u-boot/board/freescale/common/arm_sleep.c
tang yuantian 0210a36988 arm: ls1021atwr: optimize the deep sleep latency
It will take more than 1s when wake up from deep sleep. Most of the
time is spent on outputing information. This patch reduced the deep
sleep latency by:
1. avoid outputing system informaton
2. remove flush cache after DDR restore
3. skip reloading second stage uboot binary when SD boot

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-30 09:19:48 -07:00

97 lines
1.9 KiB
C

/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#ifndef CONFIG_ARMV7_NONSEC
#error " Deep sleep needs non-secure mode support. "
#else
#include <asm/secure.h>
#endif
#include <asm/armv7.h>
#if defined(CONFIG_LS102XA)
#include <asm/arch/immap_ls102xa.h>
#endif
#include "sleep.h"
#ifdef CONFIG_U_QE
#include "../../../drivers/qe/qe.h"
#endif
DECLARE_GLOBAL_DATA_PTR;
void __weak board_mem_sleep_setup(void)
{
}
void __weak board_sleep_prepare(void)
{
}
bool is_warm_boot(void)
{
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
return 1;
return 0;
}
void fsl_dp_disable_console(void)
{
gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
}
/*
* When wakeup from deep sleep, the first 128 bytes space
* will be used to do DDR training which corrupts the data
* in there. This function will restore them.
*/
static void dp_ddr_restore(void)
{
u64 *src, *dst;
int i;
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
/* get the address of ddr date from SPARECR3 */
src = (u64 *)in_le32(&scfg->sparecr[2]);
dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
for (i = 0; i < DDR_BUFF_LEN / 8; i++)
*dst++ = *src++;
}
static void dp_resume_prepare(void)
{
dp_ddr_restore();
board_sleep_prepare();
armv7_init_nonsec();
#ifdef CONFIG_U_QE
u_qe_resume();
#endif
}
int fsl_dp_resume(void)
{
u32 start_addr;
void (*kernel_resume)(void);
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
if (!is_warm_boot())
return 0;
dp_resume_prepare();
/* Get the entry address and jump to kernel */
start_addr = in_le32(&scfg->sparecr[1]);
debug("Entry address is 0x%08x\n", start_addr);
kernel_resume = (void (*)(void))start_addr;
secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
return 0;
}