Khoronzhuk, Ivan e165b1d34c dma: ti-edma3: introduce edma3 driver ... The EDMA3 controller’s primary purpose is to service data transfers that you program between two memory-mapped slave endpoints on the device. Typical usage includes, but is not limited to the following: - Servicing software-driven paging transfers (e.g., transfers from external memory, such as SDRAM to internal device memory, such as DSP L2 SRAM) - Servicing event-driven peripherals, such as a serial port - Performing sorting or sub-frame extraction of various data structures - Offloading data transfers from the main device DSP(s) - See the device-specific data manual for specific peripherals that are accessible via the EDMA3 controller Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>		2014-10-23 11:27:29 -04:00
..
davinci_nand.h	mtd: nand: davinci: add header file for driver definitions	2014-06-19 17:53:58 -04:00
keystone_nav.h	dma: keystone_nav: generalize driver usage	2014-10-23 11:27:04 -04:00
keystone_net.h	net: keystone_net: register eth PHYs on MDIO bus	2014-10-23 11:27:28 -04:00
keystone_serdes.h	soc: keystone_serdes: generalize to be used by other sub systems	2014-10-23 11:27:28 -04:00
sys_proto.h	armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_context	2014-05-23 19:40:05 -04:00
ti-aemif.h	ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c	2014-06-19 17:53:58 -04:00
ti-edma3.h	dma: ti-edma3: introduce edma3 driver	2014-10-23 11:27:29 -04:00