u-boot/arch/arm/mach-imx/mxs/Kconfig
Lukasz Majewski 010e58d448 imx: Add support for i.MX28 based XEA board
This patch introduces support for i.MX28 based XEA board.

This board supports DM/DTS in U-Boot proper as well as DM aware drivers
in SPL (u-boot.sb) by using OF_PLATDATA.
More detailed information regarding usage of it can be found in
./board/liebherr/xea/README file.

U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)
Trying to boot from MMC1
MMC0: Command 8 timeout (status 0xf0344020)
mmc_load_image_raw_sector: mmc block read error

U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)

CPU:   Freescale i.MX28 rev1.2 at 454 MHz
BOOT:  SSP SPI #3, master, 3V3 NOR
Model: Liebherr (LWE) XEA i.MX28 Board
DRAM:  128 MiB
MMC:   MXS MMC: 0
Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2
eth0: ethernet@800f0000
Hit any key to stop autoboot:  0

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-01-07 10:26:56 +01:00

78 lines
1.2 KiB
Text

if ARCH_MX23
config MX23
bool
default y
choice
prompt "MX23 board select"
optional
config TARGET_MX23_OLINUXINO
bool "Support mx23_olinuxino"
select BOARD_EARLY_INIT_F
config TARGET_MX23EVK
bool "Support mx23evk"
select BOARD_EARLY_INIT_F
config TARGET_SANSA_FUZE_PLUS
bool "Support sansa_fuze_plus"
config TARGET_XFI3
bool "Support xfi3"
endchoice
config SYS_SOC
default "mxs"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/freescale/mx23evk/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/creative/xfi3/Kconfig"
endif
if ARCH_MX28
config MX28
bool
default y
choice
prompt "MX28 board select"
optional
config TARGET_APX4DEVKIT
bool "Support apx4devkit"
config TARGET_BG0900
bool "Support bg0900"
config TARGET_MX28EVK
bool "Support mx28evk"
select BOARD_EARLY_INIT_F
config TARGET_SC_SPS_1
bool "Support sc_sps_1"
config TARGET_TS4600
bool "Support TS4600"
config TARGET_XEA
bool "Support XEA"
endchoice
config SYS_SOC
default "mxs"
source "board/bluegiga/apx4devkit/Kconfig"
source "board/freescale/mx28evk/Kconfig"
source "board/liebherr/xea/Kconfig"
source "board/ppcag/bg0900/Kconfig"
source "board/schulercontrol/sc_sps_1/Kconfig"
source "board/technologic/ts4600/Kconfig"
endif