u-boot/include/configs/colibri_t20_iris.h
Lucas Stach 6bbda88384 tegra: add Colibri T20 board support
This adds board support for the Toradex Colibri T20 module.

Working functions:
- SD card boot
- USB boot
- Network
- NAND environment

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-29 09:07:04 -07:00

83 lines
2.2 KiB
C

/*
* Copyright (C) 2012 Lucas Stach
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include "tegra20-common.h"
/* Enable FDT support */
#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
#define V_PROMPT "Tegra20 (Colibri) # "
#define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris"
/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_TEGRA_UARTA_SDIO1
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_BOARD_EARLY_INIT_F
/* SD/MMC support */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
/* File system support */
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
/* USB host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_ULPI
#define CONFIG_USB_ULPI_VIEWPORT
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#define CONFIG_CMD_USB
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET (SZ_2M)
#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
#define CONFIG_ENV_SIZE (SZ_64K)
/* Debug commands */
#define CONFIG_CMD_BDI
#define CONFIG_CMD_CACHE
#include "tegra-common-post.h"
#endif /* __CONFIG_H */