mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 01:19:49 +00:00
8d67c3685e
T2080PCIe-RDB is a Freescale Reference Design Board that hosts the T2080 SoC. It works in two mode: standalone mode and PCIe endpoint mode. T2080PCIe-RDB Feature Overview ------------------------------ Processor: - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz DDR Memory: - Single memory controller capable of supporting DDR3 and DDR3-LP devices - 72bit 4GB DDR3-LP SODIMM in slot Ethernet interfaces: - Two 10M/100M/1G RGMII ports on-board - Two 10Gbps SFP+ ports on-board - Two 10Gbps Base-T ports on-board Accelerator: - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC SerDes 16 lanes configuration: - SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10) - SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2) - SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3) - SerDes-2 Lane A-D: to PCIe Slot (PCIe1 x4, Gen2) - SerDes-2 Lane E-F: to C293 secure co-processor (PCIe2 x2) - SerDes-2 Lane G-H: to SATA1 & SATA2 IFC/Local Bus: - NOR: 128MB 16-bit NOR flash - NAND: 512MB 8-bit NAND flash - CPLD: for system controlling with programable header on-board eSPI: - 64MB N25Q512 SPI flash USB: - Two USB2.0 ports with internal PHY (both Type-A) PCIe: - One PCIe x4 gold-finger - One PCIe x4 connector - One PCIe x2 end-point device (C293 Crypto co-processor) SATA: - Two SATA 2.0 ports on-board SDHC: - support a TF-card on-board I2C: - Four I2C controllers. UART: - Dual 4-pins UART serial ports Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
41 lines
906 B
INI
41 lines
906 B
INI
#
|
|
# Copyright 2013 Freescale Semiconductor, Inc.
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# Refer doc/README.pblimage for more details about how-to configure
|
|
# and create PBL boot image
|
|
#
|
|
|
|
#PBI commands
|
|
#Initialize CPC1
|
|
09010000 00200400
|
|
09138000 00000000
|
|
091380c0 00000100
|
|
#512KB SRAM
|
|
09010100 00000000
|
|
09010104 fff80009
|
|
09010f00 08000000
|
|
#enable CPC1
|
|
09010000 80000000
|
|
#Configure LAW for CPC1
|
|
09000d00 00000000
|
|
09000d04 fff80000
|
|
09000d08 81000012
|
|
#Initialize eSPI controller, default configuration is slow for eSPI to
|
|
#load data, this configuration comes from u-boot eSPI driver.
|
|
09110000 80000403
|
|
09110020 2d170008
|
|
09110024 00100008
|
|
09110028 00100008
|
|
0911002c 00100008
|
|
#Errata for slowing down the MDC clock to make it <= 2.5 MHZ
|
|
094fc030 00008148
|
|
094fd030 00008148
|
|
#Configure alternate space
|
|
09000010 00000000
|
|
09000014 ff000000
|
|
09000018 81000000
|
|
#Flush PBL data
|
|
09138000 00000000
|
|
091380c0 00000000
|