mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
50cbff7cf3
This syncs rk3328 device tree files from the Linux kernel next-20200324. The last commit to touch these files is: b2411befed60 ("arm64: dts: add bus to rockchip amba nodenames") Additional changes not yet in the Linux kernel include: arm64: dts: rockchip: rk3328: drop #address-cells, #size-cells from grf node arm64: dts: rockchip: rk3328: drop non-existent gmac2phy pinmux options arm64: dts: rockchip: rk3328: Replace RK805 PMIC node name with "pmic" Changes include: - conversion of raw pin numbers to macros - removal of deprecated RK_FUNC_* macros - update of device tree binding headers - new devices - device tree cleanups - gmac2phy disabled in -u-boot.dtsi as it is not supported in U-boot This includes a re-ordering of the USB device nodes compared to upstream Linux, moving the dwc2 OTG controller after the EHCI/OHCI nodes. This is currently required as otherwise the dwc2 controller would not be able to detect devices in some cases. This may be due to lack of USB PHY support in U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org>
1904 lines
46 KiB
Text
1904 lines
46 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <dt-bindings/clock/rk3328-cru.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/power/rk3328-power.h>
|
|
#include <dt-bindings/soc/rockchip,boot-mode.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
/ {
|
|
compatible = "rockchip,rk3328";
|
|
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
i2c3 = &i2c3;
|
|
ethernet0 = &gmac2io;
|
|
ethernet1 = &gmac2phy;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0 0x0>;
|
|
clocks = <&cru ARMCLK>;
|
|
#cooling-cells = <2>;
|
|
cpu-idle-states = <&CPU_SLEEP>;
|
|
dynamic-power-coefficient = <120>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0 0x1>;
|
|
clocks = <&cru ARMCLK>;
|
|
#cooling-cells = <2>;
|
|
cpu-idle-states = <&CPU_SLEEP>;
|
|
dynamic-power-coefficient = <120>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0 0x2>;
|
|
clocks = <&cru ARMCLK>;
|
|
#cooling-cells = <2>;
|
|
cpu-idle-states = <&CPU_SLEEP>;
|
|
dynamic-power-coefficient = <120>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0 0x3>;
|
|
clocks = <&cru ARMCLK>;
|
|
#cooling-cells = <2>;
|
|
cpu-idle-states = <&CPU_SLEEP>;
|
|
dynamic-power-coefficient = <120>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
};
|
|
|
|
idle-states {
|
|
entry-method = "psci";
|
|
|
|
CPU_SLEEP: cpu-sleep {
|
|
compatible = "arm,idle-state";
|
|
local-timer-stop;
|
|
arm,psci-suspend-param = <0x0010000>;
|
|
entry-latency-us = <120>;
|
|
exit-latency-us = <250>;
|
|
min-residency-us = <900>;
|
|
};
|
|
};
|
|
|
|
l2: l2-cache0 {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
cpu0_opp_table: opp_table0 {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
|
|
opp-408000000 {
|
|
opp-hz = /bits/ 64 <408000000>;
|
|
opp-microvolt = <950000>;
|
|
clock-latency-ns = <40000>;
|
|
opp-suspend;
|
|
};
|
|
opp-600000000 {
|
|
opp-hz = /bits/ 64 <600000000>;
|
|
opp-microvolt = <950000>;
|
|
clock-latency-ns = <40000>;
|
|
};
|
|
opp-816000000 {
|
|
opp-hz = /bits/ 64 <816000000>;
|
|
opp-microvolt = <1000000>;
|
|
clock-latency-ns = <40000>;
|
|
};
|
|
opp-1008000000 {
|
|
opp-hz = /bits/ 64 <1008000000>;
|
|
opp-microvolt = <1100000>;
|
|
clock-latency-ns = <40000>;
|
|
};
|
|
opp-1200000000 {
|
|
opp-hz = /bits/ 64 <1200000000>;
|
|
opp-microvolt = <1225000>;
|
|
clock-latency-ns = <40000>;
|
|
};
|
|
opp-1296000000 {
|
|
opp-hz = /bits/ 64 <1296000000>;
|
|
opp-microvolt = <1300000>;
|
|
clock-latency-ns = <40000>;
|
|
};
|
|
};
|
|
|
|
amba: bus {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
dmac: dmac@ff1f0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x0 0xff1f0000 0x0 0x4000>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru ACLK_DMAC>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
};
|
|
|
|
analog_sound: analog-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,name = "Analog";
|
|
status = "disabled";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s1>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&codec>;
|
|
};
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a53-pmu";
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
};
|
|
|
|
display_subsystem: display-subsystem {
|
|
compatible = "rockchip,display-subsystem";
|
|
ports = <&vop_out>;
|
|
};
|
|
|
|
hdmi_sound: hdmi-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <128>;
|
|
simple-audio-card,name = "HDMI";
|
|
status = "disabled";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s0>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&hdmi>;
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0", "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
xin24m: xin24m {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "xin24m";
|
|
};
|
|
|
|
i2s0: i2s@ff000000 {
|
|
compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
|
|
reg = <0x0 0xff000000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
|
|
clock-names = "i2s_clk", "i2s_hclk";
|
|
dmas = <&dmac 11>, <&dmac 12>;
|
|
dma-names = "tx", "rx";
|
|
#sound-dai-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s1: i2s@ff010000 {
|
|
compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
|
|
reg = <0x0 0xff010000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
|
|
clock-names = "i2s_clk", "i2s_hclk";
|
|
dmas = <&dmac 14>, <&dmac 15>;
|
|
dma-names = "tx", "rx";
|
|
#sound-dai-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: i2s@ff020000 {
|
|
compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
|
|
reg = <0x0 0xff020000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
|
|
clock-names = "i2s_clk", "i2s_hclk";
|
|
dmas = <&dmac 0>, <&dmac 1>;
|
|
dma-names = "tx", "rx";
|
|
#sound-dai-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spdif: spdif@ff030000 {
|
|
compatible = "rockchip,rk3328-spdif";
|
|
reg = <0x0 0xff030000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
|
|
clock-names = "mclk", "hclk";
|
|
dmas = <&dmac 10>;
|
|
dma-names = "tx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spdifm2_tx>;
|
|
#sound-dai-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pdm: pdm@ff040000 {
|
|
compatible = "rockchip,pdm";
|
|
reg = <0x0 0xff040000 0x0 0x1000>;
|
|
clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
|
|
clock-names = "pdm_clk", "pdm_hclk";
|
|
dmas = <&dmac 16>;
|
|
dma-names = "rx";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&pdmm0_clk
|
|
&pdmm0_sdi0
|
|
&pdmm0_sdi1
|
|
&pdmm0_sdi2
|
|
&pdmm0_sdi3>;
|
|
pinctrl-1 = <&pdmm0_clk_sleep
|
|
&pdmm0_sdi0_sleep
|
|
&pdmm0_sdi1_sleep
|
|
&pdmm0_sdi2_sleep
|
|
&pdmm0_sdi3_sleep>;
|
|
status = "disabled";
|
|
};
|
|
|
|
grf: syscon@ff100000 {
|
|
compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
|
|
reg = <0x0 0xff100000 0x0 0x1000>;
|
|
|
|
io_domains: io-domains {
|
|
compatible = "rockchip,rk3328-io-voltage-domain";
|
|
status = "disabled";
|
|
};
|
|
|
|
grf_gpio: grf-gpio {
|
|
compatible = "rockchip,rk3328-grf-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
power: power-controller {
|
|
compatible = "rockchip,rk3328-power-controller";
|
|
#power-domain-cells = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pd_hevc@RK3328_PD_HEVC {
|
|
reg = <RK3328_PD_HEVC>;
|
|
};
|
|
pd_video@RK3328_PD_VIDEO {
|
|
reg = <RK3328_PD_VIDEO>;
|
|
};
|
|
pd_vpu@RK3328_PD_VPU {
|
|
reg = <RK3328_PD_VPU>;
|
|
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
|
|
};
|
|
};
|
|
|
|
reboot-mode {
|
|
compatible = "syscon-reboot-mode";
|
|
offset = <0x5c8>;
|
|
mode-normal = <BOOT_NORMAL>;
|
|
mode-recovery = <BOOT_RECOVERY>;
|
|
mode-bootloader = <BOOT_FASTBOOT>;
|
|
mode-loader = <BOOT_BL_DOWNLOAD>;
|
|
};
|
|
};
|
|
|
|
uart0: serial@ff110000 {
|
|
compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
|
|
reg = <0x0 0xff110000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
dmas = <&dmac 2>, <&dmac 3>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@ff120000 {
|
|
compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
|
|
reg = <0x0 0xff120000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
dmas = <&dmac 4>, <&dmac 5>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@ff130000 {
|
|
compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
|
|
reg = <0x0 0xff130000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
dmas = <&dmac 6>, <&dmac 7>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2m1_xfer>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@ff150000 {
|
|
compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
|
|
reg = <0x0 0xff150000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
|
|
clock-names = "i2c", "pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_xfer>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@ff160000 {
|
|
compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
|
|
reg = <0x0 0xff160000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
|
|
clock-names = "i2c", "pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_xfer>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@ff170000 {
|
|
compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
|
|
reg = <0x0 0xff170000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
|
|
clock-names = "i2c", "pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_xfer>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@ff180000 {
|
|
compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
|
|
reg = <0x0 0xff180000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
|
|
clock-names = "i2c", "pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_xfer>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@ff190000 {
|
|
compatible = "rockchip,rk3328-spi", "rockchip,rk3066-spi";
|
|
reg = <0x0 0xff190000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
|
|
clock-names = "spiclk", "apb_pclk";
|
|
dmas = <&dmac 8>, <&dmac 9>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0m2_clk &spi0m2_tx &spi0m2_rx &spi0m2_cs0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt: watchdog@ff1a0000 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0x0 0xff1a0000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_WDT>;
|
|
};
|
|
|
|
pwm0: pwm@ff1b0000 {
|
|
compatible = "rockchip,rk3328-pwm";
|
|
reg = <0x0 0xff1b0000 0x0 0x10>;
|
|
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
|
|
clock-names = "pwm", "pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm0_pin>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@ff1b0010 {
|
|
compatible = "rockchip,rk3328-pwm";
|
|
reg = <0x0 0xff1b0010 0x0 0x10>;
|
|
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
|
|
clock-names = "pwm", "pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm1_pin>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@ff1b0020 {
|
|
compatible = "rockchip,rk3328-pwm";
|
|
reg = <0x0 0xff1b0020 0x0 0x10>;
|
|
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
|
|
clock-names = "pwm", "pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm2_pin>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@ff1b0030 {
|
|
compatible = "rockchip,rk3328-pwm";
|
|
reg = <0x0 0xff1b0030 0x0 0x10>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
|
|
clock-names = "pwm", "pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwmir_pin>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
thermal-zones {
|
|
soc_thermal: soc-thermal {
|
|
polling-delay-passive = <20>;
|
|
polling-delay = <1000>;
|
|
sustainable-power = <1000>;
|
|
|
|
thermal-sensors = <&tsadc 0>;
|
|
|
|
trips {
|
|
threshold: trip-point0 {
|
|
temperature = <70000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
target: trip-point1 {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
soc_crit: soc-crit {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&target>;
|
|
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
contribution = <4096>;
|
|
};
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
tsadc: tsadc@ff250000 {
|
|
compatible = "rockchip,rk3328-tsadc";
|
|
reg = <0x0 0xff250000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
|
|
assigned-clocks = <&cru SCLK_TSADC>;
|
|
assigned-clock-rates = <50000>;
|
|
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
|
|
clock-names = "tsadc", "apb_pclk";
|
|
pinctrl-names = "init", "default", "sleep";
|
|
pinctrl-0 = <&otp_gpio>;
|
|
pinctrl-1 = <&otp_out>;
|
|
pinctrl-2 = <&otp_gpio>;
|
|
resets = <&cru SRST_TSADC>;
|
|
reset-names = "tsadc-apb";
|
|
rockchip,grf = <&grf>;
|
|
rockchip,hw-tshut-temp = <100000>;
|
|
#thermal-sensor-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
efuse: efuse@ff260000 {
|
|
compatible = "rockchip,rk3328-efuse";
|
|
reg = <0x0 0xff260000 0x0 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&cru SCLK_EFUSE>;
|
|
clock-names = "pclk_efuse";
|
|
rockchip,efuse-size = <0x20>;
|
|
|
|
/* Data cells */
|
|
efuse_id: id@7 {
|
|
reg = <0x07 0x10>;
|
|
};
|
|
cpu_leakage: cpu-leakage@17 {
|
|
reg = <0x17 0x1>;
|
|
};
|
|
logic_leakage: logic-leakage@19 {
|
|
reg = <0x19 0x1>;
|
|
};
|
|
efuse_cpu_version: cpu-version@1a {
|
|
reg = <0x1a 0x1>;
|
|
bits = <3 3>;
|
|
};
|
|
};
|
|
|
|
saradc: adc@ff280000 {
|
|
compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc";
|
|
reg = <0x0 0xff280000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
#io-channel-cells = <1>;
|
|
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
|
|
clock-names = "saradc", "apb_pclk";
|
|
resets = <&cru SRST_SARADC_P>;
|
|
reset-names = "saradc-apb";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpu: gpu@ff300000 {
|
|
compatible = "rockchip,rk3328-mali", "arm,mali-450";
|
|
reg = <0x0 0xff300000 0x0 0x40000>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "gp",
|
|
"gpmmu",
|
|
"pp",
|
|
"pp0",
|
|
"ppmmu0",
|
|
"pp1",
|
|
"ppmmu1";
|
|
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
|
|
clock-names = "bus", "core";
|
|
resets = <&cru SRST_GPU_A>;
|
|
};
|
|
|
|
h265e_mmu: iommu@ff330200 {
|
|
compatible = "rockchip,iommu";
|
|
reg = <0x0 0xff330200 0 0x100>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "h265e_mmu";
|
|
clocks = <&cru ACLK_H265>, <&cru PCLK_H265>;
|
|
clock-names = "aclk", "iface";
|
|
#iommu-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vepu_mmu: iommu@ff340800 {
|
|
compatible = "rockchip,iommu";
|
|
reg = <0x0 0xff340800 0x0 0x40>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "vepu_mmu";
|
|
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
|
|
clock-names = "aclk", "iface";
|
|
#iommu-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vpu: video-codec@ff350000 {
|
|
compatible = "rockchip,rk3328-vpu";
|
|
reg = <0x0 0xff350000 0x0 0x800>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "vdpu";
|
|
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
|
|
clock-names = "aclk", "hclk";
|
|
iommus = <&vpu_mmu>;
|
|
power-domains = <&power RK3328_PD_VPU>;
|
|
};
|
|
|
|
vpu_mmu: iommu@ff350800 {
|
|
compatible = "rockchip,iommu";
|
|
reg = <0x0 0xff350800 0x0 0x40>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "vpu_mmu";
|
|
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
|
|
clock-names = "aclk", "iface";
|
|
#iommu-cells = <0>;
|
|
power-domains = <&power RK3328_PD_VPU>;
|
|
};
|
|
|
|
rkvdec_mmu: iommu@ff360480 {
|
|
compatible = "rockchip,iommu";
|
|
reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "rkvdec_mmu";
|
|
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
|
|
clock-names = "aclk", "iface";
|
|
#iommu-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vop: vop@ff370000 {
|
|
compatible = "rockchip,rk3328-vop";
|
|
reg = <0x0 0xff370000 0x0 0x3efc>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
|
|
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
|
|
resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
|
|
reset-names = "axi", "ahb", "dclk";
|
|
iommus = <&vop_mmu>;
|
|
status = "disabled";
|
|
|
|
vop_out: port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
vop_out_hdmi: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&hdmi_in_vop>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vop_mmu: iommu@ff373f00 {
|
|
compatible = "rockchip,iommu";
|
|
reg = <0x0 0xff373f00 0x0 0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "vop_mmu";
|
|
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
|
|
clock-names = "aclk", "iface";
|
|
#iommu-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmi: hdmi@ff3c0000 {
|
|
compatible = "rockchip,rk3328-dw-hdmi";
|
|
reg = <0x0 0xff3c0000 0x0 0x20000>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_HDMI>,
|
|
<&cru SCLK_HDMI_SFC>,
|
|
<&cru SCLK_RTC32K>;
|
|
clock-names = "iahb",
|
|
"isfr",
|
|
"cec";
|
|
phys = <&hdmiphy>;
|
|
phy-names = "hdmi";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
|
|
rockchip,grf = <&grf>;
|
|
#sound-dai-cells = <0>;
|
|
status = "disabled";
|
|
|
|
ports {
|
|
hdmi_in: port {
|
|
hdmi_in_vop: endpoint {
|
|
remote-endpoint = <&vop_out_hdmi>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
codec: codec@ff410000 {
|
|
compatible = "rockchip,rk3328-codec";
|
|
reg = <0x0 0xff410000 0x0 0x1000>;
|
|
clocks = <&cru PCLK_ACODECPHY>, <&cru SCLK_I2S1>;
|
|
clock-names = "pclk", "mclk";
|
|
rockchip,grf = <&grf>;
|
|
#sound-dai-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmiphy: phy@ff430000 {
|
|
compatible = "rockchip,rk3328-hdmi-phy";
|
|
reg = <0x0 0xff430000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
|
|
clock-names = "sysclk", "refoclk", "refpclk";
|
|
clock-output-names = "hdmi_phy";
|
|
#clock-cells = <0>;
|
|
nvmem-cells = <&efuse_cpu_version>;
|
|
nvmem-cell-names = "cpu-version";
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cru: clock-controller@ff440000 {
|
|
compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
|
|
reg = <0x0 0xff440000 0x0 0x1000>;
|
|
rockchip,grf = <&grf>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
assigned-clocks =
|
|
/*
|
|
* CPLL should run at 1200, but that is to high for
|
|
* the initial dividers of most of its children.
|
|
* We need set cpll child clk div first,
|
|
* and then set the cpll frequency.
|
|
*/
|
|
<&cru DCLK_LCDC>, <&cru SCLK_PDM>,
|
|
<&cru SCLK_RTC32K>, <&cru SCLK_UART0>,
|
|
<&cru SCLK_UART1>, <&cru SCLK_UART2>,
|
|
<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
|
|
<&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>,
|
|
<&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
|
|
<&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
|
|
<&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
|
|
<&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
|
|
<&cru SCLK_SDIO>, <&cru SCLK_TSP>,
|
|
<&cru SCLK_WIFI>, <&cru ARMCLK>,
|
|
<&cru PLL_GPLL>, <&cru PLL_CPLL>,
|
|
<&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>,
|
|
<&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
|
|
<&cru HCLK_PERI>, <&cru PCLK_PERI>,
|
|
<&cru SCLK_RTC32K>;
|
|
assigned-clock-parents =
|
|
<&cru HDMIPHY>, <&cru PLL_APLL>,
|
|
<&cru PLL_GPLL>, <&xin24m>,
|
|
<&xin24m>, <&xin24m>;
|
|
assigned-clock-rates =
|
|
<0>, <61440000>,
|
|
<0>, <24000000>,
|
|
<24000000>, <24000000>,
|
|
<15000000>, <15000000>,
|
|
<100000000>, <100000000>,
|
|
<100000000>, <100000000>,
|
|
<50000000>, <100000000>,
|
|
<100000000>, <100000000>,
|
|
<50000000>, <50000000>,
|
|
<50000000>, <50000000>,
|
|
<24000000>, <600000000>,
|
|
<491520000>, <1200000000>,
|
|
<150000000>, <75000000>,
|
|
<75000000>, <150000000>,
|
|
<75000000>, <75000000>,
|
|
<32768>;
|
|
};
|
|
|
|
usb2phy_grf: syscon@ff450000 {
|
|
compatible = "rockchip,rk3328-usb2phy-grf", "syscon",
|
|
"simple-mfd";
|
|
reg = <0x0 0xff450000 0x0 0x10000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
u2phy: usb2-phy@100 {
|
|
compatible = "rockchip,rk3328-usb2phy";
|
|
reg = <0x100 0x10>;
|
|
clocks = <&xin24m>;
|
|
clock-names = "phyclk";
|
|
clock-output-names = "usb480m_phy";
|
|
#clock-cells = <0>;
|
|
assigned-clocks = <&cru USB480M>;
|
|
assigned-clock-parents = <&u2phy>;
|
|
status = "disabled";
|
|
|
|
u2phy_otg: otg-port {
|
|
#phy-cells = <0>;
|
|
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "otg-bvalid", "otg-id",
|
|
"linestate";
|
|
status = "disabled";
|
|
};
|
|
|
|
u2phy_host: host-port {
|
|
#phy-cells = <0>;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "linestate";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
sdmmc: mmc@ff500000 {
|
|
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
|
|
reg = <0x0 0xff500000 0x0 0x4000>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
|
|
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
|
fifo-depth = <0x100>;
|
|
max-frequency = <150000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdio: mmc@ff510000 {
|
|
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
|
|
reg = <0x0 0xff510000 0x0 0x4000>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
|
|
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
|
fifo-depth = <0x100>;
|
|
max-frequency = <150000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
emmc: mmc@ff520000 {
|
|
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
|
|
reg = <0x0 0xff520000 0x0 0x4000>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
|
|
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
|
fifo-depth = <0x100>;
|
|
max-frequency = <150000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac2io: ethernet@ff540000 {
|
|
compatible = "rockchip,rk3328-gmac";
|
|
reg = <0x0 0xff540000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_RX>,
|
|
<&cru SCLK_MAC2IO_TX>, <&cru SCLK_MAC2IO_REF>,
|
|
<&cru SCLK_MAC2IO_REFOUT>, <&cru ACLK_MAC2IO>,
|
|
<&cru PCLK_MAC2IO>;
|
|
clock-names = "stmmaceth", "mac_clk_rx",
|
|
"mac_clk_tx", "clk_mac_ref",
|
|
"clk_mac_refout", "aclk_mac",
|
|
"pclk_mac";
|
|
resets = <&cru SRST_GMAC2IO_A>;
|
|
reset-names = "stmmaceth";
|
|
rockchip,grf = <&grf>;
|
|
snps,txpbl = <0x4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac2phy: ethernet@ff550000 {
|
|
compatible = "rockchip,rk3328-gmac";
|
|
reg = <0x0 0xff550000 0x0 0x10000>;
|
|
rockchip,grf = <&grf>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
clocks = <&cru SCLK_MAC2PHY_SRC>, <&cru SCLK_MAC2PHY_RXTX>,
|
|
<&cru SCLK_MAC2PHY_RXTX>, <&cru SCLK_MAC2PHY_REF>,
|
|
<&cru ACLK_MAC2PHY>, <&cru PCLK_MAC2PHY>,
|
|
<&cru SCLK_MAC2PHY_OUT>;
|
|
clock-names = "stmmaceth", "mac_clk_rx",
|
|
"mac_clk_tx", "clk_mac_ref",
|
|
"aclk_mac", "pclk_mac",
|
|
"clk_macphy";
|
|
resets = <&cru SRST_GMAC2PHY_A>, <&cru SRST_MACPHY>;
|
|
reset-names = "stmmaceth", "mac-phy";
|
|
phy-mode = "rmii";
|
|
phy-handle = <&phy>;
|
|
snps,txpbl = <0x4>;
|
|
status = "disabled";
|
|
|
|
mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy: phy@0 {
|
|
compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
clocks = <&cru SCLK_MAC2PHY_OUT>;
|
|
resets = <&cru SRST_MACPHY>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fephyled_rxm1 &fephyled_linkm1>;
|
|
phy-is-integrated;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_host0_ehci: usb@ff5c0000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x0 0xff5c0000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_HOST0>, <&u2phy>;
|
|
phys = <&u2phy_host>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_host0_ohci: usb@ff5d0000 {
|
|
compatible = "generic-ohci";
|
|
reg = <0x0 0xff5d0000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_HOST0>, <&u2phy>;
|
|
phys = <&u2phy_host>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
/*
|
|
* U-boot Specific Change
|
|
*
|
|
* The OTG controller must come after the USB host pair for it
|
|
* to work. This is likely due to lack of support for the USB
|
|
* PHYs. This must be manually changed after each device tree
|
|
* sync. There is no clean way to handle this in -u-boot.dtsi
|
|
* files.
|
|
*/
|
|
usb20_otg: usb@ff580000 {
|
|
compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
|
|
"snps,dwc2";
|
|
reg = <0x0 0xff580000 0x0 0x40000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG>;
|
|
clock-names = "otg";
|
|
dr_mode = "otg";
|
|
g-np-tx-fifo-size = <16>;
|
|
g-rx-fifo-size = <280>;
|
|
g-tx-fifo-size = <256 128 128 64 32 16>;
|
|
phys = <&u2phy_otg>;
|
|
phy-names = "usb2-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@ff811000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0x0 0xff811000 0 0x1000>,
|
|
<0x0 0xff812000 0 0x2000>,
|
|
<0x0 0xff814000 0 0x2000>,
|
|
<0x0 0xff816000 0 0x2000>;
|
|
interrupts = <GIC_PPI 9
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "rockchip,rk3328-pinctrl";
|
|
rockchip,grf = <&grf>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
gpio0: gpio0@ff210000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x0 0xff210000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO0>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio1: gpio1@ff220000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x0 0xff220000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO1>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio2@ff230000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x0 0xff230000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO2>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio3@ff240000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x0 0xff240000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO3>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pcfg_pull_up: pcfg-pull-up {
|
|
bias-pull-up;
|
|
};
|
|
|
|
pcfg_pull_down: pcfg-pull-down {
|
|
bias-pull-down;
|
|
};
|
|
|
|
pcfg_pull_none: pcfg-pull-none {
|
|
bias-disable;
|
|
};
|
|
|
|
pcfg_pull_none_2ma: pcfg-pull-none-2ma {
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
pcfg_pull_up_2ma: pcfg-pull-up-2ma {
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
pcfg_pull_up_4ma: pcfg-pull-up-4ma {
|
|
bias-pull-up;
|
|
drive-strength = <4>;
|
|
};
|
|
|
|
pcfg_pull_none_4ma: pcfg-pull-none-4ma {
|
|
bias-disable;
|
|
drive-strength = <4>;
|
|
};
|
|
|
|
pcfg_pull_down_4ma: pcfg-pull-down-4ma {
|
|
bias-pull-down;
|
|
drive-strength = <4>;
|
|
};
|
|
|
|
pcfg_pull_none_8ma: pcfg-pull-none-8ma {
|
|
bias-disable;
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
pcfg_pull_up_8ma: pcfg-pull-up-8ma {
|
|
bias-pull-up;
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
pcfg_pull_none_12ma: pcfg-pull-none-12ma {
|
|
bias-disable;
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
pcfg_pull_up_12ma: pcfg-pull-up-12ma {
|
|
bias-pull-up;
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
pcfg_output_high: pcfg-output-high {
|
|
output-high;
|
|
};
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
pcfg_input_high: pcfg-input-high {
|
|
bias-pull-up;
|
|
input-enable;
|
|
};
|
|
|
|
pcfg_input: pcfg-input {
|
|
input-enable;
|
|
};
|
|
|
|
i2c0 {
|
|
i2c0_xfer: i2c0-xfer {
|
|
rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>,
|
|
<2 RK_PD1 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c1 {
|
|
i2c1_xfer: i2c1-xfer {
|
|
rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>,
|
|
<2 RK_PA5 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c2 {
|
|
i2c2_xfer: i2c2-xfer {
|
|
rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>,
|
|
<2 RK_PB6 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c3 {
|
|
i2c3_xfer: i2c3-xfer {
|
|
rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
|
|
<0 RK_PA6 2 &pcfg_pull_none>;
|
|
};
|
|
i2c3_gpio: i2c3-gpio {
|
|
rockchip,pins =
|
|
<0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
|
|
<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hdmi_i2c {
|
|
hdmii2c_xfer: hdmii2c-xfer {
|
|
rockchip,pins = <0 RK_PA5 1 &pcfg_pull_none>,
|
|
<0 RK_PA6 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pdm-0 {
|
|
pdmm0_clk: pdmm0-clk {
|
|
rockchip,pins = <2 RK_PC2 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
pdmm0_fsync: pdmm0-fsync {
|
|
rockchip,pins = <2 RK_PC7 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
pdmm0_sdi0: pdmm0-sdi0 {
|
|
rockchip,pins = <2 RK_PC3 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
pdmm0_sdi1: pdmm0-sdi1 {
|
|
rockchip,pins = <2 RK_PC4 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
pdmm0_sdi2: pdmm0-sdi2 {
|
|
rockchip,pins = <2 RK_PC5 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
pdmm0_sdi3: pdmm0-sdi3 {
|
|
rockchip,pins = <2 RK_PC6 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
pdmm0_clk_sleep: pdmm0-clk-sleep {
|
|
rockchip,pins =
|
|
<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
|
|
pdmm0_sdi0_sleep: pdmm0-sdi0-sleep {
|
|
rockchip,pins =
|
|
<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
|
|
pdmm0_sdi1_sleep: pdmm0-sdi1-sleep {
|
|
rockchip,pins =
|
|
<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
|
|
pdmm0_sdi2_sleep: pdmm0-sdi2-sleep {
|
|
rockchip,pins =
|
|
<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
|
|
pdmm0_sdi3_sleep: pdmm0-sdi3-sleep {
|
|
rockchip,pins =
|
|
<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
|
|
pdmm0_fsync_sleep: pdmm0-fsync-sleep {
|
|
rockchip,pins =
|
|
<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
};
|
|
|
|
tsadc {
|
|
otp_gpio: otp-gpio {
|
|
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
otp_out: otp-out {
|
|
rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart0 {
|
|
uart0_xfer: uart0-xfer {
|
|
rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>,
|
|
<1 RK_PB0 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_cts: uart0-cts {
|
|
rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_rts: uart0-rts {
|
|
rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_rts_gpio: uart0-rts-gpio {
|
|
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart1 {
|
|
uart1_xfer: uart1-xfer {
|
|
rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>,
|
|
<3 RK_PA6 4 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart1_cts: uart1-cts {
|
|
rockchip,pins = <3 RK_PA7 4 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart1_rts: uart1-rts {
|
|
rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart1_rts_gpio: uart1-rts-gpio {
|
|
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart2-0 {
|
|
uart2m0_xfer: uart2m0-xfer {
|
|
rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>,
|
|
<1 RK_PA1 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart2-1 {
|
|
uart2m1_xfer: uart2m1-xfer {
|
|
rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>,
|
|
<2 RK_PA1 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
spi0-0 {
|
|
spi0m0_clk: spi0m0-clk {
|
|
rockchip,pins = <2 RK_PB0 1 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m0_cs0: spi0m0-cs0 {
|
|
rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m0_tx: spi0m0-tx {
|
|
rockchip,pins = <2 RK_PB1 1 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m0_rx: spi0m0-rx {
|
|
rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m0_cs1: spi0m0-cs1 {
|
|
rockchip,pins = <2 RK_PB4 1 &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
spi0-1 {
|
|
spi0m1_clk: spi0m1-clk {
|
|
rockchip,pins = <3 RK_PC7 2 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m1_cs0: spi0m1-cs0 {
|
|
rockchip,pins = <3 RK_PD2 2 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m1_tx: spi0m1-tx {
|
|
rockchip,pins = <3 RK_PD1 2 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m1_rx: spi0m1-rx {
|
|
rockchip,pins = <3 RK_PD0 2 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m1_cs1: spi0m1-cs1 {
|
|
rockchip,pins = <3 RK_PD3 2 &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
spi0-2 {
|
|
spi0m2_clk: spi0m2-clk {
|
|
rockchip,pins = <3 RK_PA0 4 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m2_cs0: spi0m2-cs0 {
|
|
rockchip,pins = <3 RK_PB0 3 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m2_tx: spi0m2-tx {
|
|
rockchip,pins = <3 RK_PA1 4 &pcfg_pull_up>;
|
|
};
|
|
|
|
spi0m2_rx: spi0m2-rx {
|
|
rockchip,pins = <3 RK_PA2 4 &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
i2s1 {
|
|
i2s1_mclk: i2s1-mclk {
|
|
rockchip,pins = <2 RK_PB7 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_sclk: i2s1-sclk {
|
|
rockchip,pins = <2 RK_PC2 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_lrckrx: i2s1-lrckrx {
|
|
rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_lrcktx: i2s1-lrcktx {
|
|
rockchip,pins = <2 RK_PC1 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_sdi: i2s1-sdi {
|
|
rockchip,pins = <2 RK_PC3 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_sdo: i2s1-sdo {
|
|
rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_sdio1: i2s1-sdio1 {
|
|
rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_sdio2: i2s1-sdio2 {
|
|
rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_sdio3: i2s1-sdio3 {
|
|
rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s1_sleep: i2s1-sleep {
|
|
rockchip,pins =
|
|
<2 RK_PB7 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<2 RK_PC0 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<2 RK_PC1 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
};
|
|
|
|
i2s2-0 {
|
|
i2s2m0_mclk: i2s2m0-mclk {
|
|
rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m0_sclk: i2s2m0-sclk {
|
|
rockchip,pins = <1 RK_PC6 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m0_lrckrx: i2s2m0-lrckrx {
|
|
rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m0_lrcktx: i2s2m0-lrcktx {
|
|
rockchip,pins = <1 RK_PC7 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m0_sdi: i2s2m0-sdi {
|
|
rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m0_sdo: i2s2m0-sdo {
|
|
rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m0_sleep: i2s2m0-sleep {
|
|
rockchip,pins =
|
|
<1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<1 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<1 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<1 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<1 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<1 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
};
|
|
|
|
i2s2-1 {
|
|
i2s2m1_mclk: i2s2m1-mclk {
|
|
rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m1_sclk: i2s2m1-sclk {
|
|
rockchip,pins = <3 RK_PA0 6 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m1_lrckrx: i2sm1-lrckrx {
|
|
rockchip,pins = <3 RK_PB0 6 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m1_lrcktx: i2s2m1-lrcktx {
|
|
rockchip,pins = <3 RK_PB0 4 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m1_sdi: i2s2m1-sdi {
|
|
rockchip,pins = <3 RK_PA2 6 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m1_sdo: i2s2m1-sdo {
|
|
rockchip,pins = <3 RK_PA1 6 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2s2m1_sleep: i2s2m1-sleep {
|
|
rockchip,pins =
|
|
<1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<3 RK_PA0 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<3 RK_PB0 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<3 RK_PA2 RK_FUNC_GPIO &pcfg_input_high>,
|
|
<3 RK_PA1 RK_FUNC_GPIO &pcfg_input_high>;
|
|
};
|
|
};
|
|
|
|
spdif-0 {
|
|
spdifm0_tx: spdifm0-tx {
|
|
rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
spdif-1 {
|
|
spdifm1_tx: spdifm1-tx {
|
|
rockchip,pins = <2 RK_PC1 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
spdif-2 {
|
|
spdifm2_tx: spdifm2-tx {
|
|
rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdmmc0-0 {
|
|
sdmmc0m0_pwren: sdmmc0m0-pwren {
|
|
rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0m0_gpio: sdmmc0m0-gpio {
|
|
rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
|
|
};
|
|
};
|
|
|
|
sdmmc0-1 {
|
|
sdmmc0m1_pwren: sdmmc0m1-pwren {
|
|
rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0m1_gpio: sdmmc0m1-gpio {
|
|
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
|
|
};
|
|
};
|
|
|
|
sdmmc0 {
|
|
sdmmc0_clk: sdmmc0-clk {
|
|
rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_8ma>;
|
|
};
|
|
|
|
sdmmc0_cmd: sdmmc0-cmd {
|
|
rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc0_dectn: sdmmc0-dectn {
|
|
rockchip,pins = <1 RK_PA5 1 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0_wrprt: sdmmc0-wrprt {
|
|
rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0_bus1: sdmmc0-bus1 {
|
|
rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc0_bus4: sdmmc0-bus4 {
|
|
rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>,
|
|
<1 RK_PA1 1 &pcfg_pull_up_8ma>,
|
|
<1 RK_PA2 1 &pcfg_pull_up_8ma>,
|
|
<1 RK_PA3 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc0_gpio: sdmmc0-gpio {
|
|
rockchip,pins =
|
|
<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
|
|
};
|
|
};
|
|
|
|
sdmmc0ext {
|
|
sdmmc0ext_clk: sdmmc0ext-clk {
|
|
rockchip,pins = <3 RK_PA2 3 &pcfg_pull_none_4ma>;
|
|
};
|
|
|
|
sdmmc0ext_cmd: sdmmc0ext-cmd {
|
|
rockchip,pins = <3 RK_PA0 3 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0ext_wrprt: sdmmc0ext-wrprt {
|
|
rockchip,pins = <3 RK_PA3 3 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0ext_dectn: sdmmc0ext-dectn {
|
|
rockchip,pins = <3 RK_PA1 3 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0ext_bus1: sdmmc0ext-bus1 {
|
|
rockchip,pins = <3 RK_PA4 3 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0ext_bus4: sdmmc0ext-bus4 {
|
|
rockchip,pins =
|
|
<3 RK_PA4 3 &pcfg_pull_up_4ma>,
|
|
<3 RK_PA5 3 &pcfg_pull_up_4ma>,
|
|
<3 RK_PA6 3 &pcfg_pull_up_4ma>,
|
|
<3 RK_PA7 3 &pcfg_pull_up_4ma>;
|
|
};
|
|
|
|
sdmmc0ext_gpio: sdmmc0ext-gpio {
|
|
rockchip,pins =
|
|
<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
|
|
};
|
|
};
|
|
|
|
sdmmc1 {
|
|
sdmmc1_clk: sdmmc1-clk {
|
|
rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none_8ma>;
|
|
};
|
|
|
|
sdmmc1_cmd: sdmmc1-cmd {
|
|
rockchip,pins = <1 RK_PB5 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc1_pwren: sdmmc1-pwren {
|
|
rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc1_wrprt: sdmmc1-wrprt {
|
|
rockchip,pins = <1 RK_PC4 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc1_dectn: sdmmc1-dectn {
|
|
rockchip,pins = <1 RK_PC3 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc1_bus1: sdmmc1-bus1 {
|
|
rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc1_bus4: sdmmc1-bus4 {
|
|
rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>,
|
|
<1 RK_PB7 1 &pcfg_pull_up_8ma>,
|
|
<1 RK_PC0 1 &pcfg_pull_up_8ma>,
|
|
<1 RK_PC1 1 &pcfg_pull_up_8ma>;
|
|
};
|
|
|
|
sdmmc1_gpio: sdmmc1-gpio {
|
|
rockchip,pins =
|
|
<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
|
|
<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
|
|
};
|
|
};
|
|
|
|
emmc {
|
|
emmc_clk: emmc-clk {
|
|
rockchip,pins = <3 RK_PC5 2 &pcfg_pull_none_12ma>;
|
|
};
|
|
|
|
emmc_cmd: emmc-cmd {
|
|
rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up_12ma>;
|
|
};
|
|
|
|
emmc_pwren: emmc-pwren {
|
|
rockchip,pins = <3 RK_PC6 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_rstnout: emmc-rstnout {
|
|
rockchip,pins = <3 RK_PC4 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_bus1: emmc-bus1 {
|
|
rockchip,pins = <0 RK_PA7 2 &pcfg_pull_up_12ma>;
|
|
};
|
|
|
|
emmc_bus4: emmc-bus4 {
|
|
rockchip,pins =
|
|
<0 RK_PA7 2 &pcfg_pull_up_12ma>,
|
|
<2 RK_PD4 2 &pcfg_pull_up_12ma>,
|
|
<2 RK_PD5 2 &pcfg_pull_up_12ma>,
|
|
<2 RK_PD6 2 &pcfg_pull_up_12ma>;
|
|
};
|
|
|
|
emmc_bus8: emmc-bus8 {
|
|
rockchip,pins =
|
|
<0 RK_PA7 2 &pcfg_pull_up_12ma>,
|
|
<2 RK_PD4 2 &pcfg_pull_up_12ma>,
|
|
<2 RK_PD5 2 &pcfg_pull_up_12ma>,
|
|
<2 RK_PD6 2 &pcfg_pull_up_12ma>,
|
|
<2 RK_PD7 2 &pcfg_pull_up_12ma>,
|
|
<3 RK_PC0 2 &pcfg_pull_up_12ma>,
|
|
<3 RK_PC1 2 &pcfg_pull_up_12ma>,
|
|
<3 RK_PC2 2 &pcfg_pull_up_12ma>;
|
|
};
|
|
};
|
|
|
|
pwm0 {
|
|
pwm0_pin: pwm0-pin {
|
|
rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm1 {
|
|
pwm1_pin: pwm1-pin {
|
|
rockchip,pins = <2 RK_PA5 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm2 {
|
|
pwm2_pin: pwm2-pin {
|
|
rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwmir {
|
|
pwmir_pin: pwmir-pin {
|
|
rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
gmac-1 {
|
|
rgmiim1_pins: rgmiim1-pins {
|
|
rockchip,pins =
|
|
/* mac_txclk */
|
|
<1 RK_PB4 2 &pcfg_pull_none_8ma>,
|
|
/* mac_rxclk */
|
|
<1 RK_PB5 2 &pcfg_pull_none_4ma>,
|
|
/* mac_mdio */
|
|
<1 RK_PC3 2 &pcfg_pull_none_4ma>,
|
|
/* mac_txen */
|
|
<1 RK_PD1 2 &pcfg_pull_none_8ma>,
|
|
/* mac_clk */
|
|
<1 RK_PC5 2 &pcfg_pull_none_4ma>,
|
|
/* mac_rxdv */
|
|
<1 RK_PC6 2 &pcfg_pull_none_4ma>,
|
|
/* mac_mdc */
|
|
<1 RK_PC7 2 &pcfg_pull_none_4ma>,
|
|
/* mac_rxd1 */
|
|
<1 RK_PB2 2 &pcfg_pull_none_4ma>,
|
|
/* mac_rxd0 */
|
|
<1 RK_PB3 2 &pcfg_pull_none_4ma>,
|
|
/* mac_txd1 */
|
|
<1 RK_PB0 2 &pcfg_pull_none_8ma>,
|
|
/* mac_txd0 */
|
|
<1 RK_PB1 2 &pcfg_pull_none_8ma>,
|
|
/* mac_rxd3 */
|
|
<1 RK_PB6 2 &pcfg_pull_none_4ma>,
|
|
/* mac_rxd2 */
|
|
<1 RK_PB7 2 &pcfg_pull_none_4ma>,
|
|
/* mac_txd3 */
|
|
<1 RK_PC0 2 &pcfg_pull_none_8ma>,
|
|
/* mac_txd2 */
|
|
<1 RK_PC1 2 &pcfg_pull_none_8ma>,
|
|
|
|
/* mac_txclk */
|
|
<0 RK_PB0 1 &pcfg_pull_none_8ma>,
|
|
/* mac_txen */
|
|
<0 RK_PB4 1 &pcfg_pull_none_8ma>,
|
|
/* mac_clk */
|
|
<0 RK_PD0 1 &pcfg_pull_none_4ma>,
|
|
/* mac_txd1 */
|
|
<0 RK_PC0 1 &pcfg_pull_none_8ma>,
|
|
/* mac_txd0 */
|
|
<0 RK_PC1 1 &pcfg_pull_none_8ma>,
|
|
/* mac_txd3 */
|
|
<0 RK_PC7 1 &pcfg_pull_none_8ma>,
|
|
/* mac_txd2 */
|
|
<0 RK_PC6 1 &pcfg_pull_none_8ma>;
|
|
};
|
|
|
|
rmiim1_pins: rmiim1-pins {
|
|
rockchip,pins =
|
|
/* mac_mdio */
|
|
<1 RK_PC3 2 &pcfg_pull_none_2ma>,
|
|
/* mac_txen */
|
|
<1 RK_PD1 2 &pcfg_pull_none_12ma>,
|
|
/* mac_clk */
|
|
<1 RK_PC5 2 &pcfg_pull_none_2ma>,
|
|
/* mac_rxer */
|
|
<1 RK_PD0 2 &pcfg_pull_none_2ma>,
|
|
/* mac_rxdv */
|
|
<1 RK_PC6 2 &pcfg_pull_none_2ma>,
|
|
/* mac_mdc */
|
|
<1 RK_PC7 2 &pcfg_pull_none_2ma>,
|
|
/* mac_rxd1 */
|
|
<1 RK_PB2 2 &pcfg_pull_none_2ma>,
|
|
/* mac_rxd0 */
|
|
<1 RK_PB3 2 &pcfg_pull_none_2ma>,
|
|
/* mac_txd1 */
|
|
<1 RK_PB0 2 &pcfg_pull_none_12ma>,
|
|
/* mac_txd0 */
|
|
<1 RK_PB1 2 &pcfg_pull_none_12ma>,
|
|
|
|
/* mac_mdio */
|
|
<0 RK_PB3 1 &pcfg_pull_none>,
|
|
/* mac_txen */
|
|
<0 RK_PB4 1 &pcfg_pull_none>,
|
|
/* mac_clk */
|
|
<0 RK_PD0 1 &pcfg_pull_none>,
|
|
/* mac_mdc */
|
|
<0 RK_PC3 1 &pcfg_pull_none>,
|
|
/* mac_txd1 */
|
|
<0 RK_PC0 1 &pcfg_pull_none>,
|
|
/* mac_txd0 */
|
|
<0 RK_PC1 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
gmac2phy {
|
|
fephyled_speed10: fephyled-speed10 {
|
|
rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
fephyled_duplex: fephyled-duplex {
|
|
rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
fephyled_rxm1: fephyled-rxm1 {
|
|
rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
|
|
};
|
|
|
|
fephyled_txm1: fephyled-txm1 {
|
|
rockchip,pins = <2 RK_PD1 3 &pcfg_pull_none>;
|
|
};
|
|
|
|
fephyled_linkm1: fephyled-linkm1 {
|
|
rockchip,pins = <2 RK_PD0 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
tsadc_pin {
|
|
tsadc_int: tsadc-int {
|
|
rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
|
|
};
|
|
tsadc_gpio: tsadc-gpio {
|
|
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hdmi_pin {
|
|
hdmi_cec: hdmi-cec {
|
|
rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
hdmi_hpd: hdmi-hpd {
|
|
rockchip,pins = <0 RK_PA4 1 &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
cif-0 {
|
|
dvp_d2d9_m0:dvp-d2d9-m0 {
|
|
rockchip,pins =
|
|
/* cif_d0 */
|
|
<3 RK_PA4 2 &pcfg_pull_none>,
|
|
/* cif_d1 */
|
|
<3 RK_PA5 2 &pcfg_pull_none>,
|
|
/* cif_d2 */
|
|
<3 RK_PA6 2 &pcfg_pull_none>,
|
|
/* cif_d3 */
|
|
<3 RK_PA7 2 &pcfg_pull_none>,
|
|
/* cif_d4 */
|
|
<3 RK_PB0 2 &pcfg_pull_none>,
|
|
/* cif_d5m0 */
|
|
<3 RK_PB1 2 &pcfg_pull_none>,
|
|
/* cif_d6m0 */
|
|
<3 RK_PB2 2 &pcfg_pull_none>,
|
|
/* cif_d7m0 */
|
|
<3 RK_PB3 2 &pcfg_pull_none>,
|
|
/* cif_href */
|
|
<3 RK_PA1 2 &pcfg_pull_none>,
|
|
/* cif_vsync */
|
|
<3 RK_PA0 2 &pcfg_pull_none>,
|
|
/* cif_clkoutm0 */
|
|
<3 RK_PA3 2 &pcfg_pull_none>,
|
|
/* cif_clkin */
|
|
<3 RK_PA2 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
cif-1 {
|
|
dvp_d2d9_m1:dvp-d2d9-m1 {
|
|
rockchip,pins =
|
|
/* cif_d0 */
|
|
<3 RK_PA4 2 &pcfg_pull_none>,
|
|
/* cif_d1 */
|
|
<3 RK_PA5 2 &pcfg_pull_none>,
|
|
/* cif_d2 */
|
|
<3 RK_PA6 2 &pcfg_pull_none>,
|
|
/* cif_d3 */
|
|
<3 RK_PA7 2 &pcfg_pull_none>,
|
|
/* cif_d4 */
|
|
<3 RK_PB0 2 &pcfg_pull_none>,
|
|
/* cif_d5m1 */
|
|
<2 RK_PC0 4 &pcfg_pull_none>,
|
|
/* cif_d6m1 */
|
|
<2 RK_PC1 4 &pcfg_pull_none>,
|
|
/* cif_d7m1 */
|
|
<2 RK_PC2 4 &pcfg_pull_none>,
|
|
/* cif_href */
|
|
<3 RK_PA1 2 &pcfg_pull_none>,
|
|
/* cif_vsync */
|
|
<3 RK_PA0 2 &pcfg_pull_none>,
|
|
/* cif_clkoutm1 */
|
|
<2 RK_PB7 4 &pcfg_pull_none>,
|
|
/* cif_clkin */
|
|
<3 RK_PA2 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
};
|