, /* PCI master accesses DMA on I/O board,
I/O processor's pcsrbar is required */
} LOCATION;
typedef enum dma_mr_bit
{
IRQS = 0x00080000,
PDE = 0x00040000,
DAHTS = 0x00030000,
SAHTS = 0x0000c000,
DAHE = 0x00002000,
SAHE = 0x00001000,
PRC = 0x00000c00,
EIE = 0x00000080,
EOTIE = 0x00000040,
DL = 0x00000008,
CTM = 0x00000004,
CC = 0x00000002,
CS = 0x00000001,
} DMA_MR_BIT;
typedef enum dma_sr_bit
{
LME = 0x00000080,
PE = 0x00000010,
CB = 0x00000004,
EOSI = 0x00000002,
EOCAI = 0x00000001,
} DMA_SR_BIT;
/* structure for DMA Mode Register */
typedef struct _dma_mr
{
unsigned int reserved0 : 12;
unsigned int irqs : 1;
unsigned int pde : 1;
unsigned int dahts : 2;
unsigned int sahts : 2;
unsigned int dahe : 1;
unsigned int sahe : 1;
unsigned int prc : 2;
unsigned int reserved1 : 1;
unsigned int eie : 1;
unsigned int eotie : 1;
unsigned int reserved2 : 3;
unsigned int dl : 1;
unsigned int ctm : 1;
/* if chaining mode is enabled, any time, user can modify the
* descriptor and does not need to halt the current DMA transaction.
* Set CC bit, enable DMA to process the modified descriptors
* Hardware will clear this bit each time, DMA starts.
*/
unsigned int cc : 1;
/* cs bit has dua role, halt the current DMA transaction and
* (re)start DMA transaction. In chaining mode, if the descriptor
* needs modification, cs bit shall be used not the cc bit.
* Hardware will not set/clear this bit each time DMA transaction
* stops or starts. Software shall do it.
*
* cs bit shall not be used to halt chaining DMA transaction for
* modifying the descriptor. That is the role of CC bit.
*/
unsigned int cs : 1;
} DMA_MR;
/* structure for DMA Status register */
typedef struct _dma_sr
{
unsigned int reserved0 : 24;
unsigned int lme : 1;
unsigned int reserved1 : 2;
unsigned int pe : 1;
unsigned int reserved2 : 1;
unsigned int cb : 1;
unsigned int eosi : 1;
unsigned int eocai : 1;
} DMA_SR;
/* structure for DMA current descriptor address register */
typedef struct _dma_cdar
{
unsigned int cda : 27;
unsigned int snen : 1;
unsigned int eosie : 1;
unsigned int ctt : 2;
unsigned int eotd : 1;
} DMA_CDAR;
/* structure for DMA byte count register */
typedef struct _dma_bcr
{
unsigned int reserved : 6;
unsigned int bcr : 26;
} DMA_BCR;
/* structure for DMA Next Descriptor Address register */
typedef struct _dma_ndar
{
unsigned int nda : 27;
unsigned int ndsnen : 1;
unsigned int ndeosie: 1;
unsigned int ndctt : 2;
unsigned int eotd : 1;
} DMA_NDAR;
/* structure for DMA current transaction info */
typedef struct _dma_curr
{
unsigned int src_addr;
unsigned int dest_addr;
unsigned int byte_cnt;
} DMA_CURR;
/************************* Kernel API********************
* Kernel APIs are used to interface with O.S. kernel.
* They are the functions required by O.S. kernel to
* provide I/O service.
********************************************************/
/**************DMA Device Control Functions ********/
/**
* Note:
*
* In all following functions, the host (KAHLUA) processor has a
* choice of accessing on board local DMA (LOCAL),
* or DMA on a distributed KAHLUA (REMOTE). In either case,
* the caller shall pass the configured embedded utility memory
* block base address relative to the DMA. If LOCAL DMA is used,
* this parameter shall be EUMBBAR, if REMOTE is used, the
* parameter shall be the corresponding PCSRBAR.
**/
/**************************************************************
* function: DMA_Get_Stat
*
* description: return the content of status register of
* the given DMA channel
* if error, return DMAINVALID. Otherwise return
* DMASUCCESS.
*
**************************************************************/
static DMAStatus DMA_Get_Stat( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_SR * );
/**************************************************************
* function: DMA_Get_Mode
*
* description: return the content of mode register of the
* given DMA channel
* if error, return DMAINVALID. Otherwise return DMASUCCESS.
*
**************************************************************/
static DMAStatus DMA_Get_Mode( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_MR * );
/**************************************************************
* function: DMA_Set_Mode
*
* description: Set a new mode to a given DMA channel
* return DMASUCCESS if success, otherwise return DMACHNINVALID
*
* note: It is not a good idea of changing the DMA mode during
* the middle of a transaction.
**************************************************************/
static DMAStatus DMA_Set_Mode( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_MR mode );
/*************************************************************
* function: DMA_ISR
*
* description: DMA interrupt service routine
* return DMAStatus based on the status
*
*************************************************************/
static DMAStatus DMA_ISR( unsigned int eumbbar,
unsigned int channel,
DMAStatus (*lme_func)( unsigned int, unsigned int, DMAStatus ),
DMAStatus (*pe_func) ( unsigned int, unsigned int, DMAStatus ),
DMAStatus (*eosi_func)( unsigned int, unsigned int, DMAStatus ),
DMAStatus (*eocai_func)(unsigned int, unsigned int, DMAStatus ));
static DMAStatus dma_error_func( unsigned int, unsigned int, DMAStatus );
/********************* DMA I/O function ********************/
/************************************************************
* function: DMA_Start
*
* description: start a given DMA channel transaction
* return DMASUCCESS if success, otherwise return DMACHNINVALID
*
* note: this function will clear DMA_MR(CC) first, then
* set DMA_MR(CC).
***********************************************************/
static DMAStatus DMA_Start( LOCATION, unsigned int eumbbar,unsigned int channel );
/***********************************************************
* function: DMA_Halt
*
* description: halt the current dma transaction on the specified
* channel.
* return DMASUCCESS if success, otherwise return DMACHNINVALID
*
* note: if the specified DMA channel is idle, nothing happens
*************************************************************/
static DMAStatus DMA_Halt( LOCATION, unsigned int eumbbar,unsigned int channel );
/*************************************************************
* function: DMA_Chn_Cnt
*
* description: set the DMA_MR(CC) bit for a given channel
* that is in chaining mode.
* return DMASUCCESS if successfule, otherwise return DMACHNINVALID
*
* note: if the given channel is not in chaining mode, nothing
* happen.
*
*************************************************************/
static DMAStatus DMA_Chn_Cnt( LOCATION, unsigned int eumbbar,unsigned int channel );
/*********************** App. API ***************************
* App. API are the APIs Kernel provides for the application
* level program
************************************************************/
/**************************************************************
* function: DMA_Bld_Curr
*
* description: set current src, dest, byte count registers
* according to the desp for a given channel
*
* if the given channel is busy, no change made,
* return DMACHNBUSY.
*
* otherwise return DMASUCCESS.
*
* note:
**************************************************************/
static DMAStatus DMA_Bld_Curr( LOCATION,
unsigned int eumbbar,
unsigned int channel,
DMA_CURR desp );
/**************************************************************
* function: DMA_Poke_Curr
*
* description: poke the current src, dest, byte count registers
* for a given channel.
*
* return DMASUCCESS if no error otherwise return DMACHNERROR
*
* note: Due to the undeterministic parallelism, in chaining
* mode, the value returned by this function shall
* be taken as reference when the query is made rather
* than the absolute snapshot when the value is returned.
**************************************************************/
static DMAStatus DMA_Poke_Curr( LOCATION,
unsigned int eumbbar,
unsigned int channel,
DMA_CURR* desp );
/**************************************************************
* function: DMA_Bld_Desp
*
* description: set current descriptor address register
* according to the desp for a given channel
*
* if the given channel is busy return DMACHNBUSY
* and no change made, otherwise return DMASUCCESS.
*
* note:
**************************************************************/
static DMAStatus DMA_Bld_Desp( LOCATION host,
unsigned int eumbbar,
unsigned int channel,
DMA_CDAR desp );
/**************************************************************
* function: DMA_Poke_Desp
*
* description: poke the current descriptor address register
* for a given channel
*
* return DMASUCCESS if no error otherwise return
* DMAINVALID
*
* note: Due to the undeterministic parallellism of DMA operation,
* the value returned by this function shall be taken as
* the most recently used descriptor when the last time
* DMA starts a chaining mode operation.
**************************************************************/
static DMAStatus DMA_Poke_Desp( LOCATION,
unsigned int eumbbar,
unsigned int channel,
DMA_CDAR *desp );
#endif