u-boot/board/sifive/unmatched/spl.c
Vincent Chen 219cb17311 board: sifive: unmatched: reset USB hub, PCIe-USB bridge, and ULPI device in SPL
Ensure USB hub, PCIe-USB bridge, and ULPI device to be reset
even if the rebooting is without power-cycling.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21 22:25:15 +08:00

141 lines
2.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2020-2021 SiFive, Inc
*
* Authors:
* Pragnesh Patel <pragnesh.patel@sifive.com>
*/
#include <init.h>
#include <spl.h>
#include <misc.h>
#include <log.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#include <asm/arch/spl.h>
#define UBRDG_RESET SIFIVE_GENERIC_GPIO_NR(0, 7)
#define ULPI_RESET SIFIVE_GENERIC_GPIO_NR(0, 9)
#define UHUB_RESET SIFIVE_GENERIC_GPIO_NR(0, 11)
#define GEM_PHY_RESET SIFIVE_GENERIC_GPIO_NR(0, 12)
#define MODE_SELECT_REG 0x1000
#define MODE_SELECT_SD 0xb
#define MODE_SELECT_MASK GENMASK(3, 0)
static inline int spl_reset_device_by_gpio(const char *label, int pin, int low_width)
{
int ret;
ret = gpio_request(pin, label);
if (ret) {
debug("%s gpio request failed: %d\n", label, ret);
return ret;
}
ret = gpio_direction_output(pin, 1);
if (ret) {
debug("%s gpio direction set failed: %d\n", label, ret);
return ret;
}
udelay(1);
gpio_set_value(pin, 0);
udelay(low_width);
gpio_set_value(pin, 1);
return ret;
}
static inline int spl_gemgxl_init(void)
{
int ret;
/*
* GEMGXL init VSC8541 PHY reset sequence;
* leave pull-down active for 2ms
*/
udelay(2000);
ret = spl_reset_device_by_gpio("gem_phy_reset", GEM_PHY_RESET, 1);
mdelay(15);
return ret;
}
static inline int spl_usb_pcie_bridge_init(void)
{
return spl_reset_device_by_gpio("usb_pcie_bridge_reset", UBRDG_RESET, 3000);
}
static inline int spl_usb_hub_init(void)
{
return spl_reset_device_by_gpio("usb_hub_reset", UHUB_RESET, 100);
}
static inline int spl_ulpi_init(void)
{
return spl_reset_device_by_gpio("ulpi_reset", ULPI_RESET, 1);
}
int spl_board_init_f(void)
{
int ret;
ret = spl_soc_init();
if (ret) {
debug("HiFive Unmatched FU740 SPL init failed: %d\n", ret);
goto end;
}
ret = spl_gemgxl_init();
if (ret) {
debug("Gigabit ethernet PHY (VSC8541) init failed: %d\n", ret);
goto end;
}
ret = spl_usb_pcie_bridge_init();
if (ret) {
debug("USB Bridge (ASM1042A) init failed: %d\n", ret);
goto end;
}
ret = spl_usb_hub_init();
if (ret) {
debug("USB Hub (ASM1074) init failed: %d\n", ret);
goto end;
}
ret = spl_ulpi_init();
if (ret) {
debug("USB 2.0 PHY (USB3320C) init failed: %d\n", ret);
goto end;
}
end:
return ret;
}
u32 spl_boot_device(void)
{
u32 mode_select = readl((void *)MODE_SELECT_REG);
u32 boot_device = mode_select & MODE_SELECT_MASK;
switch (boot_device) {
case MODE_SELECT_SD:
return BOOT_DEVICE_MMC1;
default:
debug("Unsupported boot device 0x%x but trying MMC1\n",
boot_device);
return BOOT_DEVICE_MMC1;
}
}
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
/* boot using first FIT config */
return 0;
}
#endif