u-boot/drivers/phy/marvell/utmi_phy.h
Stefan Roese c0132f6005 drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 7K/8K
This version is based on the Marvell U-Boot version with this patch
applied as latest patch:

Git ID 7f408573: "fix: comphy: cp110: add comphy initialization for usb
device mode" from 2016-07-05.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
2016-09-27 17:29:54 +02:00

90 lines
3 KiB
C

/*
* Copyright (C) 2015-2016 Marvell International Ltd.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _UTMI_PHY_H_
#define _UTMI_PHY_H_
#define UTMI_USB_CFG_DEVICE_EN_OFFSET 0
#define UTMI_USB_CFG_DEVICE_EN_MASK \
(0x1 << UTMI_USB_CFG_DEVICE_EN_OFFSET)
#define UTMI_USB_CFG_DEVICE_MUX_OFFSET 1
#define UTMI_USB_CFG_DEVICE_MUX_MASK \
(0x1 << UTMI_USB_CFG_DEVICE_MUX_OFFSET)
#define UTMI_USB_CFG_PLL_OFFSET 25
#define UTMI_USB_CFG_PLL_MASK \
(0x1 << UTMI_USB_CFG_PLL_OFFSET)
#define UTMI_PHY_CFG_PU_OFFSET 5
#define UTMI_PHY_CFG_PU_MASK \
(0x1 << UTMI_PHY_CFG_PU_OFFSET)
#define UTMI_PLL_CTRL_REG 0x0
#define UTMI_PLL_CTRL_REFDIV_OFFSET 0
#define UTMI_PLL_CTRL_REFDIV_MASK \
(0x7f << UTMI_PLL_CTRL_REFDIV_OFFSET)
#define UTMI_PLL_CTRL_FBDIV_OFFSET 16
#define UTMI_PLL_CTRL_FBDIV_MASK \
(0x1FF << UTMI_PLL_CTRL_FBDIV_OFFSET)
#define UTMI_PLL_CTRL_SEL_LPFR_OFFSET 28
#define UTMI_PLL_CTRL_SEL_LPFR_MASK \
(0x3 << UTMI_PLL_CTRL_SEL_LPFR_OFFSET)
#define UTMI_PLL_CTRL_PLL_RDY_OFFSET 31
#define UTMI_PLL_CTRL_PLL_RDY_MASK \
(0x1 << UTMI_PLL_CTRL_PLL_RDY_OFFSET)
#define UTMI_CALIB_CTRL_REG 0x8
#define UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET 8
#define UTMI_CALIB_CTRL_IMPCAL_VTH_MASK \
(0x7 << UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET)
#define UTMI_CALIB_CTRL_IMPCAL_DONE_OFFSET 23
#define UTMI_CALIB_CTRL_IMPCAL_DONE_MASK \
(0x1 << UTMI_CALIB_CTRL_IMPCAL_DONE_OFFSET)
#define UTMI_CALIB_CTRL_PLLCAL_DONE_OFFSET 31
#define UTMI_CALIB_CTRL_PLLCAL_DONE_MASK \
(0x1 << UTMI_CALIB_CTRL_PLLCAL_DONE_OFFSET)
#define UTMI_TX_CH_CTRL_REG 0xC
#define UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET 12
#define UTMI_TX_CH_CTRL_DRV_EN_LS_MASK \
(0xf << UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET)
#define UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET 16
#define UTMI_TX_CH_CTRL_IMP_SEL_LS_MASK \
(0xf << UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET)
#define UTMI_RX_CH_CTRL0_REG 0x14
#define UTMI_RX_CH_CTRL0_SQ_DET_OFFSET 15
#define UTMI_RX_CH_CTRL0_SQ_DET_MASK \
(0x1 << UTMI_RX_CH_CTRL0_SQ_DET_OFFSET)
#define UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET 28
#define UTMI_RX_CH_CTRL0_SQ_ANA_DTC_MASK \
(0x1 << UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET)
#define UTMI_RX_CH_CTRL1_REG 0x18
#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET 0
#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_MASK \
(0x3 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET)
#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET 3
#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_MASK \
(0x1 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET)
#define UTMI_CTRL_STATUS0_REG 0x24
#define UTMI_CTRL_STATUS0_SUSPENDM_OFFSET 22
#define UTMI_CTRL_STATUS0_SUSPENDM_MASK \
(0x1 << UTMI_CTRL_STATUS0_SUSPENDM_OFFSET)
#define UTMI_CTRL_STATUS0_TEST_SEL_OFFSET 25
#define UTMI_CTRL_STATUS0_TEST_SEL_MASK \
(0x1 << UTMI_CTRL_STATUS0_TEST_SEL_OFFSET)
#define UTMI_CHGDTC_CTRL_REG 0x38
#define UTMI_CHGDTC_CTRL_VDAT_OFFSET 8
#define UTMI_CHGDTC_CTRL_VDAT_MASK \
(0x3 << UTMI_CHGDTC_CTRL_VDAT_OFFSET)
#define UTMI_CHGDTC_CTRL_VSRC_OFFSET 10
#define UTMI_CHGDTC_CTRL_VSRC_MASK \
(0x3 << UTMI_CHGDTC_CTRL_VSRC_OFFSET)
#endif /* _UTMI_PHY_H_ */