u-boot/include/configs/sniper.h
Adam Ford acc415ac60 Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMCSD_FS_BOOT_PARTITION

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28 16:18:10 -04:00

142 lines
2.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* LG Optimus Black codename sniper config
*
* Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/cpu.h>
#include <asm/arch/omap.h>
/*
* CPU
*/
#define CONFIG_ARM_ARCH_CP15_ERRATA
/*
* Board
*/
/*
* Clocks
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2
#define V_NS16550_CLK 48000000
#define V_OSCK 26000000
#define V_SCLK (V_OSCK >> 1)
/*
* DRAM
*/
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/*
* Memory
*/
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
/*
* I2C
*/
#define CONFIG_SYS_I2C
#define CONFIG_I2C_MULTI_BUS
/*
* Input
*/
/*
* SPL
*/
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
#define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_CBSIZE 512
/*
* Serial
*/
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#endif
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
115200 }
/*
* Environment
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x82000000\0" \
"loadaddr=0x82000000\0" \
"fdt_addr_r=0x88000000\0" \
"fdtaddr=0x88000000\0" \
"ramdisk_addr_r=0x88080000\0" \
"pxefile_addr_r=0x80100000\0" \
"scriptaddr=0x80000000\0" \
"bootm_size=0x10000000\0" \
"boot_mmc_dev=0\0" \
"kernel_mmc_part=3\0" \
"recovery_mmc_part=4\0" \
"fdtfile=omap3-sniper.dtb\0" \
"bootfile=/boot/extlinux/extlinux.conf\0" \
"bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
/*
* ATAGs
*/
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SERIAL_TAG
/*
* Boot
*/
#define CONFIG_SYS_LOAD_ADDR 0x82000000
#define CONFIG_BOOTCOMMAND \
"setenv boot_mmc_part ${kernel_mmc_part}; " \
"if test reboot-${reboot-mode} = reboot-r; then " \
"echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
"if test reboot-${reboot-mode} = reboot-b; then " \
"echo fastboot; fastboot 0; fi; " \
"part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
"part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
"mmc dev ${boot_mmc_dev}; " \
"mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
"bootm ${kernel_addr_r};"
#endif