u-boot/configs/snow_defconfig
Tom Rini a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00

93 lines
2.1 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43E00000
CONFIG_ARCH_EXYNOS5=y
CONFIG_TARGET_SNOW=y
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x3FC000
CONFIG_NR_DRAM_BANKS=8
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0x12c30000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_ENV_SECT_SIZE=0x4000
CONFIG_IDENT_STRING=" for snow"
CONFIG_DEBUG_UART=y
CONFIG_SPL_TEXT_BASE=0x02023400
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SYS_PROMPT="snow # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_SOUND=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_TPM=y
CONFIG_CMD_TPM_TEST=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=1
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_CROS_EC_KEYB=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S5P=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=50000000
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_MAX77686=y
CONFIG_PMIC_S5M8767=y
CONFIG_PMIC_TPS65090=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_DM_PWM=y
CONFIG_PWM_EXYNOS=y
CONFIG_DEBUG_UART_S5P=y
CONFIG_SOUND=y
CONFIG_I2S=y
CONFIG_I2S_SAMSUNG=y
CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
CONFIG_EXYNOS_SPI=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_DM_VIDEO=y
CONFIG_VIDCONSOLE_AS_LCD=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_VIDEO_BRIDGE_NXP_PTN3460=y
CONFIG_LCD=y
CONFIG_TPM=y
CONFIG_ERRNO_STR=y