mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
82c30736ae
- Add additional step which enables the Impedance and PLL calibration. - Enable old squelch detector instead of the new analog squelch detector circuit and update host disconnect threshold value. - Update LS TX driver strength coarse and fine adjustment values. Change-Id: Ifa0a585bfb5ecab0bfa033eed6874ff98b16a7df Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
101 lines
3.5 KiB
C
101 lines
3.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2015-2016 Marvell International Ltd.
|
|
*/
|
|
|
|
#ifndef _UTMI_PHY_H_
|
|
#define _UTMI_PHY_H_
|
|
|
|
#define UTMI_USB_CFG_DEVICE_EN_OFFSET 0
|
|
#define UTMI_USB_CFG_DEVICE_EN_MASK \
|
|
(0x1 << UTMI_USB_CFG_DEVICE_EN_OFFSET)
|
|
#define UTMI_USB_CFG_DEVICE_MUX_OFFSET 1
|
|
#define UTMI_USB_CFG_DEVICE_MUX_MASK \
|
|
(0x1 << UTMI_USB_CFG_DEVICE_MUX_OFFSET)
|
|
#define UTMI_USB_CFG_PLL_OFFSET 25
|
|
#define UTMI_USB_CFG_PLL_MASK \
|
|
(0x1 << UTMI_USB_CFG_PLL_OFFSET)
|
|
|
|
#define UTMI_PHY_CFG_PU_OFFSET 5
|
|
#define UTMI_PHY_CFG_PU_MASK \
|
|
(0x1 << UTMI_PHY_CFG_PU_OFFSET)
|
|
|
|
#define UTMI_PLL_CTRL_REG 0x0
|
|
#define UTMI_PLL_CTRL_REFDIV_OFFSET 0
|
|
#define UTMI_PLL_CTRL_REFDIV_MASK \
|
|
(0x7f << UTMI_PLL_CTRL_REFDIV_OFFSET)
|
|
#define UTMI_PLL_CTRL_FBDIV_OFFSET 16
|
|
#define UTMI_PLL_CTRL_FBDIV_MASK \
|
|
(0x1FF << UTMI_PLL_CTRL_FBDIV_OFFSET)
|
|
#define UTMI_PLL_CTRL_SEL_LPFR_OFFSET 28
|
|
#define UTMI_PLL_CTRL_SEL_LPFR_MASK \
|
|
(0x3 << UTMI_PLL_CTRL_SEL_LPFR_OFFSET)
|
|
#define UTMI_PLL_CTRL_PLL_RDY_OFFSET 31
|
|
#define UTMI_PLL_CTRL_PLL_RDY_MASK \
|
|
(0x1 << UTMI_PLL_CTRL_PLL_RDY_OFFSET)
|
|
|
|
#define UTMI_CALIB_CTRL_REG 0x8
|
|
#define UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET 8
|
|
#define UTMI_CALIB_CTRL_IMPCAL_VTH_MASK \
|
|
(0x7 << UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET)
|
|
#define UTMI_CALIB_CTRL_IMPCAL_START_OFFSET 13
|
|
#define UTMI_CALIB_CTRL_IMPCAL_START_MASK \
|
|
(0x1 << UTMI_CALIB_CTRL_IMPCAL_START_OFFSET)
|
|
#define UTMI_CALIB_CTRL_PLLCAL_START_OFFSET 22
|
|
#define UTMI_CALIB_CTRL_PLLCAL_START_MASK \
|
|
(0x1 << UTMI_CALIB_CTRL_PLLCAL_START_OFFSET)
|
|
#define UTMI_CALIB_CTRL_IMPCAL_DONE_OFFSET 23
|
|
#define UTMI_CALIB_CTRL_IMPCAL_DONE_MASK \
|
|
(0x1 << UTMI_CALIB_CTRL_IMPCAL_DONE_OFFSET)
|
|
#define UTMI_CALIB_CTRL_PLLCAL_DONE_OFFSET 31
|
|
#define UTMI_CALIB_CTRL_PLLCAL_DONE_MASK \
|
|
(0x1 << UTMI_CALIB_CTRL_PLLCAL_DONE_OFFSET)
|
|
|
|
#define UTMI_TX_CH_CTRL_REG 0x0
|
|
#define UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET 12
|
|
#define UTMI_TX_CH_CTRL_DRV_EN_LS_MASK \
|
|
(0xf << UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET)
|
|
#define UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET 16
|
|
#define UTMI_TX_CH_CTRL_IMP_SEL_LS_MASK \
|
|
(0xf << UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET)
|
|
#define UTMI_TX_CH_CTRL_AMP_OFFSET 20
|
|
#define UTMI_TX_CH_CTRL_AMP_MASK \
|
|
(0x7 << UTMI_TX_CH_CTRL_AMP_OFFSET)
|
|
|
|
#define UTMI_RX_CH_CTRL0_REG 0x8
|
|
#define UTMI_RX_CH_CTRL0_DISCON_THRESH_OFFSET 8
|
|
#define UTMI_RX_CH_CTRL0_DISCON_THRESH_MASK \
|
|
(0x3 << UTMI_RX_CH_CTRL0_DISCON_THRESH_OFFSET)
|
|
#define UTMI_RX_CH_CTRL0_SQ_DET_OFFSET 15
|
|
#define UTMI_RX_CH_CTRL0_SQ_DET_MASK \
|
|
(0x1 << UTMI_RX_CH_CTRL0_SQ_DET_OFFSET)
|
|
#define UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET 28
|
|
#define UTMI_RX_CH_CTRL0_SQ_ANA_DTC_MASK \
|
|
(0x1 << UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET)
|
|
|
|
#define UTMI_RX_CH_CTRL1_REG 0xc
|
|
#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET 0
|
|
#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_MASK \
|
|
(0x7 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET)
|
|
#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET 3
|
|
#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_MASK \
|
|
(0x1 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET)
|
|
|
|
#define UTMI_CTRL_STATUS0_REG 0x18
|
|
#define UTMI_CTRL_STATUS0_SUSPENDM_OFFSET 22
|
|
#define UTMI_CTRL_STATUS0_SUSPENDM_MASK \
|
|
(0x1 << UTMI_CTRL_STATUS0_SUSPENDM_OFFSET)
|
|
#define UTMI_CTRL_STATUS0_TEST_SEL_OFFSET 25
|
|
#define UTMI_CTRL_STATUS0_TEST_SEL_MASK \
|
|
(0x1 << UTMI_CTRL_STATUS0_TEST_SEL_OFFSET)
|
|
|
|
#define UTMI_CHGDTC_CTRL_REG 0x2c
|
|
#define UTMI_CHGDTC_CTRL_VDAT_OFFSET 8
|
|
#define UTMI_CHGDTC_CTRL_VDAT_MASK \
|
|
(0x3 << UTMI_CHGDTC_CTRL_VDAT_OFFSET)
|
|
#define UTMI_CHGDTC_CTRL_VSRC_OFFSET 10
|
|
#define UTMI_CHGDTC_CTRL_VSRC_MASK \
|
|
(0x3 << UTMI_CHGDTC_CTRL_VSRC_OFFSET)
|
|
|
|
#endif /* _UTMI_PHY_H_ */
|
|
|