u-boot/arch/arm/include/asm/arch-am33xx/spl.h
Stefan Roese e49631afa0 arm: am33xx: Handle NAND+I2C boot-device the same way as NAND
Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
Otherwise the SPL boot IF can't handle this device correctly.
Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
Draco leads to this boot-device passed to SPL from the BootROM.

With this change, Draco boots just fine into main U-Boot.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Roger Meier <r.meier@siemens.com>
Cc: Samuel Egli <samuel.egli@siemens.com>
2014-12-04 21:28:31 -05:00

57 lines
1.5 KiB
C

/*
* (C) Copyright 2012
* Texas Instruments, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_ARCH_SPL_H_
#define _ASM_ARCH_SPL_H_
#if defined(CONFIG_TI816X)
#define BOOT_DEVICE_XIP 2
#define BOOT_DEVICE_NAND 3
#define BOOT_DEVICE_MMC1 6
#define BOOT_DEVICE_MMC2 5
#define BOOT_DEVICE_UART 0x43
#elif defined(CONFIG_AM43XX)
#define BOOT_DEVICE_NOR 1
#define BOOT_DEVICE_NAND 5
#define BOOT_DEVICE_MMC1 7
#define BOOT_DEVICE_MMC2 8
#define BOOT_DEVICE_SPI 10
#define BOOT_DEVICE_USB 13
#define BOOT_DEVICE_UART 65
#define BOOT_DEVICE_CPGMAC 71
#else
#define BOOT_DEVICE_XIP 2
#define BOOT_DEVICE_NAND 5
#define BOOT_DEVICE_NAND_I2C 6
#if defined(CONFIG_AM33XX)
#define BOOT_DEVICE_MMC1 8
#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
#elif defined(CONFIG_TI814X)
#define BOOT_DEVICE_MMC1 9
#define BOOT_DEVICE_MMC2 8 /* ROM only supports 2nd instance */
#endif
#define BOOT_DEVICE_SPI 11
#define BOOT_DEVICE_UART 65
#define BOOT_DEVICE_USBETH 68
#define BOOT_DEVICE_CPGMAC 70
#endif
#define BOOT_DEVICE_MMC2_2 0xFF
#if defined(CONFIG_AM33XX)
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2
#elif defined(CONFIG_AM43XX)
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#ifdef CONFIG_SPL_USB_SUPPORT
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB
#else
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2
#endif
#elif defined(CONFIG_TI81XX)
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1
#endif
#endif