mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-18 01:03:05 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
104 lines
2.7 KiB
C
104 lines
2.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
|
|
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
|
|
|
|
#define MII_MARVELL_PHY_PAGE 22
|
|
|
|
#define MV88E1116_LED_FCTRL_REG 10
|
|
#define MV88E1116_CPRSP_CR3_REG 21
|
|
#define MV88E1116_MAC_CTRL_REG 21
|
|
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
|
|
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
|
|
|
|
void mv_phy_88e1116_init(const char *name, u16 phyaddr)
|
|
{
|
|
u16 reg;
|
|
|
|
if (miiphy_set_current_dev(name))
|
|
return;
|
|
|
|
/*
|
|
* Enable RGMII delay on Tx and Rx for CPU port
|
|
* Ref: sec 4.7.2 of chip datasheet
|
|
*/
|
|
miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 2);
|
|
miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®);
|
|
reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
|
|
miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
|
|
miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 0);
|
|
|
|
if (miiphy_reset(name, phyaddr) == 0)
|
|
printf("88E1116 Initialized on %s\n", name);
|
|
}
|
|
|
|
void mv_phy_88e1318_init(const char *name, u16 phyaddr)
|
|
{
|
|
u16 reg;
|
|
|
|
if (miiphy_set_current_dev(name))
|
|
return;
|
|
|
|
/*
|
|
* Set control mode 4 for LED[0].
|
|
*/
|
|
miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3);
|
|
miiphy_read(name, phyaddr, 16, ®);
|
|
reg |= 0xf;
|
|
miiphy_write(name, phyaddr, 16, reg);
|
|
|
|
/*
|
|
* Enable RGMII delay on Tx and Rx for CPU port
|
|
* Ref: sec 4.7.2 of chip datasheet
|
|
*/
|
|
miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 2);
|
|
miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®);
|
|
reg |= (MV88E1116_RGMII_TXTM_CTRL | MV88E1116_RGMII_RXTM_CTRL);
|
|
miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
|
|
miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 0);
|
|
|
|
if (miiphy_reset(name, phyaddr) == 0)
|
|
printf("88E1318 Initialized on %s\n", name);
|
|
}
|
|
#endif /* CONFIG_CMD_NET && CONFIG_RESET_PHY_R */
|
|
|
|
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
|
|
int lacie_read_mac_address(uchar *mac_addr)
|
|
{
|
|
int ret;
|
|
ushort version;
|
|
|
|
/* I2C-0 for on-board EEPROM */
|
|
i2c_set_bus_num(0);
|
|
|
|
/* Check layout version for EEPROM data */
|
|
ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
|
|
CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
|
|
(uchar *) &version, 2);
|
|
if (ret != 0) {
|
|
printf("Error: failed to read I2C EEPROM @%02x\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR);
|
|
return ret;
|
|
}
|
|
version = be16_to_cpu(version);
|
|
if (version < 1 || version > 3) {
|
|
printf("Error: unknown version %d for EEPROM data\n",
|
|
version);
|
|
return -1;
|
|
}
|
|
|
|
/* Read Ethernet MAC address from EEPROM */
|
|
ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2,
|
|
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac_addr, 6);
|
|
if (ret != 0)
|
|
printf("Error: failed to read I2C EEPROM @%02x\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR);
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_EEPROM_ADDR */
|