mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 12:33:41 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
249 lines
7.9 KiB
C
249 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* Derived from mpc85xx_ddr_gen3.c, removed all workarounds
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/processor.h>
|
|
#include <fsl_immap.h>
|
|
#include <fsl_ddr.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <linux/delay.h>
|
|
|
|
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
|
|
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
|
|
#endif
|
|
|
|
|
|
/*
|
|
* regs has the to-be-set values for DDR controller registers
|
|
* ctrl_num is the DDR controller number
|
|
* step: 0 goes through the initialization in one pass
|
|
* 1 sets registers and returns before enabling controller
|
|
* 2 resumes from step 1 and continues to initialize
|
|
* Dividing the initialization to two steps to deassert DDR reset signal
|
|
* to comply with JEDEC specs for RDIMMs.
|
|
*/
|
|
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
|
|
unsigned int ctrl_num, int step)
|
|
{
|
|
unsigned int i, bus_width;
|
|
struct ccsr_ddr __iomem *ddr;
|
|
u32 temp_sdram_cfg;
|
|
u32 total_gb_size_per_controller;
|
|
int timeout;
|
|
|
|
switch (ctrl_num) {
|
|
case 0:
|
|
ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
|
|
break;
|
|
#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
|
|
case 1:
|
|
ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
|
|
case 2:
|
|
ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
|
|
case 3:
|
|
ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num);
|
|
return;
|
|
}
|
|
|
|
if (step == 2)
|
|
goto step2;
|
|
|
|
if (regs->ddr_eor)
|
|
ddr_out32(&ddr->eor, regs->ddr_eor);
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
if (i == 0) {
|
|
ddr_out32(&ddr->cs0_bnds, regs->cs[i].bnds);
|
|
ddr_out32(&ddr->cs0_config, regs->cs[i].config);
|
|
ddr_out32(&ddr->cs0_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 1) {
|
|
ddr_out32(&ddr->cs1_bnds, regs->cs[i].bnds);
|
|
ddr_out32(&ddr->cs1_config, regs->cs[i].config);
|
|
ddr_out32(&ddr->cs1_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 2) {
|
|
ddr_out32(&ddr->cs2_bnds, regs->cs[i].bnds);
|
|
ddr_out32(&ddr->cs2_config, regs->cs[i].config);
|
|
ddr_out32(&ddr->cs2_config_2, regs->cs[i].config_2);
|
|
|
|
} else if (i == 3) {
|
|
ddr_out32(&ddr->cs3_bnds, regs->cs[i].bnds);
|
|
ddr_out32(&ddr->cs3_config, regs->cs[i].config);
|
|
ddr_out32(&ddr->cs3_config_2, regs->cs[i].config_2);
|
|
}
|
|
}
|
|
|
|
ddr_out32(&ddr->timing_cfg_3, regs->timing_cfg_3);
|
|
ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0);
|
|
ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1);
|
|
ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2);
|
|
ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
|
|
ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
|
|
ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
|
|
ddr_out32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
|
|
ddr_out32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
|
|
ddr_out32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
|
|
ddr_out32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
|
|
ddr_out32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
|
|
ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
|
|
ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
|
|
ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
|
|
ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
|
|
ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4);
|
|
ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5);
|
|
ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
|
|
ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
|
|
#ifndef CONFIG_SYS_FSL_DDR_EMU
|
|
/*
|
|
* Skip these two registers if running on emulator
|
|
* because emulator doesn't have skew between bytes.
|
|
*/
|
|
|
|
if (regs->ddr_wrlvl_cntl_2)
|
|
ddr_out32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
|
|
if (regs->ddr_wrlvl_cntl_3)
|
|
ddr_out32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
|
|
#endif
|
|
|
|
ddr_out32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
|
|
ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
|
|
ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
|
|
ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
|
|
#ifdef CONFIG_DEEP_SLEEP
|
|
if (is_warm_boot()) {
|
|
ddr_out32(&ddr->sdram_cfg_2,
|
|
regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
|
|
ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
|
|
ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
|
|
|
|
/* DRAM VRef will not be trained */
|
|
ddr_out32(&ddr->ddr_cdr2,
|
|
regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
|
|
} else
|
|
#endif
|
|
{
|
|
ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
|
|
ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
|
|
ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
|
|
ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
|
|
}
|
|
ddr_out32(&ddr->err_disable, regs->err_disable);
|
|
ddr_out32(&ddr->err_int_en, regs->err_int_en);
|
|
for (i = 0; i < 32; i++) {
|
|
if (regs->debug[i]) {
|
|
debug("Write to debug_%d as %08x\n", i + 1,
|
|
regs->debug[i]);
|
|
ddr_out32(&ddr->debug[i], regs->debug[i]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For RDIMMs, JEDEC spec requires clocks to be stable before reset is
|
|
* deasserted. Clocks start when any chip select is enabled and clock
|
|
* control register is set. Because all DDR components are connected to
|
|
* one reset signal, this needs to be done in two steps. Step 1 is to
|
|
* get the clocks started. Step 2 resumes after reset signal is
|
|
* deasserted.
|
|
*/
|
|
if (step == 1) {
|
|
udelay(200);
|
|
return;
|
|
}
|
|
|
|
step2:
|
|
/* Set, but do not enable the memory */
|
|
temp_sdram_cfg = regs->ddr_sdram_cfg;
|
|
temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
|
|
ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg);
|
|
|
|
/*
|
|
* 500 painful micro-seconds must elapse between
|
|
* the DDR clock setup and the DDR config enable.
|
|
* DDR2 need 200 us, and DDR3 need 500 us from spec,
|
|
* we choose the max, that is 500 us for all of case.
|
|
*/
|
|
udelay(500);
|
|
asm volatile("dsb sy;isb");
|
|
|
|
#ifdef CONFIG_DEEP_SLEEP
|
|
if (is_warm_boot()) {
|
|
/* enter self-refresh */
|
|
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
|
|
temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
|
|
ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
|
|
/* do board specific memory setup */
|
|
board_mem_sleep_setup();
|
|
|
|
temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
|
|
} else
|
|
#endif
|
|
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
|
|
/* Let the controller go */
|
|
ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
|
|
asm volatile("dsb sy;isb");
|
|
|
|
total_gb_size_per_controller = 0;
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
if (!(regs->cs[i].config & 0x80000000))
|
|
continue;
|
|
total_gb_size_per_controller += 1 << (
|
|
((regs->cs[i].config >> 14) & 0x3) + 2 +
|
|
((regs->cs[i].config >> 8) & 0x7) + 12 +
|
|
((regs->cs[i].config >> 0) & 0x7) + 8 +
|
|
3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
|
|
26); /* minus 26 (count of 64M) */
|
|
}
|
|
if (regs->cs[0].config & 0x20000000) {
|
|
/* 2-way interleaving */
|
|
total_gb_size_per_controller <<= 1;
|
|
}
|
|
/*
|
|
* total memory / bus width = transactions needed
|
|
* transactions needed / data rate = seconds
|
|
* to add plenty of buffer, double the time
|
|
* For example, 2GB on 666MT/s 64-bit bus takes about 402ms
|
|
* Let's wait for 800ms
|
|
*/
|
|
bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK)
|
|
>> SDRAM_CFG_DBW_SHIFT);
|
|
timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
|
|
(get_ddr_freq(ctrl_num) >> 20)) << 1;
|
|
total_gb_size_per_controller >>= 4; /* shift down to gb size */
|
|
debug("total %d GB\n", total_gb_size_per_controller);
|
|
debug("Need to wait up to %d * 10ms\n", timeout);
|
|
|
|
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
|
|
while ((ddr_in32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
|
|
(timeout >= 0)) {
|
|
udelay(10000); /* throttle polling rate */
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout <= 0)
|
|
printf("Waiting for D_INIT timeout. Memory may not work.\n");
|
|
#ifdef CONFIG_DEEP_SLEEP
|
|
if (is_warm_boot()) {
|
|
/* exit self-refresh */
|
|
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
|
|
temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
|
|
ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
|
|
}
|
|
#endif
|
|
}
|