mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
200 lines
6.2 KiB
C
200 lines
6.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuration settings for the Gumstix Overo board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
|
|
|
#include <configs/ti_omap3_common.h>
|
|
/*
|
|
* We are only ever GP parts and will utilize all of the "downloaded image"
|
|
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
|
|
*/
|
|
#undef CONFIG_SPL_TEXT_BASE
|
|
#define CONFIG_SPL_TEXT_BASE 0x40200000
|
|
|
|
/* call misc_init_r */
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
/* pass the revision tag */
|
|
#define CONFIG_REVISION_TAG
|
|
|
|
/* override size of malloc() pool */
|
|
#undef CONFIG_SYS_MALLOC_LEN
|
|
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
|
|
/* Shift 128 << 15 provides 4 MiB heap to support UBI commands.
|
|
* Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15))
|
|
|
|
/* I2C Support */
|
|
|
|
/* TWL4030 LED */
|
|
#define CONFIG_TWL4030_LED
|
|
|
|
/* USB EHCI */
|
|
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183
|
|
|
|
/* commands to include */
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
|
|
|
|
/* NAND block size is 128 KiB. Synchronize these values with
|
|
* overo_nand_partitions in mach-omap2/board-overo.c in Linux:
|
|
* xloader 4 * NAND_BLOCK_SIZE = 512 KiB
|
|
* uboot 14 * NAND_BLOCK_SIZE = 1792 KiB
|
|
* uboot environtment 2 * NAND_BLOCK_SIZE = 256 KiB
|
|
* linux 64 * NAND_BLOCK_SIZE = 8 MiB
|
|
* rootfs remainder
|
|
*/
|
|
#endif /* CONFIG_NAND */
|
|
|
|
/* Board NAND Info. */
|
|
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
|
|
/* to access nand */
|
|
/* Environment information */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
"bootdir=/boot\0" \
|
|
"bootfile=zImage\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"console=ttyO2,115200n8\0" \
|
|
"mpurate=auto\0" \
|
|
"optargs=\0" \
|
|
"vram=12M\0" \
|
|
"dvimode=1024x768MR-16@60\0" \
|
|
"defaultdisplay=dvi\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 rw\0" \
|
|
"mmcrootfstype=ext4 rootwait\0" \
|
|
"nandroot=ubi0:rootfs ubi.mtd=4\0" \
|
|
"nandrootfstype=ubifs\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"mpurate=${mpurate} " \
|
|
"vram=${vram} " \
|
|
"omapfb.mode=dvi:${dvimode} " \
|
|
"omapdss.def_disp=${defaultdisplay} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"mpurate=${mpurate} " \
|
|
"vram=${vram} " \
|
|
"omapfb.mode=dvi:${dvimode} " \
|
|
"omapdss.def_disp=${defaultdisplay} " \
|
|
"root=${nandroot} " \
|
|
"rootfstype=${nandrootfstype}\0" \
|
|
"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
|
|
"bootscript=echo Running boot script from mmc ...; " \
|
|
"source ${loadaddr}\0" \
|
|
"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
|
|
"importbootenv=echo Importing environment from mmc ...; " \
|
|
"env import -t ${loadaddr} ${filesize}\0" \
|
|
"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
|
|
"mmcboot=echo Booting from mmc...; " \
|
|
"run mmcargs; " \
|
|
"bootm ${loadaddr}\0" \
|
|
"loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
|
|
"loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
|
"loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \
|
|
"loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
|
"mmcbootfdt=echo Booting with DT from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"bootz ${loadaddr} - ${fdtaddr}\0" \
|
|
"nandboot=echo Booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"if nand read ${loadaddr} linux; then " \
|
|
"bootm ${loadaddr};" \
|
|
"fi;\0" \
|
|
"nanddtsboot=echo Booting from nand with DTS...; " \
|
|
"run nandargs; " \
|
|
"ubi part rootfs; "\
|
|
"ubifsmount ubi0:rootfs; "\
|
|
"run loadubifdt; "\
|
|
"run loadubizimage; "\
|
|
"bootz ${loadaddr} - ${fdtaddr}\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"fi;" \
|
|
"if run loadbootenv; then " \
|
|
"echo Loaded environment from ${bootenv};" \
|
|
"run importbootenv;" \
|
|
"fi;" \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"if run loaduimage; then " \
|
|
"run mmcboot;" \
|
|
"fi;" \
|
|
"if run loadzimage; then " \
|
|
"if test -z \"${fdtfile}\"; then " \
|
|
"setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
|
|
"fi;" \
|
|
"if run loadfdt; then " \
|
|
"run mmcbootfdt;" \
|
|
"fi;" \
|
|
"fi;" \
|
|
"fi;" \
|
|
"run nandboot; " \
|
|
"if test -z \"${fdtfile}\"; then "\
|
|
"setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
|
|
"fi;" \
|
|
"run nanddtsboot; " \
|
|
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
|
|
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
|
0x01F00000) /* 31MB */
|
|
|
|
/* FLASH and environment organization */
|
|
#if defined(CONFIG_NAND)
|
|
#define CONFIG_SYS_FLASH_BASE NAND_BASE
|
|
#endif
|
|
|
|
/* Monitor at start of flash */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
|
|
|
|
#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */
|
|
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
|
|
#define CONFIG_ENV_OFFSET 0x240000
|
|
#define CONFIG_ENV_ADDR 0x240000
|
|
|
|
/* Initial RAM setup */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
|
|
|
|
/* NAND boot config */
|
|
#define CONFIG_SYS_NAND_MAX_ECCPOS 56
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
|
|
13, 14, 16, 17, 18, 19, 20, 21, 22, \
|
|
23, 24, 25, 26, 27, 28, 30, 31, 32, \
|
|
33, 34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 44, 45, 46, 47, 48, 49, 50, 51, \
|
|
52, 53, 54, 55, 56}
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 13
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
|
/* NAND: SPL falcon mode configs */
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|