u-boot/board/renesas/salvator-x/salvator-x.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

138 lines
3.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* board/renesas/salvator-x/salvator-x.c
* This file is Salvator-X/Salvator-XS board support.
*
* Copyright (C) 2015-2017 Renesas Electronics Corporation
* Copyright (C) 2015 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*/
#include <common.h>
#include <malloc.h>
#include <netdev.h>
#include <dm.h>
#include <dm/platform_data/serial_sh.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#include <asm/arch/rmobile.h>
#include <asm/arch/rcar-mstp.h>
#include <asm/arch/sh_sdhi.h>
#include <i2c.h>
#include <mmc.h>
DECLARE_GLOBAL_DATA_PTR;
#define CPGWPCR 0xE6150904
#define CPGWPR 0xE615090C
#define CLK2MHZ(clk) (clk / 1000 / 1000)
void s_init(void)
{
struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
/* Watchdog init */
writel(0xA5A5A500, &rwdt->rwtcsra);
writel(0xA5A5A500, &swdt->swtcsra);
writel(0xA5A50000, CPGWPCR);
writel(0xFFFFFFFF, CPGWPR);
}
#define GSX_MSTP112 BIT(12) /* 3DG */
#define TMU0_MSTP125 BIT(25) /* secure */
#define TMU1_MSTP124 BIT(24) /* non-secure */
#define SCIF2_MSTP310 BIT(10) /* SCIF2 */
#define DVFS_MSTP926 BIT(26)
#define HSUSB_MSTP704 BIT(4) /* HSUSB */
int board_early_init_f(void)
{
/* TMU0,1 */ /* which use ? */
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124);
#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
/* DVFS for reset */
mstp_clrbits_le32(MSTPSR9, SMSTPCR9, DVFS_MSTP926);
#endif
return 0;
}
/* SYSC */
/* R/- 32 Power status register 2(3DG) */
#define SYSC_PWRSR2 0xE6180100
/* -/W 32 Power resume control register 2 (3DG) */
#define SYSC_PWRONCR2 0xE618010C
/* HSUSB block registers */
#define HSUSB_REG_LPSTS 0xE6590102
#define HSUSB_REG_LPSTS_SUSPM_NORMAL BIT(14)
#define HSUSB_REG_UGCTRL2 0xE6590184
#define HSUSB_REG_UGCTRL2_USB0SEL 0x30
#define HSUSB_REG_UGCTRL2_USB0SEL_EHCI 0x10
int board_init(void)
{
u32 cpu_type = rmobile_get_cpu_type();
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
if (cpu_type == RMOBILE_CPU_TYPE_R8A7795) {
/* GSX: force power and clock supply */
writel(0x0000001F, SYSC_PWRONCR2);
while (readl(SYSC_PWRSR2) != 0x000003E0)
mdelay(20);
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, GSX_MSTP112);
}
/* USB1 pull-up */
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
/* Configure the HSUSB block */
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, HSUSB_MSTP704);
/* Choice USB0SEL */
clrsetbits_le32(HSUSB_REG_UGCTRL2, HSUSB_REG_UGCTRL2_USB0SEL,
HSUSB_REG_UGCTRL2_USB0SEL_EHCI);
/* low power status */
setbits_le16(HSUSB_REG_LPSTS, HSUSB_REG_LPSTS_SUSPM_NORMAL);
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_memory_size() != 0)
return -EINVAL;
return 0;
}
int dram_init_banksize(void)
{
fdtdec_setup_memory_banksize();
return 0;
}
#define RST_BASE 0xE6160000
#define RST_CA57RESCNT (RST_BASE + 0x40)
#define RST_CA53RESCNT (RST_BASE + 0x44)
#define RST_RSTOUTCR (RST_BASE + 0x58)
#define RST_CODE 0xA5A5000F
void reset_cpu(ulong addr)
{
#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
i2c_reg_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x20, 0x80);
#else
/* only CA57 ? */
writel(RST_CODE, RST_CA57RESCNT);
#endif
}