mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
89 lines
3.6 KiB
C
89 lines
3.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuation settings for the Hitachi Solution Engine 7722
|
|
*
|
|
* Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
*/
|
|
|
|
#ifndef __MS7722SE_H
|
|
#define __MS7722SE_H
|
|
|
|
#define CONFIG_CPU_SH7722 1
|
|
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
#undef CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
/* SMC9111 */
|
|
#define CONFIG_SMC91111
|
|
#define CONFIG_SMC91111_BASE (0xB8000000)
|
|
|
|
/* MEMORY */
|
|
#define MS7722SE_SDRAM_BASE (0x8C000000)
|
|
#define MS7722SE_FLASH_BASE_1 (0xA0000000)
|
|
#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024)
|
|
|
|
#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
|
|
|
|
/* SCIF */
|
|
#define CONFIG_CONS_SCIF0 1
|
|
|
|
#define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE)
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
|
|
|
|
#undef CONFIG_SYS_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */
|
|
|
|
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE (MS7722SE_SDRAM_BASE)
|
|
#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
|
|
in Flash (NOT run time address in SDRAM) ?!? */
|
|
#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* */
|
|
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
|
|
|
|
/* FLASH */
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#undef CONFIG_SYS_FLASH_QUIET_TEST
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
|
|
|
#define CONFIG_SYS_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 150 /* Max number of sectors on each
|
|
Flash chip */
|
|
|
|
/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
|
|
CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
|
|
}
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */
|
|
|
|
#undef CONFIG_SYS_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */
|
|
|
|
#undef CONFIG_SYS_DIRECT_FLASH_TFTP
|
|
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
#define CONFIG_ENV_SECT_SIZE (8 * 1024)
|
|
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
|
|
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
|
|
|
|
/* Board Clock */
|
|
#define CONFIG_SYS_CLK_FREQ 33333333
|
|
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
|
|
|
|
#endif /* __MS7722SE_H */
|