u-boot/arch/powerpc/cpu/ppc4xx/fdt.c
Tom Rini 26d61195f8 fdt: Move fdt_fixup_ethernet to a common place
With 3f66149d9f we no longer have a common call fdt_fixup_ethernet.
This was fine to do on PowerPC as they largely had calls already in
ft_cpu_fixup.  On ARM however we largely relied on this call.  Rather
than introduce a large number of changes to ft_cpu_fixup /
ft_board_fixup we recognize that this is a common enough call that we
should be doing it in a central location.  Do it early enough that we
can do any further updates in ft_cpu_fixup / ft_board_fixup.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Chou <thomas@wytron.com.tw> (maintainer:NIOS)
Cc: York Sun <york.sun@nxp.com> (maintainer:POWERPC MPC85XX)
Cc: Stefan Roese <sr@denx.de> (maintainer:POWERPC PPC4XX)
Cc: Simon Glass <sjg@chromium.org>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Fixes: 3f66149d9f ("Remove extra fdt_fixup_ethernet() call")
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <york.sun@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-01 09:11:59 -04:00

157 lines
4 KiB
C

/*
* (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <asm/cache.h>
#include <asm/ppc4xx.h>
#ifdef CONFIG_OF_BOARD_SETUP
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/4xx_pcie.h>
DECLARE_GLOBAL_DATA_PTR;
int __ft_board_setup(void *blob, bd_t *bd)
{
int rc;
int i;
u32 bxcr;
u32 ranges[EBC_NUM_BANKS * 4];
u32 *p = ranges;
char ebc_path[] = "/plb/opb/ebc";
ft_cpu_setup(blob, bd);
/*
* Read 4xx EBC bus bridge registers to get mappings of the
* peripheral banks into the OPB/PLB address space
*/
for (i = 0; i < EBC_NUM_BANKS; i++) {
mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
bxcr = mfdcr(EBC0_CFGDATA);
if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
*p++ = i;
*p++ = 0;
*p++ = bxcr & EBC_BXCR_BAS_MASK;
*p++ = EBC_BXCR_BANK_SIZE(bxcr);
}
}
#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
/* Update reg property in all nor flash nodes too */
fdt_fixup_nor_flash_size(blob);
#endif
/* Some 405 PPC's have EBC as direct PLB child in the dts */
if (fdt_path_offset(blob, ebc_path) < 0)
strcpy(ebc_path, "/plb/ebc");
rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
(p - ranges) * sizeof(u32), 1);
if (rc) {
printf("Unable to update property EBC mappings, err=%s\n",
fdt_strerror(rc));
}
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
__attribute__((weak, alias("__ft_board_setup")));
/*
* Fixup all PCIe nodes by setting the device_type property
* to "pci-endpoint" instead is "pci" for endpoint ports.
* This property will get checked later by the Linux driver
* to properly configure the PCIe port in Linux (again).
*/
void fdt_pcie_setup(void *blob)
{
const char *compat = "ibm,plb-pciex";
const char *prop = "device_type";
const char *prop_val = "pci-endpoint";
const u32 *port;
int no;
int rc;
/* Search first PCIe node */
no = fdt_node_offset_by_compatible(blob, -1, compat);
while (no != -FDT_ERR_NOTFOUND) {
port = fdt_getprop(blob, no, "port", NULL);
if (port == NULL) {
printf("WARNING: could not find port property\n");
} else {
if (is_end_point(*port)) {
rc = fdt_setprop(blob, no, prop, prop_val,
strlen(prop_val) + 1);
if (rc < 0)
printf("WARNING: could not set %s for %s: %s.\n",
prop, compat, fdt_strerror(rc));
}
}
/* Jump to next PCIe node */
no = fdt_node_offset_by_compatible(blob, no, compat);
}
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
sys_info_t sys_info;
int off, ndepth = 0;
get_sys_info(&sys_info);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency",
bd->bi_intfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency",
bd->bi_intfreq, 1);
do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0)
do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
sys_info.freqEBC, 1);
else
do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency",
sys_info.freqEBC, 1);
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
/*
* Fixup all UART clocks for CPU internal UARTs
* (only these UARTs are definitely clocked by gd->arch.uart_clk)
*
* These UARTs are direct childs of /plb/opb. This code
* does not touch any UARTs that are connected to the ebc.
*/
off = fdt_path_offset(blob, "/plb/opb");
while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
/*
* process all sub nodes and stop when we are back
* at the starting depth
*/
if (ndepth <= 0)
break;
/* only update direct childs */
if ((ndepth == 1) &&
(fdt_node_check_compatible(blob, off, "ns16550") == 0))
fdt_setprop(blob, off,
"clock-frequency",
(void *)&gd->arch.uart_clk, 4);
}
/*
* Fixup all available PCIe nodes by setting the device_type property
*/
fdt_pcie_setup(blob);
}
#endif /* CONFIG_OF_BOARD_SETUP */