u-boot/board/toradex/colibri-imx8x/colibri-imx8qxp-imximage.cfg
Marcel Ziswiler 7ce134b7c3 board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support
This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB
IT V1.0B module. Unlike the V1.0A early access samples exclusively
booting from SD card, they are now strapped to boot from eFuses which
are factory fused to properly boot from their on-module eMMC. U-Boot
supports either booting from the on-module eMMC or may be used for
recovery purpose using the universal update utility (uuu) aka mfgtools
3.0.

Functionality wise the following is known to be working:
- eMMC and MMC/SD card
- Ethernet
- GPIOs
- I2C

Unfortunately, there is no USB functionality for the i.MX 8QXP as of
yet.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-11 10:42:48 +02:00

24 lines
643 B
INI

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2019 Toradex
*
* Refer doc/README.imx8image for more details about how-to configure
* and create imx8image boot image
*/
#define __ASSEMBLY__
/* Boot from SD, sector size 0x400 */
BOOT_FROM EMMC_FASTBOOT 0x400
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
/* Append seco container image */
APPEND mx8qx-ahab-container.img
/* Create the 2nd container */
CONTAINER
/* Add scfw image with exec attribute */
IMAGE SCU mx8qx-colibri-scfw-tcm.bin
/* Add ATF image with exec attribute */
IMAGE A35 bl31.bin 0x80000000
/* Add U-Boot image with load attribute */
DATA A35 u-boot-dtb.bin 0x80020000