u-boot/configs/odroid-go2_defconfig
Patrick Delaunay 51827f9a8b lib: optee: remove the duplicate CONFIG_OPTEE
The configuration CONFIG_OPTEE is defined 2 times:
1- in lib/optee/Kconfig for support of OPTEE images loaded by bootm command
2- in drivers/tee/optee/Kconfig for support of OP-TEE driver.

It is abnormal to have the same CONFIG define for 2 purpose;
and it is difficult to managed correctly their dependencies.

Moreover CONFIG_SPL_OPTEE is defined in common/spl/Kconfig
to manage OPTEE image load in SPL.

This definition causes an issue with the macro CONFIG_IS_ENABLED(OPTEE)
to test the availability of the OP-TEE driver.

This patch cleans the configuration dependency with:
- CONFIG_OPTEE_IMAGE (renamed) => support of OP-TEE image in U-Boot
- CONFIG_SPL_OPTEE_IMAGE (renamed) => support of OP-TEE image in SPL
- CONFIG_OPTEE (same) => support of OP-TEE driver in U-Boot
- CONFIG_OPTEE_LIB (new) => support of OP-TEE library

After this patch, the macro have the correct behavior:
- CONFIG_IS_ENABLED(OPTEE_IMAGE) => Load of OP-TEE image is supported
- CONFIG_IS_ENABLED(OPTEE) => OP-TEE driver is supported

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-05 08:44:48 -04:00

114 lines
2.9 KiB
Text

CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x4000
CONFIG_DEFAULT_DEVICE_TREE="rk3326-odroid-go2"
CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_ROCKCHIP_PX30=y
CONFIG_TARGET_ODROID_GO2=y
CONFIG_DEBUG_UART_CHANNEL=1
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_DEBUG_UART_BASE=0xFF160000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3326-odroid-go2.dtb"
# CONFIG_CONSOLE_MUX is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
# CONFIG_TPL_BANNER_PRINT is not set
CONFIG_SPL_CRC32=y
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_ATF=y
# CONFIG_TPL_FRAMEWORK is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_LZMADEC is not set
# CONFIG_CMD_UNZIP is not set
CONFIG_CMD_GPT=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SLEEP is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_ISO_PARTITION is not set
CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_BUF_SIZE=0x04000000
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_ROCKCHIP_OTP=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_TPL_RAM=y
CONFIG_ROCKCHIP_SDRAM_COMMON=y
CONFIG_DM_RESET=y
# CONFIG_SPECIFY_CONSOLE_INDEX is not set
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_SOUND=y
CONFIG_SYSRESET=y
CONFIG_OPTEE_LIB=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_LCD=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y
CONFIG_LZO=y
CONFIG_ERRNO_STR=y