u-boot/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
Mario Six 21c1502a4a mpc83xx: Kconfig: Migrate HRCW to Kconfig
The HRCW (hardware reset configuration word) is a constant that must be
hard-coded into the boot loader image. So, it must be available at
compile time, and cannot be migrated to the DT mechanism, but has to be
kept in Kconfig.

Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 07:52:25 +02:00

816 lines
16 KiB
Text

menu "Reset Configuration Word"
choice
prompt "Local bus memory controller clock mode"
config LBMC_CLOCK_MODE_1_1
bool "1 : 1"
config LBMC_CLOCK_MODE_1_2
depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
bool "1 : 2"
endchoice
choice
prompt "DDR SDRAM memory controller clock mode"
config DDR_MC_CLOCK_MODE_1_2
bool "1 : 2"
config DDR_MC_CLOCK_MODE_1_1
depends on ARCH_MPC8315 || ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
bool "1 : 1"
endchoice
if !ARCH_MPC8313 && !ARCH_MPC832X && !ARCH_MPC8349
choice
prompt "System PLL VCO division"
config SYSTEM_PLL_VCO_DIV_1
depends on !ARCH_MPC837X
bool "1"
config SYSTEM_PLL_VCO_DIV_2
bool "2"
config SYSTEM_PLL_VCO_DIV_4
depends on !ARCH_MPC831X
bool "4"
config SYSTEM_PLL_VCO_DIV_8
depends on !ARCH_MPC831X
bool "8"
endchoice
endif
choice
prompt "System PLL multiplication factor"
config SYSTEM_PLL_FACTOR_2_1
bool "2 : 1"
config SYSTEM_PLL_FACTOR_3_1
bool "3 : 1"
config SYSTEM_PLL_FACTOR_4_1
bool "4 : 1"
config SYSTEM_PLL_FACTOR_5_1
bool "5 : 1"
config SYSTEM_PLL_FACTOR_6_1
bool "6 : 1"
config SYSTEM_PLL_FACTOR_7_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "7 : 1"
config SYSTEM_PLL_FACTOR_8_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "8 : 1"
config SYSTEM_PLL_FACTOR_9_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "9 : 1"
config SYSTEM_PLL_FACTOR_10_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "10 : 1"
config SYSTEM_PLL_FACTOR_11_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "11 : 1"
config SYSTEM_PLL_FACTOR_12_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "12 : 1"
config SYSTEM_PLL_FACTOR_13_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "13 : 1"
config SYSTEM_PLL_FACTOR_14_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "14 : 1"
config SYSTEM_PLL_FACTOR_15_1
depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
bool "15 : 1"
config SYSTEM_PLL_FACTOR_16_1
depends on ARCH_MPC8349 || ARCH_MPV8360
bool "16 : 1"
endchoice
config CORE_PLL_BYPASS
bool "Core PLL bypassed"
if !CORE_PLL_BYPASS
choice
prompt "Core PLL Ratio"
config CORE_PLL_RATIO_1_1
bool "1 : 1"
config CORE_PLL_RATIO_15_1
bool "1.5 : 1"
config CORE_PLL_RATIO_2_1
bool "2 : 1"
config CORE_PLL_RATIO_25_1
bool "2.5 : 1"
config CORE_PLL_RATIO_3_1
bool "3 : 1"
endchoice
choice
prompt "Core PLL VCO Divider"
config CORE_PLL_VCO_DIVIDER_2
bool "2"
config CORE_PLL_VCO_DIVIDER_4
bool "4"
config CORE_PLL_VCO_DIVIDER_8
depends on !ARCH_MPC8315
bool "8"
endchoice
endif
if MPC83XX_QUICC_ENGINE
choice
prompt "QUICC Engine PLL VCO Divider"
config QUICC_VCO_DIVIDER_2
bool "2"
config QUICC_VCO_DIVIDER_4
bool "4"
config QUICC_VCO_DIVIDER_8
depends on ARCH_MPC8309
bool "8"
endchoice
choice
prompt "QUICC Engine PLL division factor"
config QUICC_DIV_FACTOR_1
bool "1"
config QUICC_DIV_FACTOR_2
bool "2"
endchoice
choice
prompt "QUICC Engine PLL multiplication factor"
config QUICC_MULT_FACTOR_2
bool "2"
config QUICC_MULT_FACTOR_3
bool "3"
config QUICC_MULT_FACTOR_4
bool "4"
config QUICC_MULT_FACTOR_5
bool "5"
config QUICC_MULT_FACTOR_6
bool "6"
config QUICC_MULT_FACTOR_7
bool "7"
config QUICC_MULT_FACTOR_8
bool "8"
config QUICC_MULT_FACTOR_9
depends on ARCH_MPC8360
bool "9"
config QUICC_MULT_FACTOR_10
depends on ARCH_MPC8360
bool "10"
config QUICC_MULT_FACTOR_11
depends on ARCH_MPC8360
bool "11"
config QUICC_MULT_FACTOR_12
depends on ARCH_MPC8360
bool "12"
config QUICC_MULT_FACTOR_13
depends on ARCH_MPC8360
bool "13"
config QUICC_MULT_FACTOR_14
depends on ARCH_MPC8360
bool "14"
config QUICC_MULT_FACTOR_15
depends on ARCH_MPC8360
bool "15"
config QUICC_MULT_FACTOR_16
depends on ARCH_MPC8360
bool "16"
config QUICC_MULT_FACTOR_17
depends on ARCH_MPC8360
bool "17"
config QUICC_MULT_FACTOR_18
depends on ARCH_MPC8360
bool "18"
config QUICC_MULT_FACTOR_19
depends on ARCH_MPC8360
bool "19"
config QUICC_MULT_FACTOR_20
depends on ARCH_MPC8360
bool "20"
config QUICC_MULT_FACTOR_21
depends on ARCH_MPC8360
bool "21"
config QUICC_MULT_FACTOR_22
depends on ARCH_MPC8360
bool "22"
config QUICC_MULT_FACTOR_23
depends on ARCH_MPC8360
bool "23"
config QUICC_MULT_FACTOR_24
depends on ARCH_MPC8360
bool "24"
config QUICC_MULT_FACTOR_25
depends on ARCH_MPC8360
bool "25"
config QUICC_MULT_FACTOR_26
depends on ARCH_MPC8360
bool "26"
config QUICC_MULT_FACTOR_27
depends on ARCH_MPC8360
bool "27"
config QUICC_MULT_FACTOR_28
depends on ARCH_MPC8360
bool "28"
config QUICC_MULT_FACTOR_29
depends on ARCH_MPC8360
bool "29"
config QUICC_MULT_FACTOR_30
depends on ARCH_MPC8360
bool "30"
config QUICC_MULT_FACTOR_31
depends on ARCH_MPC8360
bool "31"
endchoice
endif
if MPC83XX_PCI_SUPPORT
choice
prompt "PCI host mode"
config PCI_HOST_MODE_DISABLE
bool "Disabled"
config PCI_HOST_MODE_ENABLE
bool "Enabled"
endchoice
if ARCH_MPC8349
choice
prompt "PCI 64-bit mode"
config PCI_64BIT_MODE_DISABLE
bool "Disabled"
config PCI_64BIT_MODE_ENABLE
bool "Enabled"
endchoice
endif
choice
prompt "PCI internal arbiter 1 mode"
config PCI_INT_ARBITER1_DISABLE
bool "Disabled"
config PCI_INT_ARBITER1_ENABLE
bool "Enabled"
endchoice
if ARCH_MPC8349
choice
prompt "PCI internal arbiter 2 mode"
config PCI_INT_ARBITER2_DISABLE
bool "Disabled"
config PCI_INT_ARBITER2_ENABLE
bool "Enabled"
endchoice
endif
if ARCH_MPC8360
choice
prompt "PCI clock output drive"
config PCI_CLOCK_OUTPUT_DRIVE_DISABLE
bool "Disabled"
config PCI_CLOCK_OUTPUT_DRIVE_ENABLE
bool "Enabled"
endchoice
endif
endif
choice
prompt "Core disable mode"
config CORE_DISABLE_MODE_OFF
bool "Off"
config CORE_DISABLE_MODE_ON
bool "On"
endchoice
choice
prompt "Boot Memory Space"
config BOOT_MEMORY_SPACE_HIGH
bool "High"
config BOOT_MEMORY_SPACE_LOW
bool "Low"
endchoice
choice
prompt "Boot Sequencer Configuration"
config BOOT_SEQUENCER_DISABLED
bool "Disabled"
config BOOT_SEQUENCER_NORMAL_I2C
bool "Normal I2C"
config BOOT_SEQUENCER_EXTENDED_I2C
bool "Extended I2C"
endchoice
choice
prompt "Software Watchdog"
config SOFTWARE_WATCHDOG_DISABLED
bool "Disabled"
config SOFTWARE_WATCHDOG_ENABLED
bool "Enabled"
endchoice
choice
prompt "Boot ROM interface location"
config BOOT_ROM_INTERFACE_DDR_SDRAM
bool "DDR_SDRAM"
config BOOT_ROM_INTERFACE_PCI1
depends on MPC83XX_PCI_SUPPORT
bool "PCI1"
config BOOT_ROM_INTERFACE_PCI2
depends on MPC83XX_PCI_SUPPORT && ARCH_MPC8349
bool "PCI2"
config BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
depends on ARCH_MPC837X
bool "PCI2"
config BOOT_ROM_INTERFACE_ESDHC
depends on ARCH_MPC8309
bool "eSDHC"
config BOOT_ROM_INTERFACE_SPI
depends on ARCH_MPC8309
bool "SPI"
config BOOT_ROM_INTERFACE_GPCM_8BIT
bool "Local bus GPCM - 8-bit ROM"
config BOOT_ROM_INTERFACE_GPCM_16BIT
bool "Local bus GPCM - 16-bit ROM"
config BOOT_ROM_INTERFACE_GPCM_32BIT
depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
bool "Local bus GPCM - 32-bit ROM"
config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL
depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
bool "Local bus NAND Flash- 8-bit small page ROM"
config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE
depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
bool "Local bus NAND Flash- 8-bit large page ROM"
endchoice
if MPC83XX_TSEC1_SUPPORT
choice
prompt "TSEC1 mode"
config TSEC1_MODE_MII
depends on !ARCH_MPC8349
bool "MII"
config TSEC1_MODE_RMII
depends on ARCH_MPC831X && !ARCH_MPC8349
bool "RMII"
config TSEC1_MODE_RGMII
bool "RGMII"
config TSEC1_MODE_RTBI
depends on ARCH_MPC831X || ARCH_MPC837X
bool "RTBI"
config TSEC1_MODE_GMII
depends on ARCH_MPC8349
bool "GMII"
config TSEC1_MODE_TBI
depends on ARCH_MPC8349
bool "TBI"
config TSEC1_MODE_SGMII
depends on ARCH_MPC831X || ARCH_MPC837X
bool "SGMII"
endchoice
endif
if MPC83XX_TSEC2_SUPPORT
choice
prompt "TSEC2 mode"
config TSEC2_MODE_MII
depends on !ARCH_MPC8349
bool "MII"
config TSEC2_MODE_RMII
depends on ARCH_MPC831X && !ARCH_MPC8349
bool "RMII"
config TSEC2_MODE_RGMII
bool "RGMII"
config TSEC2_MODE_RTBI
depends on ARCH_MPC831X || ARCH_MPC837X
bool "RTBI"
config TSEC2_MODE_GMII
depends on ARCH_MPC8349
bool "GMII"
config TSEC2_MODE_TBI
depends on ARCH_MPC8349
bool "TBI"
config TSEC2_MODE_SGMII
depends on ARCH_MPC831X || ARCH_MPC837X
bool "SGMII"
endchoice
endif
choice
prompt "True litle-endian mode"
config TRUE_LITTLE_ENDIAN_BIG_ENDIAN
bool "Big-endian"
config TRUE_LITTLE_ENDIAN_LITTLE_ENDIAN
bool "Little-endian"
endchoice
if ARCH_MPC8360
choice
prompt "Secondary DDR IO"
config SECONDARY_DDR_IO_DISABLE
bool "Disable"
config SECONDARY_DDR_IO_ENABLE
bool "Enable"
endchoice
endif
if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8349 || ARCH_MPC8360
choice
prompt "LALE timing"
config LALE_TIMING_NORMAL
bool "Normal"
config LALE_TIMING_EARLIER
bool "Earlier"
endchoice
endif
if MPC83XX_LDP_PIN
choice
prompt "LDP pin mux state"
config LDP_PIN_MUX_STATE_1
bool "Inital value 1"
config LDP_PIN_MUX_STATE_0
bool "Inital value 0"
endchoice
endif
endmenu
config LBMC_CLOCK_MODE
int
default 0 if LBMC_CLOCK_MODE_1_1
default 1 if LBMC_CLOCK_MODE_1_2
config DDR_MC_CLOCK_MODE
int
default 1 if DDR_MC_CLOCK_MODE_1_2
default 0 if DDR_MC_CLOCK_MODE_1_1
config SYSTEM_PLL_VCO_DIV
int
default 0 if ARCH_MPC8349 || ARCH_MPC832X
default 2 if ARCH_MPC8313
default 0 if SYSTEM_PLL_VCO_DIV_2 && !ARCH_MPC8360 && !ARCH_MPC837X
default 1 if SYSTEM_PLL_VCO_DIV_4 && !ARCH_MPC8360 && !ARCH_MPC837X
default 2 if SYSTEM_PLL_VCO_DIV_8 && !ARCH_MPC8360 && !ARCH_MPC837X
default 0 if SYSTEM_PLL_VCO_DIV_4 && (ARCH_MPC8360 || ARCH_MPC837X)
default 1 if SYSTEM_PLL_VCO_DIV_8 && (ARCH_MPC8360 || ARCH_MPC837X)
default 2 if SYSTEM_PLL_VCO_DIV_2 && (ARCH_MPC8360 || ARCH_MPC837X)
default 3 if SYSTEM_PLL_VCO_DIV_1
config SYSTEM_PLL_FACTOR
int
default 2 if SYSTEM_PLL_FACTOR_2_1
default 3 if SYSTEM_PLL_FACTOR_3_1
default 4 if SYSTEM_PLL_FACTOR_4_1
default 5 if SYSTEM_PLL_FACTOR_5_1
default 6 if SYSTEM_PLL_FACTOR_6_1
default 7 if SYSTEM_PLL_FACTOR_7_1
default 8 if SYSTEM_PLL_FACTOR_8_1
default 9 if SYSTEM_PLL_FACTOR_9_1
default 10 if SYSTEM_PLL_FACTOR_10_1
default 11 if SYSTEM_PLL_FACTOR_11_1
default 12 if SYSTEM_PLL_FACTOR_12_1
default 13 if SYSTEM_PLL_FACTOR_13_1
default 14 if SYSTEM_PLL_FACTOR_14_1
default 15 if SYSTEM_PLL_FACTOR_15_1
default 0 if SYSTEM_PLL_FACTOR_16_1
config CORE_PLL_RATIO
hex
default 0x0 if CORE_PLL_BYPASS
default 0x02 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_2
default 0x22 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_4
default 0x42 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_8
default 0x03 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_2
default 0x23 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_4
default 0x43 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_8
default 0x04 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_2
default 0x24 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_4
default 0x44 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_8
default 0x05 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_2
default 0x25 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_4
default 0x45 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_8
default 0x06 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_2
default 0x26 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_4
default 0x46 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_8
config CORE_DISABLE_MODE
int
default 0 if CORE_DISABLE_MODE_OFF
default 1 if CORE_DISABLE_MODE_ON
config BOOT_MEMORY_SPACE
int
default 0 if BOOT_MEMORY_SPACE_LOW
default 1 if BOOT_MEMORY_SPACE_HIGH
config BOOT_SEQUENCER
int
default 0 if BOOT_SEQUENCER_DISABLED
default 1 if BOOT_SEQUENCER_NORMAL_I2C
default 2 if BOOT_SEQUENCER_EXTENDED_I2C
config SOFTWARE_WATCHDOG
int
default 0 if SOFTWARE_WATCHDOG_DISABLED
default 1 if SOFTWARE_WATCHDOG_ENABLED
config BOOT_ROM_INTERFACE
hex
default 0x0 if BOOT_ROM_INTERFACE_DDR_SDRAM
default 0x4 if BOOT_ROM_INTERFACE_PCI1
default 0x8 if BOOT_ROM_INTERFACE_PCI2
default 0x8 if BOOT_ROM_INTERFACE_ESDHC
default 0xc if BOOT_ROM_INTERFACE_SPI
default 0xc if BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
default 0x14 if BOOT_ROM_INTERFACE_GPCM_8BIT
default 0x18 if BOOT_ROM_INTERFACE_GPCM_16BIT
default 0x1c if BOOT_ROM_INTERFACE_GPCM_32BIT
default 0x5 if BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL
default 0x15 if BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE
config TSEC1_MODE
hex
default 0x0 if !MPC83XX_TSEC1_SUPPORT
default 0x0 if TSEC1_MODE_MII
default 0x1 if TSEC1_MODE_RMII
default 0x3 if TSEC1_MODE_RGMII && !ARCH_MPC8349
default 0x5 if TSEC1_MODE_RTBI && !ARCH_MPC8349
default 0x6 if TSEC1_MODE_SGMII
default 0x0 if TSEC1_MODE_RGMII && ARCH_MPC8349
default 0x1 if TSEC1_MODE_RTBI && ARCH_MPC8349
default 0x2 if TSEC1_MODE_GMII
default 0x3 if TSEC1_MODE_TBI
config TSEC2_MODE
hex
default 0x0 if !MPC83XX_TSEC2_SUPPORT
default 0x0 if TSEC2_MODE_MII
default 0x1 if TSEC2_MODE_RMII
default 0x3 if TSEC2_MODE_RGMII && !ARCH_MPC8349
default 0x5 if TSEC2_MODE_RTBI && !ARCH_MPC8349
default 0x6 if TSEC2_MODE_SGMII
default 0x0 if TSEC2_MODE_RGMII && ARCH_MPC8349
default 0x1 if TSEC2_MODE_RTBI && ARCH_MPC8349
default 0x2 if TSEC2_MODE_GMII
default 0x3 if TSEC2_MODE_TBI
config SECONDARY_DDR_IO
int
default 0 if !ARCH_MPC8360
default 0 if SECONDARY_DDR_IO_DISABLE
default 1 if SECONDARY_DDR_IO_ENABLE
config TRUE_LITTLE_ENDIAN
int
default 0 if TRUE_LITTLE_ENDIAN_BIG_ENDIAN
default 1 if TRUE_LITTLE_ENDIAN_LITTLE_ENDIAN
config LALE_TIMING
int
default 0 if ARCH_MPC830X || ARCH_MPC837X
default 0 if LALE_TIMING_NORMAL
default 1 if LALE_TIMING_EARLIER
config LDP_PIN_MUX_STATE
int
default 0 if !MPC83XX_LDP_PIN
default 0 if LDP_PIN_MUX_STATE_1
default 1 if LDP_PIN_MUX_STATE_0
config QUICC_VCO_DIVIDER
int
default 0 if !MPC83XX_QUICC_ENGINE
default 0 if QUICC_VCO_DIVIDER_2 && ARCH_MPC8309
default 1 if QUICC_VCO_DIVIDER_4 && ARCH_MPC8309
default 2 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8309
default 2 if QUICC_VCO_DIVIDER_2 && (ARCH_MPC832X || ARCH_MPC8360)
default 0 if QUICC_VCO_DIVIDER_4 && (ARCH_MPC832X || ARCH_MPC8360)
default 1 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8360
config QUICC_DIV_FACTOR
int
default 0 if !MPC83XX_QUICC_ENGINE
default 0 if QUICC_DIV_FACTOR_1
default 1 if QUICC_DIV_FACTOR_2
config QUICC_MULT_FACTOR
int
default 0 if !MPC83XX_QUICC_ENGINE
default 2 if QUICC_MULT_FACTOR_2
default 3 if QUICC_MULT_FACTOR_3
default 4 if QUICC_MULT_FACTOR_4
default 5 if QUICC_MULT_FACTOR_5
default 6 if QUICC_MULT_FACTOR_6
default 7 if QUICC_MULT_FACTOR_7
default 8 if QUICC_MULT_FACTOR_8
default 9 if QUICC_MULT_FACTOR_9
default 10 if QUICC_MULT_FACTOR_10
default 11 if QUICC_MULT_FACTOR_11
default 12 if QUICC_MULT_FACTOR_12
default 13 if QUICC_MULT_FACTOR_13
default 14 if QUICC_MULT_FACTOR_14
default 15 if QUICC_MULT_FACTOR_15
default 16 if QUICC_MULT_FACTOR_16
default 17 if QUICC_MULT_FACTOR_17
default 18 if QUICC_MULT_FACTOR_18
default 19 if QUICC_MULT_FACTOR_19
default 20 if QUICC_MULT_FACTOR_20
default 21 if QUICC_MULT_FACTOR_21
default 22 if QUICC_MULT_FACTOR_22
default 23 if QUICC_MULT_FACTOR_23
default 24 if QUICC_MULT_FACTOR_24
default 25 if QUICC_MULT_FACTOR_25
default 26 if QUICC_MULT_FACTOR_26
default 27 if QUICC_MULT_FACTOR_27
default 28 if QUICC_MULT_FACTOR_28
default 29 if QUICC_MULT_FACTOR_29
default 30 if QUICC_MULT_FACTOR_30
default 31 if QUICC_MULT_FACTOR_31
config PCI_HOST_MODE
int
default 0 if !MPC83XX_PCI_SUPPORT && !ARCH_MPC8308
default 0 if PCI_HOST_MODE_DISABLE
default 1 if PCI_HOST_MODE_ENABLE || ARCH_MPC8308 # MPC8308 needs this bit set regardless
config PCI_64BIT_MODE
int
default 0 if !ARCH_MPC8349
default 0 if PCI_64BIT_MODE_DISABLE
default 1 if PCI_64BIT_MODE_ENABLE
config PCI_INT_ARBITER1
int
default 0 if !MPC83XX_PCI_SUPPORT && !ARCH_MPC8308
default 0 if PCI_INT_ARBITER1_DISABLE
default 1 if PCI_INT_ARBITER1_ENABLE || ARCH_MPC8308 # MPC8308 needs this bit set regardless
config PCI_INT_ARBITER2
int
default 0 if !ARCH_MPC8349
default 0 if PCI_INT_ARBITER2_DISABLE
default 1 if PCI_INT_ARBITER2_ENABLE
config PCI_CLOCK_OUTPUT_DRIVE
int
default 0 if !ARCH_MPC8360
default 0 if PCI_CLOCK_OUTPUT_DRIVE_DISABLE
default 1 if PCI_CLOCK_OUTPUT_DRIVE_ENABLE