mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
31d8267224
Change all code that conditionally operates on high bat registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS instead of the myriad ways this is done now. Define the option for every config for which high bats are supported (and enabled by early boot, on parts where they're not always enabled) Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
306 lines
8.4 KiB
C
306 lines
8.4 KiB
C
/*
|
|
* (C) Copyright 2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
|
#define CONFIG_MPC5200
|
|
#define CONFIG_O2DNT 1 /* ... on O2DNT board */
|
|
|
|
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
|
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 5 /* console is on PSC5 */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*
|
|
* PCI Mapping:
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
*/
|
|
#define CONFIG_PCI 1
|
|
#define CONFIG_PCI_PNP 1
|
|
/* #define CONFIG_PCI_SCAN_SHOW 1 */
|
|
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
|
|
#define CFG_XLB_PIPELINING 1
|
|
|
|
#define CONFIG_NET_MULTI 1
|
|
#define CONFIG_EEPRO100
|
|
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
|
#define CONFIG_NS8382X 1
|
|
|
|
/* Partitions */
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_ISO_PARTITION
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_PCI
|
|
|
|
|
|
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
|
|
# define CFG_LOWBOOT 1
|
|
#else
|
|
# error "TEXT_BASE must be 0xFF000000"
|
|
#endif
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"flash_nfs=run nfsargs addip;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"flash_self=run ramargs addip;" \
|
|
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
|
|
"rootpath=/opt/eldk/ppc_82xx\0" \
|
|
"bootfile=/tftpboot/MPC5200/uImage\0" \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run flash_self"
|
|
|
|
#if defined(CONFIG_MPC5200)
|
|
/*
|
|
* IPB Bus clocking configuration.
|
|
*/
|
|
#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
|
|
#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
|
|
/*
|
|
* PCI Bus clocking configuration
|
|
*
|
|
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
|
|
* CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
|
|
* of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
|
|
*/
|
|
#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* I2C configuration
|
|
*/
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */
|
|
|
|
#define CFG_I2C_SPEED 100000 /* 100 kHz */
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
|
|
/*
|
|
* EEPROM configuration:
|
|
*
|
|
* O2DNT board is equiped with Ramtron FRAM device FM24CL16
|
|
* 16 Kib Ferroelectric Nonvolatile serial RAM memory
|
|
* organized as 2048 x 8 bits and addressable as eight I2C devices
|
|
* 0x50 ... 0x57 each 256 bytes in size
|
|
*
|
|
*/
|
|
#define CFG_I2C_FRAM
|
|
#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 3
|
|
/*
|
|
* There is no write delay with FRAM, write operations are performed at bus
|
|
* speed. Thus, no status polling or write delay is needed.
|
|
*/
|
|
/*#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70*/
|
|
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
#define CFG_FLASH_BASE 0xFF000000
|
|
#define CFG_FLASH_SIZE 0x01000000
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000)
|
|
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
|
|
#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
|
|
#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_SIZE 0x20000
|
|
#define CFG_ENV_SECT_SIZE 0x20000
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CFG_MBAR 0xF0000000
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_DEFAULT_MBAR 0x80000000
|
|
|
|
/* Use SRAM until RAM will be available */
|
|
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
|
|
|
|
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
/*
|
|
* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
|
|
*/
|
|
/* #define CONFIG_FEC_10MBIT 1 */
|
|
#define CONFIG_PHY_ADDR 0x00
|
|
|
|
/*
|
|
* GPIO configuration
|
|
*/
|
|
/*#define CFG_GPS_PORT_CONFIG 0x10002004 */
|
|
#define CFG_GPS_PORT_CONFIG 0x00002006 /* no CAN */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#if defined(CONFIG_MPC5200)
|
|
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CFG_HID0_FINAL HID0_ICE
|
|
#else
|
|
#define CFG_HID0_INIT 0
|
|
#define CFG_HID0_FINAL 0
|
|
#endif
|
|
|
|
#define CFG_BOOTCS_START CFG_FLASH_BASE
|
|
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
|
|
|
|
#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
|
|
/*
|
|
* For 66 MHz PCI clock additional Wait State is needed for CS0 (flash).
|
|
*/
|
|
#define CFG_BOOTCS_CFG 0x00057801 /* for pci_clk = 66 MHz */
|
|
#else
|
|
#define CFG_BOOTCS_CFG 0x00047801 /* for pci_clk = 33 MHz */
|
|
#endif
|
|
|
|
#define CFG_CS0_START CFG_FLASH_BASE
|
|
#define CFG_CS0_SIZE CFG_FLASH_SIZE
|
|
|
|
#define CFG_CS_BURST 0x00000000
|
|
#define CFG_CS_DEADCYCLE 0x33333333
|
|
|
|
#define CFG_RESET_ADDRESS 0xff000000
|
|
|
|
#endif /* __CONFIG_H */
|