mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
fe133eb192
Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
70 lines
1.9 KiB
ReStructuredText
70 lines
1.9 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
U-Boot for the Congatec conga-QMX8 board
|
|
========================================
|
|
|
|
Quick Start
|
|
-----------
|
|
|
|
- Build the ARM Trusted firmware binary
|
|
- Get scfw_tcm.bin and ahab-container.img
|
|
- Get imx-mkimage
|
|
- Build U-Boot
|
|
- Build imx-mkimage
|
|
- Flash the binary into the SD card
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
--------------------------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ git clone https://source.codeaurora.org/external/imx/imx-atf
|
|
$ cd imx-atf/
|
|
$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
|
|
$ make PLAT=imx8qm bl31
|
|
|
|
Get scfw_tcm.bin and ahab-container.img
|
|
---------------------------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
|
|
$ chmod +x imx-sc-firmware-1.1.bin
|
|
$ ./imx-sc-firmware-1.1.bin
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
|
|
$ chmod +x firmware-imx-8.0.bin
|
|
$ ./firmware-imx-8.0.bin
|
|
|
|
Or use this to avoid running random scripts from the internet,
|
|
but note that you must agree to the license the script displays:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ dd if=imx-sc-firmware-1.1.bin of=imx-sc-firmware-1.1.tar.bz2 bs=37185 skip=1
|
|
$ tar -xf imx-sc-firmware-1.1.tar.bz2
|
|
$ cp imx-sc-firmware-1.1/mx8qx-val-scfw-tcm.bin $(builddir)
|
|
|
|
$ dd if=firmware-imx-8.0.bin of=firmware-imx-8.0.tar.bz2 bs=37180 skip=1
|
|
$ tar -xf firmware-imx-8.0.tar.bz2
|
|
$ cp firmware-imx-8.0/firmware/seco/mx8qm-ahab-container.img $(builddir)
|
|
|
|
Build U-Boot
|
|
------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ export ATF_LOAD_ADDR=0x80000000
|
|
$ export BL33_LOAD_ADDR=0x80020000
|
|
$ make cgtqmx8_defconfig
|
|
$ make u-boot.bin
|
|
$ make flash.bin
|
|
|
|
Flash the binary into the SD card
|
|
---------------------------------
|
|
|
|
Burn the flash.bin binary to SD card offset 32KB:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ sudo dd if=flash.bin of=/dev/sd[x] bs=1k seek=32 conv=fsync
|