u-boot/drivers/power/power_i2c.c
Peng Fan 6489dac3ab imx: imx8mn_evk: correct stack/malloc adress
Move SP to end of OCRAM space. Drop MALLOC_F to make it alloc from
stack space.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:30 +01:00

154 lines
3.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011 Samsung Electronics
* Lukasz Majewski <l.majewski@samsung.com>
*
* (C) Copyright 2010
* Stefano Babic, DENX Software Engineering, sbabic@denx.de
*
* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
* (C) Copyright 2019 NXP
*/
#include <common.h>
#include <log.h>
#include <linux/types.h>
#include <power/pmic.h>
#include <i2c.h>
#include <linux/compiler.h>
int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
{
unsigned char buf[4] = { 0 };
if (check_reg(p, reg))
return -EINVAL;
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
p->bus);
return -ENXIO;
}
#else /* Non DM I2C support - will be removed */
I2C_SET_BUS(p->bus);
#endif
switch (pmic_i2c_tx_num) {
case 3:
if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG) {
buf[2] = (cpu_to_le32(val) >> 16) & 0xff;
buf[1] = (cpu_to_le32(val) >> 8) & 0xff;
buf[0] = cpu_to_le32(val) & 0xff;
} else {
buf[0] = (cpu_to_le32(val) >> 16) & 0xff;
buf[1] = (cpu_to_le32(val) >> 8) & 0xff;
buf[2] = cpu_to_le32(val) & 0xff;
}
break;
case 2:
if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG) {
buf[1] = (cpu_to_le32(val) >> 8) & 0xff;
buf[0] = cpu_to_le32(val) & 0xff;
} else {
buf[0] = (cpu_to_le32(val) >> 8) & 0xff;
buf[1] = cpu_to_le32(val) & 0xff;
}
break;
case 1:
buf[0] = cpu_to_le32(val) & 0xff;
break;
default:
printf("%s: invalid tx_num: %d", __func__, pmic_i2c_tx_num);
return -EINVAL;
}
#if CONFIG_IS_ENABLED(DM_I2C)
return dm_i2c_write(dev, reg, buf, pmic_i2c_tx_num);
#else
return i2c_write(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
#endif
}
int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
{
unsigned char buf[4] = { 0 };
u32 ret_val = 0;
int ret;
if (check_reg(p, reg))
return -EINVAL;
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev;
ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
p->bus);
return -ENXIO;
}
ret = dm_i2c_read(dev, reg, buf, pmic_i2c_tx_num);
#else /* Non DM I2C support - will be removed */
I2C_SET_BUS(p->bus);
ret = i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
#endif
if (ret)
return ret;
switch (pmic_i2c_tx_num) {
case 3:
if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG)
ret_val = le32_to_cpu(buf[2] << 16
| buf[1] << 8 | buf[0]);
else
ret_val = le32_to_cpu(buf[0] << 16 |
buf[1] << 8 | buf[2]);
break;
case 2:
if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG)
ret_val = le32_to_cpu(buf[1] << 8 | buf[0]);
else
ret_val = le32_to_cpu(buf[0] << 8 | buf[1]);
break;
case 1:
ret_val = le32_to_cpu(buf[0]);
break;
default:
printf("%s: invalid tx_num: %d", __func__, pmic_i2c_tx_num);
return -EINVAL;
}
memcpy(val, &ret_val, sizeof(ret_val));
return 0;
}
int pmic_probe(struct pmic *p)
{
debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name);
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
p->bus);
return -ENXIO;
}
#else /* Non DM I2C support - will be removed */
i2c_set_bus_num(p->bus);
if (i2c_probe(pmic_i2c_addr)) {
printf("Can't find PMIC:%s\n", p->name);
return -ENODEV;
}
#endif
return 0;
}