u-boot/board/freescale/mpc8260ads/mpc8260ads.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

544 lines
20 KiB
C

/*
* (C) Copyright 2001-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Modified during 2001 by
* Advanced Communications Technologies (Australia) Pty. Ltd.
* Howard Walker, Tuong Vu-Dinh
*
* (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
* Added support for the 16M dram simm on the 8260ads boards
*
* (C) Copyright 2003-2004 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
* Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init.
*
* Copyright (c) 2005 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
* Added support for PCI.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
#include <asm/m8260_pci.h>
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
#ifdef CONFIG_PCI
#include <pci.h>
#endif
#ifdef CONFIG_OF_LIBFDT
#include <libfdt.h>
#include <fdt_support.h>
#endif
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3)
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */
/* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */
/* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */
/* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */
/* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */
/* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */
/* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */
/* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */
/* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */
/* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
/* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */
/* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */
/* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */
/* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */
/* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */
/* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */
/* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */
/* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */
/* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */
/* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */
/* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */
/* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */
/* PA9 */ { 0, 0, 0, 0, 0, 0 }, /* PA9 */
/* PA8 */ { 0, 0, 0, 0, 0, 0 }, /* PA8 */
/* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
/* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */
/* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
/* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
/* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
/* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
/* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
},
/* Port B configuration */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
/* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
/* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
/* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
/* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
/* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
/* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
/* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
/* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
/* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
/* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
/* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
/* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
/* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
/* PB17 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
/* PB16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
/* PB15 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
/* PB14 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
/* PB13 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:COL */
/* PB12 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
/* PB11 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
/* PB10 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
/* PB9 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
/* PB8 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
/* PB7 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
/* PB6 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
/* PB5 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
/* PB4 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
/* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
/* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */
/* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
/* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
/* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
/* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
/* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
/* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
/* PC22 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Tx Clock (CLK10) */
/* PC21 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII Rx Clock (CLK11) */
/* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */
#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
/* PC19 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */
/* PC18 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */
/* PC17 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK15) */
/* PC16 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK16) */
#else
/* PC19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK13) */
/* PC18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK14) */
/* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
/* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */
#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
/* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */
/* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */
/* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */
/* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */
/* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */
#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
/* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */
/* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */
#else
/* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */
/* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */
#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
/* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */
/* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
/* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
/* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
/* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
/* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
/* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
/* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
/* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 UART RxD */
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 UART TxD */
/* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */
/* PD28 */ { 0, 1, 0, 0, 0, 0 }, /* PD28 */
/* PD27 */ { 0, 1, 1, 1, 0, 0 }, /* PD27 */
/* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
/* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
/* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
/* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
/* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
/* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
/* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
/* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
/* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
/* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
/* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
/* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
/* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
/* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
/* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
}
};
void reset_phy (void)
{
vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
/* Reset the PHY */
#if CONFIG_SYS_PHY_ADDR == 0
bcsr[1] &= ~(FETHIEN1 | FETH1_RST);
udelay(2);
bcsr[1] |= FETH1_RST;
#else
bcsr[3] &= ~(FETHIEN2 | FETH2_RST);
udelay(2);
bcsr[3] |= FETH2_RST;
#endif /* CONFIG_SYS_PHY_ADDR == 0 */
udelay(1000);
#ifdef CONFIG_MII
#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
/*
* Do not bypass Rx/Tx (de)scrambler (fix configuration error)
* Enable autonegotiation.
*/
bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610);
bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR,
BMCR_ANENABLE | BMCR_ANRESTART);
#else
/*
* Ethernet PHY is configured (by means of configuration pins)
* to work at 10Mb/s only. We reconfigure it using MII
* to advertise all capabilities, including 100Mb/s, and
* restart autonegotiation.
*/
/* Advertise all capabilities */
bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_ADVERTISE, 0x01E1);
/* Do not bypass Rx/Tx (de)scrambler */
bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_FCSCOUNTER, 0x0000);
bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR,
BMCR_ANENABLE | BMCR_ANRESTART);
#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
#endif /* CONFIG_MII */
}
#ifdef CONFIG_PCI
typedef struct pci_ic_s {
unsigned long pci_int_stat;
unsigned long pci_int_mask;
}pci_ic_t;
#endif
int board_early_init_f (void)
{
vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
#ifdef CONFIG_PCI
volatile pci_ic_t* pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT;
/* mask alll the PCI interrupts */
pci_ic->pci_int_mask |= 0xfff00000;
#endif
#if (CONFIG_CONS_INDEX == 1) || (CONFIG_KGDB_INDEX == 1)
bcsr[1] &= ~RS232EN_1;
#endif
#if (CONFIG_CONS_INDEX > 1) || (CONFIG_KGDB_INDEX > 1)
bcsr[1] &= ~RS232EN_2;
#endif
#if CONFIG_ADSTYPE != CONFIG_SYS_8260ADS /* PCI mode can be selected */
#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */
#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
immap->im_siu_conf.sc_siumcr =
(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
| SIUMCR_LBPC01;
}
#endif /* CONFIG_ADSTYPE != CONFIG_SYS_8260ADS */
return 0;
}
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1)
phys_size_t initdram (int board_type)
{
#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
long int msize = 32;
#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
long int msize = 64;
#else
long int msize = 16;
#endif
#ifndef CONFIG_SYS_RAMBOOT
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
volatile uchar *ramaddr, c = 0xff;
uint or;
uint psdmr;
uint psrt;
int i;
immap->im_siu_conf.sc_ppc_acr = 0x00000002;
immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
immap->im_siu_conf.sc_tescr1 = 0x00004000;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
#ifdef CONFIG_SYS_LSDRAM_BASE
/*
Initialise local bus SDRAM only if the pins
are configured as local bus pins and not as PCI.
The configuration is determined by the HRCW.
*/
if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
memctl->memc_lsrt = CONFIG_SYS_LSRT;
#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS /* CS3 */
memctl->memc_or3 = 0xFF803280;
memctl->memc_br3 = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
#else /* CS4 */
memctl->memc_or4 = 0xFFC01480;
memctl->memc_br4 = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000;
ramaddr = (uchar *) CONFIG_SYS_LSDRAM_BASE;
*ramaddr = c;
memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000;
for (i = 0; i < 8; i++)
*ramaddr = c;
memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000;
*ramaddr = c;
memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000;
}
#endif /* CONFIG_SYS_LSDRAM_BASE */
/* Init 60x bus SDRAM */
#ifdef CONFIG_SPD_EEPROM
{
spd_eeprom_t spd;
uint pbi, bsel, rowst, lsb, tmp;
i2c_read (CONFIG_SPD_ADDR, 0, 1, (uchar *) & spd, sizeof (spd));
/* Bank-based interleaving is not supported for physical bank
sizes greater than 128MB which is encoded as 0x20 in SPD
*/
pbi = (spd.row_dens > 32) ? 1 : CONFIG_SDRAM_PBI;
msize = spd.nrows * (4 * spd.row_dens); /* Mixed size not supported */
or = ~(msize - 1) << 20; /* SDAM */
switch (spd.nbanks) { /* BPD */
case 2:
bsel = 1;
break;
case 4:
bsel = 2;
or |= 0x00002000;
break;
case 8:
bsel = 3;
or |= 0x00004000;
break;
}
lsb = 3; /* For 64-bit port, lsb is 3 bits */
if (pbi) { /* Bus partition depends on interleaving */
rowst = 32 - (spd.nrow_addr + spd.ncol_addr + bsel + lsb);
or |= (rowst << 9); /* ROWST */
} else {
rowst = 32 - (spd.nrow_addr + spd.ncol_addr + lsb);
or |= ((rowst * 2 - 12) << 9); /* ROWST */
}
or |= ((spd.nrow_addr - 9) << 6); /* NUMR */
psdmr = (pbi << 31); /* PBI */
/* Bus multiplexing parameters */
tmp = 32 - (lsb + spd.nrow_addr); /* Tables 10-19 and 10-20 */
psdmr |= ((tmp - (rowst - 5) - 13) << 24); /* SDAM */
psdmr |= ((tmp - 3 - 12) << 21); /* BSMA */
tmp = (31 - lsb - 10) - tmp;
/* Pin connected to SDA10 is (31 - lsb - 10).
rowst is multiplexed over (32 - (lsb + spd.nrow_addr)),
so (rowst + tmp) alternates with AP.
*/
if (pbi) /* Table 10-7 */
psdmr |= ((10 - (rowst + tmp)) << 18); /* SDA10 */
else
psdmr |= ((12 - (rowst + tmp)) << 18); /* SDA10 */
/* SDRAM device-specific parameters */
tmp = ns2clk (70); /* Refresh recovery is not in SPD, so assume 70ns */
switch (tmp) { /* RFRC */
case 1:
case 2:
psdmr |= (1 << 15);
break;
case 3:
case 4:
case 5:
case 6:
case 7:
case 8:
psdmr |= ((tmp - 2) << 15);
break;
default:
psdmr |= (7 << 15);
}
psdmr |= (ns2clk (spd.trp) % 8 << 12); /* PRETOACT */
psdmr |= (ns2clk (spd.trcd) % 8 << 9); /* ACTTORW */
/* BL=0 because for 64-bit SDRAM burst length must be 4 */
/* LDOTOPRE ??? */
for (i = 0, tmp = spd.write_lat; (i < 4) && ((tmp & 1) == 0); i++)
tmp >>= 1;
switch (i) { /* WRC */
case 0:
case 1:
psdmr |= (1 << 4);
break;
case 2:
case 3:
psdmr |= (i << 4);
break;
}
/* EAMUX=0 - no external address multiplexing */
/* BUFCMD=0 - no external buffers */
for (i = 1, tmp = spd.cas_lat; (i < 3) && ((tmp & 1) == 0); i++)
tmp >>= 1;
psdmr |= i; /* CL */
switch (spd.refresh & 0x7F) {
case 1:
tmp = 3900;
break;
case 2:
tmp = 7800;
break;
case 3:
tmp = 31300;
break;
case 4:
tmp = 62500;
break;
case 5:
tmp = 125000;
break;
default:
tmp = 15625;
}
psrt = tmp / (1000000000 / CONFIG_8260_CLKIN *
((memctl->memc_mptpr >> 8) + 1)) - 1;
#ifdef SPD_DEBUG
printf ("\nDIMM type: %-18.18s\n", spd.mpart);
printf ("SPD size: %d\n", spd.info_size);
printf ("EEPROM size: %d\n", 1 << spd.chip_size);
printf ("Memory type: %d\n", spd.mem_type);
printf ("Row addr: %d\n", spd.nrow_addr);
printf ("Column addr: %d\n", spd.ncol_addr);
printf ("# of rows: %d\n", spd.nrows);
printf ("Row density: %d\n", spd.row_dens);
printf ("# of banks: %d\n", spd.nbanks);
printf ("Data width: %d\n",
256 * spd.dataw_msb + spd.dataw_lsb);
printf ("Chip width: %d\n", spd.primw);
printf ("Refresh rate: %02X\n", spd.refresh);
printf ("CAS latencies: %02X\n", spd.cas_lat);
printf ("Write latencies: %02X\n", spd.write_lat);
printf ("tRP: %d\n", spd.trp);
printf ("tRCD: %d\n", spd.trcd);
printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
#endif /* SPD_DEBUG */
}
#else /* !CONFIG_SPD_EEPROM */
or = CONFIG_SYS_OR2;
psdmr = CONFIG_SYS_PSDMR;
psrt = CONFIG_SYS_PSRT;
#endif /* CONFIG_SPD_EEPROM */
memctl->memc_psrt = psrt;
memctl->memc_or2 = or;
memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x00000041;
ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE;
memctl->memc_psdmr = psdmr | 0x28000000; /* Precharge all banks */
*ramaddr = c;
memctl->memc_psdmr = psdmr | 0x08000000; /* CBR refresh */
for (i = 0; i < 8; i++)
*ramaddr = c;
memctl->memc_psdmr = psdmr | 0x18000000; /* Mode Register write */
*ramaddr = c;
memctl->memc_psdmr = psdmr | 0x40000000; /* Refresh enable */
*ramaddr = c;
#endif /* CONFIG_SYS_RAMBOOT */
/* return total 60x bus SDRAM size */
return (msize * 1024 * 1024);
}
int checkboard (void)
{
#if CONFIG_ADSTYPE == CONFIG_SYS_8260ADS
puts ("Board: Motorola MPC8260ADS\n");
#elif CONFIG_ADSTYPE == CONFIG_SYS_8266ADS
puts ("Board: Motorola MPC8266ADS\n");
#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
puts ("Board: Motorola PQ2FADS-ZU\n");
#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
puts ("Board: Motorola MPC8272ADS\n");
#else
puts ("Board: unknown\n");
#endif
return 0;
}
#ifdef CONFIG_PCI
struct pci_controller hose;
extern void pci_mpc8250_init(struct pci_controller *);
void pci_init_board(void)
{
pci_mpc8250_init(&hose);
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
}
#endif