mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 12:03:39 +00:00
e37ac717d7
Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
278 lines
7.8 KiB
C
278 lines
7.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2015
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
|
*/
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc_imx.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <linux/fb.h>
|
|
#include <ipu_pixfmt.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <pwm.h>
|
|
|
|
struct i2c_pads_info i2c_pad_info3 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
|
|
.gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
|
|
.gp = IMX_GPIO_NR(3, 17)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
|
|
.gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
|
|
.gp = IMX_GPIO_NR(3, 18)
|
|
}
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart1_pads[] = {
|
|
MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const uart5_pads[] = {
|
|
MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const gpio_pads[] = {
|
|
/* LED enable */
|
|
MX6_PAD_SD4_DAT5__GPIO2_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* spi flash WP protect */
|
|
MX6_PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* backlight enable */
|
|
MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* LED yellow */
|
|
MX6_PAD_GPIO_3__GPIO1_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* LED red */
|
|
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* LED green */
|
|
MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* LED blue */
|
|
MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* i2c4 scl */
|
|
MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* i2c4 sda */
|
|
MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* spi CS 1 */
|
|
MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const misc_pads[] = {
|
|
MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
/* OTG Power enable */
|
|
MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const enet_pads[] = {
|
|
MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(0x4001b0a8),
|
|
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_enet(void)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
|
|
|
|
/* set GPIO_16 as ENET_REF_CLK_OUT */
|
|
setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
|
|
}
|
|
|
|
static iomux_v3_cfg_t const backlight_pads[] = {
|
|
MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_SD4_DAT1__PWM3_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const ecspi4_pads[] = {
|
|
MX6_PAD_EIM_D21__ECSPI4_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_EIM_D22__ECSPI4_MISO | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_EIM_D28__ECSPI4_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const display_pads[] = {
|
|
MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL),
|
|
MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
|
|
MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
|
|
MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
|
|
MX6_PAD_DI0_PIN4__GPIO4_IO20,
|
|
MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
|
|
MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
|
|
MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
|
|
MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
|
|
MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
|
|
MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
|
|
MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
|
|
MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
|
|
MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
|
|
MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
|
|
MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
|
|
MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
|
|
MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
|
|
MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
|
|
MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
|
|
MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
|
|
MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16,
|
|
MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17,
|
|
MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18,
|
|
MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19,
|
|
MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20,
|
|
MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21,
|
|
MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22,
|
|
MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
|
|
};
|
|
|
|
int board_spi_cs_gpio(unsigned bus, unsigned cs)
|
|
{
|
|
return (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS)
|
|
? (IMX_GPIO_NR(3, 20)) : -1;
|
|
}
|
|
|
|
static void setup_spi(void)
|
|
{
|
|
int i;
|
|
|
|
imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads));
|
|
for (i = 0; i < 3; i++)
|
|
enable_spi_clk(true, i);
|
|
|
|
/* set cs1 to high */
|
|
gpio_direction_output(ECSPI4_CS1, 1);
|
|
}
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct iomuxc *iomuxc_regs =
|
|
(struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
int ret;
|
|
|
|
/* clear gpr1[14], gpr1[18:17] to select anatop clock */
|
|
clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
|
|
|
|
ret = enable_fec_anatop_clock(0, ENET_50MHZ);
|
|
if (ret)
|
|
return ret;
|
|
|
|
setup_iomux_enet();
|
|
return cpu_eth_init(bis);
|
|
}
|
|
|
|
static void enable_lvds(struct display_info_t const *dev)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
display_pads,
|
|
ARRAY_SIZE(display_pads));
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
backlight_pads,
|
|
ARRAY_SIZE(backlight_pads));
|
|
|
|
/* enable backlight PWM 3 */
|
|
if (pwm_init(2, 0, 0))
|
|
goto error;
|
|
/* duty cycle 500ns, period: 3000ns */
|
|
if (pwm_config(2, 500, 3000))
|
|
goto error;
|
|
if (pwm_enable(2))
|
|
goto error;
|
|
return;
|
|
|
|
error:
|
|
puts("error init pwm for backlight\n");
|
|
return;
|
|
}
|
|
|
|
static void setup_display(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
int reg;
|
|
|
|
enable_ipu_clock();
|
|
|
|
reg = readl(&mxc_ccm->cs2cdr);
|
|
/* select pll 5 clock */
|
|
reg &= MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK;
|
|
reg &= MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK;
|
|
writel(reg, &mxc_ccm->cs2cdr);
|
|
|
|
imx_iomux_v3_setup_multiple_pads(backlight_pads,
|
|
ARRAY_SIZE(backlight_pads));
|
|
}
|
|
|
|
static void setup_iomux_gpio(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
setup_iomux_uart();
|
|
setup_iomux_gpio();
|
|
|
|
setup_display();
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void setup_i2c4(void)
|
|
{
|
|
/* i2c4 not used, set it to gpio input */
|
|
gpio_request(IMX_GPIO_NR(1, 7), "i2c4_scl");
|
|
gpio_direction_input(IMX_GPIO_NR(1, 7));
|
|
gpio_request(IMX_GPIO_NR(1, 8), "i2c4_sda");
|
|
gpio_direction_input(IMX_GPIO_NR(1, 8));
|
|
}
|
|
|
|
static void setup_board_gpio(void)
|
|
{
|
|
/* enable LED */
|
|
gpio_request(IMX_GPIO_NR(2, 13), "LED ena");
|
|
gpio_direction_output(IMX_GPIO_NR(2, 13), 0);
|
|
|
|
gpio_request(IMX_GPIO_NR(1, 3), "LED yellow");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 3), 1);
|
|
gpio_request(IMX_GPIO_NR(1, 4), "LED red");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 4), 1);
|
|
gpio_request(IMX_GPIO_NR(1, 5), "LED green");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
|
|
gpio_request(IMX_GPIO_NR(1, 6), "LED blue");
|
|
gpio_direction_output(IMX_GPIO_NR(1, 6), 1);
|
|
}
|
|
|
|
static void setup_board_spi(void)
|
|
{
|
|
}
|