mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 20:43:32 +00:00
fd6e425be2
Add sfc and flash node to device tree and config options to enable support for booting from SPI NOR flash on Radxa ROCK 5 Model B. Similar to RK3568 the BootRom in RK3588 can read all data and look for idbloader at 0x8000, same as on SD and eMMC. Use the rksd format and modify the mkimage offset to generate a bootable u-boot-rockchip-spi.bin that can be written to 0x0 of SPI NOR flash. The FIT image is loaded from 0x60000. => sf probe SF: Detected mx25u12835f with page size 256 Bytes, erase size 4 KiB, total 16 MiB => load mmc 1:1 10000000 u-boot-rockchip-spi.bin 1492992 bytes read in 129 ms (11 MiB/s) => sf update $fileaddr 0 $filesize device 0 offset 0x0, size 0x16c800 1300480 bytes written, 192512 bytes skipped in 11.103s, speed 137694 B/s The BROM_BOOTSOURCE_ID value read back when booting from SPI flash does not match the expected value of 3 (SPINOR) used by other SoCs. Instead a value of 6 is read back, add a new enum value to handle this new bootsource id. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
165 lines
4.8 KiB
C
165 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd
|
|
* Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <spl.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/bootrom.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/ioc_rk3588.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define FIREWALL_DDR_BASE 0xfe030000
|
|
#define FW_DDR_MST5_REG 0x54
|
|
#define FW_DDR_MST13_REG 0x74
|
|
#define FW_DDR_MST21_REG 0x94
|
|
#define FW_DDR_MST26_REG 0xa8
|
|
#define FW_DDR_MST27_REG 0xac
|
|
#define FIREWALL_SYSMEM_BASE 0xfe038000
|
|
#define FW_SYSM_MST5_REG 0x54
|
|
#define FW_SYSM_MST13_REG 0x74
|
|
#define FW_SYSM_MST21_REG 0x94
|
|
#define FW_SYSM_MST26_REG 0xa8
|
|
#define FW_SYSM_MST27_REG 0xac
|
|
|
|
#define PMU1_IOC_BASE 0xfd5f0000
|
|
#define PMU2_IOC_BASE 0xfd5f4000
|
|
|
|
#define BUS_IOC_BASE 0xfd5f8000
|
|
#define BUS_IOC_GPIO2A_IOMUX_SEL_L 0x40
|
|
#define BUS_IOC_GPIO2B_IOMUX_SEL_L 0x48
|
|
#define BUS_IOC_GPIO2D_IOMUX_SEL_L 0x58
|
|
#define BUS_IOC_GPIO2D_IOMUX_SEL_H 0x5c
|
|
#define BUS_IOC_GPIO3A_IOMUX_SEL_L 0x60
|
|
|
|
const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
|
|
[BROM_BOOTSOURCE_EMMC] = "/mmc@fe2e0000",
|
|
[BROM_BOOTSOURCE_SPINOR] = "/spi@fe2b0000/flash@0",
|
|
[BROM_BOOTSOURCE_SD] = "/mmc@fe2c0000",
|
|
[BROM_BOOTSOURCE_SPINOR_RK3588] = "/spi@fe2b0000/flash@0",
|
|
};
|
|
|
|
static struct mm_region rk3588_mem_map[] = {
|
|
{
|
|
.virt = 0x0UL,
|
|
.phys = 0x0UL,
|
|
.size = 0xf0000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
}, {
|
|
.virt = 0xf0000000UL,
|
|
.phys = 0xf0000000UL,
|
|
.size = 0x10000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
.virt = 0x900000000,
|
|
.phys = 0x900000000,
|
|
.size = 0x150000000,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = rk3588_mem_map;
|
|
|
|
/* GPIO0B_IOMUX_SEL_H */
|
|
enum {
|
|
GPIO0B5_SHIFT = 4,
|
|
GPIO0B5_MASK = GENMASK(7, 4),
|
|
GPIO0B5_REFER = 8,
|
|
GPIO0B5_UART2_TX_M0 = 10,
|
|
|
|
GPIO0B6_SHIFT = 8,
|
|
GPIO0B6_MASK = GENMASK(11, 8),
|
|
GPIO0B6_REFER = 8,
|
|
GPIO0B6_UART2_RX_M0 = 10,
|
|
};
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
__maybe_unused static struct rk3588_bus_ioc * const bus_ioc = (void *)BUS_IOC_BASE;
|
|
static struct rk3588_pmu2_ioc * const pmu2_ioc = (void *)PMU2_IOC_BASE;
|
|
|
|
/* Refer to BUS_IOC */
|
|
rk_clrsetreg(&pmu2_ioc->gpio0b_iomux_sel_h,
|
|
GPIO0B6_MASK | GPIO0B5_MASK,
|
|
GPIO0B6_REFER << GPIO0B6_SHIFT |
|
|
GPIO0B5_REFER << GPIO0B5_SHIFT);
|
|
|
|
/* UART2_M0 Switch iomux */
|
|
rk_clrsetreg(&bus_ioc->gpio0b_iomux_sel_h,
|
|
GPIO0B6_MASK | GPIO0B5_MASK,
|
|
GPIO0B6_UART2_RX_M0 << GPIO0B6_SHIFT |
|
|
GPIO0B5_UART2_TX_M0 << GPIO0B5_SHIFT);
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void rockchip_stimer_init(void)
|
|
{
|
|
/* If Timer already enabled, don't re-init it */
|
|
u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + 0x4);
|
|
|
|
if (reg & 0x1)
|
|
return;
|
|
|
|
asm volatile("msr CNTFRQ_EL0, %0" : : "r" (CONFIG_COUNTER_FREQUENCY));
|
|
writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 0x14);
|
|
writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 0x18);
|
|
writel(0x1, CONFIG_ROCKCHIP_STIMER_BASE + 0x4);
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_TPL_BUILD
|
|
int arch_cpu_init(void)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
int secure_reg;
|
|
|
|
/* Set the SDMMC eMMC crypto_ns FSPI access secure area */
|
|
secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST5_REG);
|
|
secure_reg &= 0xffff;
|
|
writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST5_REG);
|
|
secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST13_REG);
|
|
secure_reg &= 0xffff;
|
|
writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST13_REG);
|
|
secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST21_REG);
|
|
secure_reg &= 0xffff;
|
|
writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST21_REG);
|
|
secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST26_REG);
|
|
secure_reg &= 0xffff;
|
|
writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST26_REG);
|
|
secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST27_REG);
|
|
secure_reg &= 0xffff0000;
|
|
writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST27_REG);
|
|
|
|
secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST5_REG);
|
|
secure_reg &= 0xffff;
|
|
writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST5_REG);
|
|
secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST13_REG);
|
|
secure_reg &= 0xffff;
|
|
writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST13_REG);
|
|
secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST21_REG);
|
|
secure_reg &= 0xffff;
|
|
writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST21_REG);
|
|
secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST26_REG);
|
|
secure_reg &= 0xffff;
|
|
writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST26_REG);
|
|
secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST27_REG);
|
|
secure_reg &= 0xffff0000;
|
|
writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST27_REG);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|