u-boot/board/netstal/hcu4/hcu4.c
Stefan Roese b36df56115 ppc4xx: Move ppc4xx headers to powerpc include directory
This patch moves some ppc4xx related headers from the common include
directory (include/) to the powerpc specific one
(arch/powerpc/include/asm/). This way to common include directory is not
so cluttered with files.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-23 09:02:05 +02:00

198 lines
5 KiB
C

/*
*(C) Copyright 2005-2008 Netstal Maschinen AG
* Niklaus Giger (Niklaus.Giger@netstal.com)
*
* This source code is free software; you can redistribute it
* and/or modify it in source code form under the terms of the GNU
* General Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/u-boot.h>
#include "../common/nm.h"
DECLARE_GLOBAL_DATA_PTR;
#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000)
#define HCU_SLOT_ADDRESS (0x7C000000 + 0x400000)
#define HCU_DIGITAL_IO_REGISTER (0x7C000000 + 0x500000)
#define HCU_SW_INSTALL_REQUESTED 0x10
/*
* This function is run very early, out of flash, and before devices are
* initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
* init.S:init_sdram early on -- but it is not yet being used for
* anything, not even stack. So be careful.
*/
/* Attention: If you want 1 microsecs times from the external oscillator
* 0x00004051 is okay for u-boot/linux, but different from old vxworks values
* 0x00804051 causes problems with u-boot and linux!
*/
#define CPC0_CR0_VALUE 0x0030103c
#define CPC0_CR1_VALUE 0x00004051
int board_early_init_f (void)
{
/*
* Interrupt controller setup for the HCU4 board.
* Note: IRQ 0-15 405GP internally generated; high; level sensitive
* IRQ 16 405GP internally generated; low; level sensitive
* IRQ 17-24 RESERVED/UNUSED
* IRQ 31 (EXT IRQ 6) (unused)
*/
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
mtdcr(UIC0PR, 0xFFFFE000); /* set int polarities */
mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
mtdcr(CPC0_ECR, 0x60606000);
mtdcr(CPC0_EIRR, 0x7C000000);
return 0;
}
#ifdef CONFIG_BOARD_PRE_INIT
int board_pre_init (void)
{
return board_early_init_f ();
}
#endif
int sys_install_requested(void)
{
u16 ioValue = in_be16((u16 *)HCU_DIGITAL_IO_REGISTER);
return (ioValue & HCU_SW_INSTALL_REQUESTED) != 0;
}
int checkboard (void)
{
u16 boardVersReg = in_be16((u16 *)HCU_MACH_VERSIONS_REGISTER);
u16 generation = boardVersReg & 0xf0;
u16 index = boardVersReg & 0x0f;
/* Cannot be done in board_early_init */
mtdcr(CPC0_CR0, CPC0_CR0_VALUE);
/* Force /RTS to active. The board it not wired quite
* correctly to use cts/rtc flow control, so just force the
* /RST active and forget about it.
*/
writeb (readb (0xef600404) | 0x03, 0xef600404);
nm_show_print(generation, index, 0);
return 0;
}
u32 hcu_led_get(void)
{
return (~(in_be32((u32 *)GPIO0_OR)) >> 23) & 0xff;
}
/*
* hcu_led_set value to be placed into the LEDs (max 6 bit)
*/
void hcu_led_set(u32 value)
{
u32 tmp = ~value;
tmp = (tmp << 23) | 0x7FFFFF;
out_be32((u32 *)GPIO0_OR, tmp);
}
/*
* hcu_get_slot
*/
u32 hcu_get_slot(void)
{
u16 slot = in_be16((u16 *)HCU_SLOT_ADDRESS);
return slot & 0x7f;
}
/*
* get_serial_number
*/
u32 get_serial_number(void)
{
u32 serial = in_be32((u32 *)CONFIG_SYS_FLASH_BASE);
if (serial == 0xffffffff)
return 0;
return serial;
}
/*
* misc_init_r.
*/
int misc_init_r(void)
{
common_misc_init_r();
set_params_for_sw_install( sys_install_requested(), "hcu4" );
return 0;
}
phys_size_t initdram(int board_type)
{
long dram_size = 0;
u16 boardVersReg = in_be16((u16 *)HCU_MACH_VERSIONS_REGISTER);
u16 generation = boardVersReg & 0xf0;
u16 index = boardVersReg & 0x0f;
if (generation == HW_GENERATION_HCU3 && index < 0xf)
dram_size = 32 << 20; /* 32 MB - RAM */
else
dram_size = 64 << 20; /* 64 MB - RAM */
init_ppc405_sdram(dram_size);
#ifdef DEBUG
show_sdram_registers();
#endif
return dram_size;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
/*
* Hardcoded flash setup:
* Flash 0 is a non-CFI AMD AM29F040 flash, 8 bit flash / 8 bit bus.
*/
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = 1;
info->chipwidth = 1;
info->interface = FLASH_CFI_X8;
return 1;
} else
return 0;
}