u-boot/arch/arm/include/asm/arch-mx35/imx-regs.h
Stefano Babic ac87c17d34 SPI: mxc_spi: replace fixed offsets with structures
This patch cleans driver code replacing all accesses
to registers with fixed offsets with a corresponding
structure.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-02-02 00:54:43 +01:00

303 lines
7.5 KiB
C

/*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MX35_H
#define __ASM_ARCH_MX35_H
/*
* IRAM
*/
#define IRAM_BASE_ADDR 0x10000000 /* internal ram */
#define IRAM_SIZE 0x00020000 /* 128 KB */
/*
* AIPS 1
*/
#define AIPS1_BASE_ADDR 0x43F00000
#define AIPS1_CTRL_BASE_ADDR AIPS1_BASE_ADDR
#define MAX_BASE_ADDR 0x43F04000
#define EVTMON_BASE_ADDR 0x43F08000
#define CLKCTL_BASE_ADDR 0x43F0C000
#define I2C_BASE_ADDR 0x43F80000
#define I2C3_BASE_ADDR 0x43F84000
#define ATA_BASE_ADDR 0x43F8C000
#define UART1_BASE_ADDR 0x43F90000
#define UART2_BASE_ADDR 0x43F94000
#define I2C2_BASE_ADDR 0x43F98000
#define CSPI1_BASE_ADDR 0x43FA4000
#define IOMUXC_BASE_ADDR 0x43FAC000
/*
* SPBA
*/
#define SPBA_BASE_ADDR 0x50000000
#define UART3_BASE_ADDR 0x5000C000
#define CSPI2_BASE_ADDR 0x50010000
#define ATA_DMA_BASE_ADDR 0x50020000
#define FEC_BASE_ADDR 0x50038000
#define SPBA_CTRL_BASE_ADDR 0x5003C000
/*
* AIPS 2
*/
#define AIPS2_BASE_ADDR 0x53F00000
#define AIPS2_CTRL_BASE_ADDR AIPS2_BASE_ADDR
#define CCM_BASE_ADDR 0x53F80000
#define GPT1_BASE_ADDR 0x53F90000
#define EPIT1_BASE_ADDR 0x53F94000
#define EPIT2_BASE_ADDR 0x53F98000
#define GPIO3_BASE_ADDR 0x53FA4000
#define MMC_SDHC1_BASE_ADDR 0x53FB4000
#define MMC_SDHC2_BASE_ADDR 0x53FB8000
#define MMC_SDHC3_BASE_ADDR 0x53FBC000
#define IPU_CTRL_BASE_ADDR 0x53FC0000
#define GPIO3_BASE_ADDR 0x53FA4000
#define GPIO1_BASE_ADDR 0x53FCC000
#define GPIO2_BASE_ADDR 0x53FD0000
#define SDMA_BASE_ADDR 0x53FD4000
#define RTC_BASE_ADDR 0x53FD8000
#define WDOG_BASE_ADDR 0x53FDC000
#define PWM_BASE_ADDR 0x53FE0000
#define RTIC_BASE_ADDR 0x53FEC000
#define IIM_BASE_ADDR 0x53FF0000
#define IMX_CCM_BASE CCM_BASE_ADDR
/*
* ROMPATCH and AVIC
*/
#define ROMPATCH_BASE_ADDR 0x60000000
#define AVIC_BASE_ADDR 0x68000000
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define EXT_MEM_CTRL_BASE 0xB8000000
#define ESDCTL_BASE_ADDR 0xB8001000
#define WEIM_BASE_ADDR 0xB8002000
#define WEIM_CTRL_CS0 WEIM_BASE_ADDR
#define WEIM_CTRL_CS1 (WEIM_BASE_ADDR + 0x10)
#define WEIM_CTRL_CS2 (WEIM_BASE_ADDR + 0x20)
#define WEIM_CTRL_CS3 (WEIM_BASE_ADDR + 0x30)
#define WEIM_CTRL_CS4 (WEIM_BASE_ADDR + 0x40)
#define WEIM_CTRL_CS5 (WEIM_BASE_ADDR + 0x50)
#define M3IF_BASE_ADDR 0xB8003000
#define EMI_BASE_ADDR 0xB8004000
#define NFC_BASE_ADDR 0xBB000000
/*
* Memory regions and CS
*/
#define IPU_MEM_BASE_ADDR 0x70000000
#define CSD0_BASE_ADDR 0x80000000
#define CSD1_BASE_ADDR 0x90000000
#define CS0_BASE_ADDR 0xA0000000
#define CS1_BASE_ADDR 0xA8000000
#define CS2_BASE_ADDR 0xB0000000
#define CS3_BASE_ADDR 0xB2000000
#define CS4_BASE_ADDR 0xB4000000
#define CS5_BASE_ADDR 0xB6000000
/*
* IRQ Controller Register Definitions.
*/
#define AVIC_NIMASK 0x04
#define AVIC_INTTYPEH 0x18
#define AVIC_INTTYPEL 0x1C
/* L210 */
#define L2CC_BASE_ADDR 0x30000000
#define L2_CACHE_LINE_SIZE 32
#define L2_CACHE_CTL_REG 0x100
#define L2_CACHE_AUX_CTL_REG 0x104
#define L2_CACHE_SYNC_REG 0x730
#define L2_CACHE_INV_LINE_REG 0x770
#define L2_CACHE_INV_WAY_REG 0x77C
#define L2_CACHE_CLEAN_LINE_REG 0x7B0
#define L2_CACHE_CLEAN_INV_LINE_REG 0x7F0
#define L2_CACHE_DBG_CTL_REG 0xF40
#define CLKMODE_AUTO 0
#define CLKMODE_CONSUMER 1
#define PLL_PD(x) (((x) & 0xf) << 26)
#define PLL_MFD(x) (((x) & 0x3ff) << 16)
#define PLL_MFI(x) (((x) & 0xf) << 10)
#define PLL_MFN(x) (((x) & 0x3ff) << 0)
#define CSCR_U(x) (WEIM_CTRL_CS#x + 0)
#define CSCR_L(x) (WEIM_CTRL_CS#x + 4)
#define CSCR_A(x) (WEIM_CTRL_CS#x + 8)
#define IIM_SREV 0x24
#define ROMPATCH_REV 0x40
#define IPU_CONF IPU_CTRL_BASE_ADDR
#define IPU_CONF_PXL_ENDIAN (1<<8)
#define IPU_CONF_DU_EN (1<<7)
#define IPU_CONF_DI_EN (1<<6)
#define IPU_CONF_ADC_EN (1<<5)
#define IPU_CONF_SDC_EN (1<<4)
#define IPU_CONF_PF_EN (1<<3)
#define IPU_CONF_ROT_EN (1<<2)
#define IPU_CONF_IC_EN (1<<1)
#define IPU_CONF_SCI_EN (1<<0)
#define GPIO_PORT_NUM 3
#define GPIO_NUM_PIN 32
#define CHIP_REV_1_0 0x10
#define CHIP_REV_2_0 0x20
#define BOARD_REV_1_0 0x0
#define BOARD_REV_2_0 0x1
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
extern void imx_get_mac_from_fuse(unsigned char *mac);
enum mxc_main_clocks {
CPU_CLK,
AHB_CLK,
IPG_CLK,
IPG_PER_CLK,
NFC_CLK,
USB_CLK,
HSP_CLK,
};
enum mxc_peri_clocks {
UART1_BAUD,
UART2_BAUD,
UART3_BAUD,
SSI1_BAUD,
SSI2_BAUD,
CSI_BAUD,
MSHC_CLK,
ESDHC1_CLK,
ESDHC2_CLK,
ESDHC3_CLK,
SPDIF_CLK,
SPI1_CLK,
SPI2_CLK,
};
/* Clock Control Module (CCM) registers */
struct ccm_regs {
u32 ccmr; /* Control */
u32 pdr0; /* Post divider 0 */
u32 pdr1; /* Post divider 1 */
u32 pdr2; /* Post divider 2 */
u32 pdr3; /* Post divider 3 */
u32 pdr4; /* Post divider 4 */
u32 rcsr; /* CCM Status */
u32 mpctl; /* Core PLL Control */
u32 ppctl; /* Peripheral PLL Control */
u32 acmr; /* Audio clock mux */
u32 cosr; /* Clock out source */
u32 cgr0; /* Clock Gating Control 0 */
u32 cgr1; /* Clock Gating Control 1 */
u32 cgr2; /* Clock Gating Control 2 */
u32 cgr3; /* Clock Gating Control 3 */
u32 reserved;
u32 dcvr0; /* DPTC Comparator 0 */
u32 dcvr1; /* DPTC Comparator 0 */
u32 dcvr2; /* DPTC Comparator 0 */
u32 dcvr3; /* DPTC Comparator 0 */
u32 ltr0; /* Load Tracking 0 */
u32 ltr1; /* Load Tracking 1 */
u32 ltr2; /* Load Tracking 2 */
u32 ltr3; /* Load Tracking 3 */
u32 ltbr0; /* Load Tracking Buffer 0 */
};
/* IIM control registers */
struct iim_regs {
u32 iim_stat;
u32 iim_statm;
u32 iim_err;
u32 iim_emask;
u32 iim_fctl;
u32 iim_ua;
u32 iim_la;
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
u32 iim_prog_p;
u32 iim_scs0;
u32 iim_scs1;
u32 iim_scs2;
u32 iim_scs3;
};
/* General Purpose Timer (GPT) registers */
struct gpt_regs {
u32 ctrl; /* control */
u32 pre; /* prescaler */
u32 stat; /* status */
u32 intr; /* interrupt */
u32 cmp[3]; /* output compare 1-3 */
u32 capt[2]; /* input capture 1-2 */
u32 counter; /* counter */
};
/* CSPI registers */
struct cspi_regs {
u32 rxdata;
u32 txdata;
u32 ctrl;
u32 intr;
u32 dma;
u32 stat;
u32 period;
u32 test;
};
/* Watchdog Timer (WDOG) registers */
struct wdog_regs {
u16 wcr; /* Control */
u16 wsr; /* Service */
u16 wrsr; /* Reset Status */
u16 wicr; /* Interrupt Control */
u16 wmcr; /* Misc Control */
};
/*
* NFMS bit in RCSR register for pagesize of nandflash
*/
#define NFMS_BIT 8
#define NFMS_NF_DWIDTH 14
#define NFMS_NF_PG_SZ 8
#define CCM_RCSR_NF_16BIT_SEL (1 << 14)
extern unsigned int get_board_rev(void);
extern int is_soc_rev(int rev);
extern int sdhc_init(void);
#endif
#endif /* __ASM_ARCH_MX35_H */