mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
ba94a1bba3
- Add IXP4xx NPE ethernet MAC support - Add support for Intel IXDPG425 board - Add support for Prodrive PDNB3 board - Add IRQ support Patch by Stefan Roese, 23 May 2006 [This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still sufferes from licensing issues. Blame Intel.]
497 lines
13 KiB
C
497 lines
13 KiB
C
/**
|
|
* @file IxEthMii.c
|
|
*
|
|
* @author Intel Corporation
|
|
* @date
|
|
*
|
|
* @brief MII control functions
|
|
*
|
|
* Design Notes:
|
|
*
|
|
*
|
|
* @par
|
|
* IXP400 SW Release version 2.0
|
|
*
|
|
* -- Copyright Notice --
|
|
*
|
|
* @par
|
|
* Copyright 2001-2005, Intel Corporation.
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Intel Corporation nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* @par
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @par
|
|
* -- End of Copyright Notice --
|
|
*/
|
|
|
|
#include "IxOsal.h"
|
|
|
|
#include "IxEthAcc.h"
|
|
#include "IxEthMii_p.h"
|
|
|
|
#ifdef __wince
|
|
#include "IxOsPrintf.h"
|
|
#endif
|
|
|
|
/* Array to store the phy IDs of the discovered phys */
|
|
PRIVATE UINT32 ixEthMiiPhyId[IXP425_ETH_ACC_MII_MAX_ADDR];
|
|
|
|
/*********************************************************
|
|
*
|
|
* Scan for PHYs on the MII bus. This function returns
|
|
* an array of booleans, one for each PHY address.
|
|
* If a PHY is found at a particular address, the
|
|
* corresponding entry in the array is set to TRUE.
|
|
*
|
|
*/
|
|
|
|
PUBLIC IX_STATUS
|
|
ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount)
|
|
{
|
|
UINT32 i;
|
|
UINT16 regval, regvalId1, regvalId2;
|
|
|
|
/*Search for PHYs on the MII*/
|
|
/*Search for existant phys on the MDIO bus*/
|
|
|
|
if ((phyPresent == NULL) ||
|
|
(maxPhyCount > IXP425_ETH_ACC_MII_MAX_ADDR))
|
|
{
|
|
return IX_FAIL;
|
|
}
|
|
|
|
/* fill the array */
|
|
for(i=0;
|
|
i<IXP425_ETH_ACC_MII_MAX_ADDR;
|
|
i++)
|
|
{
|
|
phyPresent[i] = FALSE;
|
|
}
|
|
|
|
/* iterate through the PHY addresses */
|
|
for(i=0;
|
|
maxPhyCount > 0 && i<IXP425_ETH_ACC_MII_MAX_ADDR;
|
|
i++)
|
|
{
|
|
ixEthMiiPhyId[i] = IX_ETH_MII_INVALID_PHY_ID;
|
|
if(ixEthAccMiiReadRtn(i,
|
|
IX_ETH_MII_CTRL_REG,
|
|
®val) == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
if((regval & 0xffff) != 0xffff)
|
|
{
|
|
maxPhyCount--;
|
|
/*Need to read the register twice here to flush PHY*/
|
|
ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID1_REG, ®valId1);
|
|
ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID1_REG, ®valId1);
|
|
ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID2_REG, ®valId2);
|
|
ixEthMiiPhyId[i] = (regvalId1 << IX_ETH_MII_REG_SHL) | regvalId2;
|
|
if ((ixEthMiiPhyId[i] == IX_ETH_MII_KS8995_PHY_ID)
|
|
|| (ixEthMiiPhyId[i] == IX_ETH_MII_LXT971_PHY_ID)
|
|
|| (ixEthMiiPhyId[i] == IX_ETH_MII_LXT972_PHY_ID)
|
|
|| (ixEthMiiPhyId[i] == IX_ETH_MII_LXT973_PHY_ID)
|
|
|| (ixEthMiiPhyId[i] == IX_ETH_MII_LXT973A3_PHY_ID)
|
|
|| (ixEthMiiPhyId[i] == IX_ETH_MII_LXT9785_PHY_ID)
|
|
)
|
|
{
|
|
/* supported phy */
|
|
phyPresent[i] = TRUE;
|
|
} /* end of if(ixEthMiiPhyId) */
|
|
else
|
|
{
|
|
if (ixEthMiiPhyId[i] != IX_ETH_MII_INVALID_PHY_ID)
|
|
{
|
|
/* unsupported phy */
|
|
ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
|
|
IX_OSAL_LOG_DEV_STDOUT,
|
|
"ixEthMiiPhyScan : unexpected Mii PHY ID %8.8x\n",
|
|
ixEthMiiPhyId[i], 2, 3, 4, 5, 6);
|
|
ixEthMiiPhyId[i] = IX_ETH_MII_UNKNOWN_PHY_ID;
|
|
phyPresent[i] = TRUE;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return IX_SUCCESS;
|
|
}
|
|
|
|
/************************************************************
|
|
*
|
|
* Configure the PHY at the specified address
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS
|
|
ixEthMiiPhyConfig(UINT32 phyAddr,
|
|
BOOL speed100,
|
|
BOOL fullDuplex,
|
|
BOOL autonegotiate)
|
|
{
|
|
UINT16 regval=0;
|
|
|
|
/* parameter check */
|
|
if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
|
|
(ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
|
|
{
|
|
/*
|
|
* set the control register
|
|
*/
|
|
if(autonegotiate)
|
|
{
|
|
regval |= IX_ETH_MII_CR_AUTO_EN | IX_ETH_MII_CR_RESTART;
|
|
}
|
|
else
|
|
{
|
|
if(speed100)
|
|
{
|
|
regval |= IX_ETH_MII_CR_100;
|
|
}
|
|
if(fullDuplex)
|
|
{
|
|
regval |= IX_ETH_MII_CR_FDX;
|
|
}
|
|
} /* end of if-else() */
|
|
if (ixEthAccMiiWriteRtn(phyAddr,
|
|
IX_ETH_MII_CTRL_REG,
|
|
regval) == IX_ETH_ACC_SUCCESS)
|
|
{
|
|
return IX_SUCCESS;
|
|
}
|
|
} /* end of if(phyAddr) */
|
|
return IX_FAIL;
|
|
}
|
|
|
|
/******************************************************************
|
|
*
|
|
* Enable the PHY Loopback at the specified address
|
|
*/
|
|
PUBLIC IX_STATUS
|
|
ixEthMiiPhyLoopbackEnable (UINT32 phyAddr)
|
|
{
|
|
UINT16 regval ;
|
|
|
|
if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
|
|
(IX_ETH_MII_INVALID_PHY_ID != ixEthMiiPhyId[phyAddr]))
|
|
{
|
|
/* read/write the control register */
|
|
if(ixEthAccMiiReadRtn (phyAddr,
|
|
IX_ETH_MII_CTRL_REG,
|
|
®val)
|
|
== IX_ETH_ACC_SUCCESS)
|
|
{
|
|
if(ixEthAccMiiWriteRtn (phyAddr,
|
|
IX_ETH_MII_CTRL_REG,
|
|
regval | IX_ETH_MII_CR_LOOPBACK)
|
|
== IX_ETH_ACC_SUCCESS)
|
|
{
|
|
return IX_SUCCESS;
|
|
}
|
|
}
|
|
}
|
|
return IX_FAIL;
|
|
}
|
|
|
|
/******************************************************************
|
|
*
|
|
* Disable the PHY Loopback at the specified address
|
|
*/
|
|
PUBLIC IX_STATUS
|
|
ixEthMiiPhyLoopbackDisable (UINT32 phyAddr)
|
|
{
|
|
UINT16 regval ;
|
|
|
|
if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
|
|
(IX_ETH_MII_INVALID_PHY_ID != ixEthMiiPhyId[phyAddr]))
|
|
{
|
|
/* read/write the control register */
|
|
if(ixEthAccMiiReadRtn (phyAddr,
|
|
IX_ETH_MII_CTRL_REG,
|
|
®val)
|
|
== IX_ETH_ACC_SUCCESS)
|
|
{
|
|
if(ixEthAccMiiWriteRtn (phyAddr,
|
|
IX_ETH_MII_CTRL_REG,
|
|
regval & (~IX_ETH_MII_CR_LOOPBACK))
|
|
== IX_ETH_ACC_SUCCESS)
|
|
{
|
|
return IX_SUCCESS;
|
|
}
|
|
}
|
|
}
|
|
return IX_FAIL;
|
|
}
|
|
|
|
/******************************************************************
|
|
*
|
|
* Reset the PHY at the specified address
|
|
*/
|
|
PUBLIC IX_STATUS
|
|
ixEthMiiPhyReset(UINT32 phyAddr)
|
|
{
|
|
UINT32 timeout;
|
|
UINT16 regval;
|
|
|
|
if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
|
|
(ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
|
|
{
|
|
if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID) ||
|
|
(ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID) ||
|
|
(ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT973_PHY_ID) ||
|
|
(ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT973A3_PHY_ID) ||
|
|
(ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID)
|
|
)
|
|
{
|
|
/* use the control register to reset the phy */
|
|
ixEthAccMiiWriteRtn(phyAddr,
|
|
IX_ETH_MII_CTRL_REG,
|
|
IX_ETH_MII_CR_RESET);
|
|
|
|
/* poll until the reset bit is cleared */
|
|
timeout = 0;
|
|
do
|
|
{
|
|
ixOsalSleep (IX_ETH_MII_RESET_POLL_MS);
|
|
|
|
/* read the control register and check for timeout */
|
|
ixEthAccMiiReadRtn(phyAddr,
|
|
IX_ETH_MII_CTRL_REG,
|
|
®val);
|
|
if ((regval & IX_ETH_MII_CR_RESET) == 0)
|
|
{
|
|
/* timeout bit is self-cleared */
|
|
break;
|
|
}
|
|
timeout += IX_ETH_MII_RESET_POLL_MS;
|
|
}
|
|
while (timeout < IX_ETH_MII_RESET_DELAY_MS);
|
|
|
|
/* check for timeout */
|
|
if (timeout >= IX_ETH_MII_RESET_DELAY_MS)
|
|
{
|
|
ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
|
|
IX_ETH_MII_CR_NORM_EN);
|
|
return IX_FAIL;
|
|
}
|
|
|
|
return IX_SUCCESS;
|
|
} /* end of if(ixEthMiiPhyId) */
|
|
else if (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_KS8995_PHY_ID)
|
|
{
|
|
/* reset bit is reserved, just reset the control register */
|
|
ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
|
|
IX_ETH_MII_CR_NORM_EN);
|
|
return IX_SUCCESS;
|
|
}
|
|
else
|
|
{
|
|
/* unknown PHY, set the control register reset bit,
|
|
* wait 2 s. and clear the control register.
|
|
*/
|
|
ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
|
|
IX_ETH_MII_CR_RESET);
|
|
|
|
ixOsalSleep (IX_ETH_MII_RESET_DELAY_MS);
|
|
|
|
ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
|
|
IX_ETH_MII_CR_NORM_EN);
|
|
return IX_SUCCESS;
|
|
} /* end of if-else(ixEthMiiPhyId) */
|
|
} /* end of if(phyAddr) */
|
|
return IX_FAIL;
|
|
}
|
|
|
|
/*****************************************************************
|
|
*
|
|
* Link state query functions
|
|
*/
|
|
|
|
PUBLIC IX_STATUS
|
|
ixEthMiiLinkStatus(UINT32 phyAddr,
|
|
BOOL *linkUp,
|
|
BOOL *speed100,
|
|
BOOL *fullDuplex,
|
|
BOOL *autoneg)
|
|
{
|
|
UINT16 ctrlRegval, statRegval, regval, regval4, regval5;
|
|
|
|
/* check the parameters */
|
|
if ((linkUp == NULL) ||
|
|
(speed100 == NULL) ||
|
|
(fullDuplex == NULL) ||
|
|
(autoneg == NULL))
|
|
{
|
|
return IX_FAIL;
|
|
}
|
|
|
|
*linkUp = FALSE;
|
|
*speed100 = FALSE;
|
|
*fullDuplex = FALSE;
|
|
*autoneg = FALSE;
|
|
|
|
if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
|
|
(ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
|
|
{
|
|
if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID) ||
|
|
(ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID) ||
|
|
(ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID)
|
|
)
|
|
{
|
|
/* --------------------------------------------------*/
|
|
/* Retrieve information from PHY specific register */
|
|
/* --------------------------------------------------*/
|
|
if (ixEthAccMiiReadRtn(phyAddr,
|
|
IX_ETH_MII_STAT2_REG,
|
|
®val) != IX_ETH_ACC_SUCCESS)
|
|
{
|
|
return IX_FAIL;
|
|
}
|
|
*linkUp = ((regval & IX_ETH_MII_SR2_LINK) != 0);
|
|
*speed100 = ((regval & IX_ETH_MII_SR2_100) != 0);
|
|
*fullDuplex = ((regval & IX_ETH_MII_SR2_FD) != 0);
|
|
*autoneg = ((regval & IX_ETH_MII_SR2_AUTO) != 0);
|
|
return IX_SUCCESS;
|
|
} /* end of if(ixEthMiiPhyId) */
|
|
else
|
|
{
|
|
/* ----------------------------------------------------*/
|
|
/* Retrieve information from status and ctrl registers */
|
|
/* ----------------------------------------------------*/
|
|
if (ixEthAccMiiReadRtn(phyAddr,
|
|
IX_ETH_MII_CTRL_REG,
|
|
&ctrlRegval) != IX_ETH_ACC_SUCCESS)
|
|
{
|
|
return IX_FAIL;
|
|
}
|
|
ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_STAT_REG, &statRegval);
|
|
|
|
*linkUp = ((statRegval & IX_ETH_MII_SR_LINK_STATUS) != 0);
|
|
if (*linkUp)
|
|
{
|
|
*autoneg = ((ctrlRegval & IX_ETH_MII_CR_AUTO_EN) != 0) &&
|
|
((statRegval & IX_ETH_MII_SR_AUTO_SEL) != 0) &&
|
|
((statRegval & IX_ETH_MII_SR_AUTO_NEG) != 0);
|
|
|
|
if (*autoneg)
|
|
{
|
|
/* mask the current stat values with the capabilities */
|
|
ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_ADS_REG, ®val4);
|
|
ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_PRTN_REG, ®val5);
|
|
/* merge the flags from the 3 registers */
|
|
regval = (statRegval & ((regval4 & regval5) << 6));
|
|
/* initialise from status register values */
|
|
if ((regval & IX_ETH_MII_SR_TX_FULL_DPX) != 0)
|
|
{
|
|
/* 100 Base X full dplx */
|
|
*speed100 = TRUE;
|
|
*fullDuplex = TRUE;
|
|
return IX_SUCCESS;
|
|
}
|
|
if ((regval & IX_ETH_MII_SR_TX_HALF_DPX) != 0)
|
|
{
|
|
/* 100 Base X half dplx */
|
|
*speed100 = TRUE;
|
|
return IX_SUCCESS;
|
|
}
|
|
if ((regval & IX_ETH_MII_SR_10T_FULL_DPX) != 0)
|
|
{
|
|
/* 10 mb full dplx */
|
|
*fullDuplex = TRUE;
|
|
return IX_SUCCESS;
|
|
}
|
|
if ((regval & IX_ETH_MII_SR_10T_HALF_DPX) != 0)
|
|
{
|
|
/* 10 mb half dplx */
|
|
return IX_SUCCESS;
|
|
}
|
|
} /* end of if(autoneg) */
|
|
else
|
|
{
|
|
/* autonegotiate not complete, return setup parameters */
|
|
*speed100 = ((ctrlRegval & IX_ETH_MII_CR_100) != 0);
|
|
*fullDuplex = ((ctrlRegval & IX_ETH_MII_CR_FDX) != 0);
|
|
}
|
|
} /* end of if(linkUp) */
|
|
} /* end of if-else(ixEthMiiPhyId) */
|
|
} /* end of if(phyAddr) */
|
|
else
|
|
{
|
|
return IX_FAIL;
|
|
} /* end of if-else(phyAddr) */
|
|
return IX_SUCCESS;
|
|
}
|
|
|
|
/*****************************************************************
|
|
*
|
|
* Link state display functions
|
|
*/
|
|
|
|
PUBLIC IX_STATUS
|
|
ixEthMiiPhyShow (UINT32 phyAddr)
|
|
{
|
|
BOOL linkUp, speed100, fullDuplex, autoneg;
|
|
UINT16 cregval;
|
|
UINT16 sregval;
|
|
|
|
|
|
ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_STAT_REG, &sregval);
|
|
ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_CTRL_REG, &cregval);
|
|
|
|
/* get link information */
|
|
if (ixEthMiiLinkStatus(phyAddr,
|
|
&linkUp,
|
|
&speed100,
|
|
&fullDuplex,
|
|
&autoneg) != IX_ETH_ACC_SUCCESS)
|
|
{
|
|
printf("PHY Status unknown\n");
|
|
return IX_FAIL;
|
|
}
|
|
|
|
printf("PHY ID [phyAddr]: %8.8x\n",ixEthMiiPhyId[phyAddr]);
|
|
printf( " Status reg: %4.4x\n",sregval);
|
|
printf( " control reg: %4.4x\n",cregval);
|
|
/* display link information */
|
|
printf("PHY Status:\n");
|
|
printf(" Link is %s\n",
|
|
(linkUp ? "Up" : "Down"));
|
|
if((sregval & IX_ETH_MII_SR_REMOTE_FAULT) != 0)
|
|
{
|
|
printf(" Remote fault detected\n");
|
|
}
|
|
printf(" Auto Negotiation %s\n",
|
|
(autoneg ? "Completed" : "Not Completed"));
|
|
|
|
printf("PHY Configuration:\n");
|
|
printf(" Speed %sMb/s\n",
|
|
(speed100 ? "100" : "10"));
|
|
printf(" %s Duplex\n",
|
|
(fullDuplex ? "Full" : "Half"));
|
|
printf(" Auto Negotiation %s\n",
|
|
(autoneg ? "Enabled" : "Disabled"));
|
|
return IX_SUCCESS;
|
|
}
|
|
|