u-boot/board/ronetix/imx7-cm
Ilko Iliev fdd2f359e4 imx: Add support for Ronetix's iMX7-CM board
Console boot log:

U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)
Trying to boot from MMC1

U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200)

CPU:   Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 44C
Reset cause: POR
Model: Ronetix iMX7-CM Board
Board: iMX7-CM
DRAM:  512 MiB
PMIC:  PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 0, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-05-02 12:46:54 +02:00
..
imx7-cm.c imx: Add support for Ronetix's iMX7-CM board 2021-05-02 12:46:54 +02:00
Kconfig imx: Add support for Ronetix's iMX7-CM board 2021-05-02 12:46:54 +02:00
MAINTAINERS imx: Add support for Ronetix's iMX7-CM board 2021-05-02 12:46:54 +02:00
Makefile imx: Add support for Ronetix's iMX7-CM board 2021-05-02 12:46:54 +02:00
README imx: Add support for Ronetix's iMX7-CM board 2021-05-02 12:46:54 +02:00
spl.c imx: Add support for Ronetix's iMX7-CM board 2021-05-02 12:46:54 +02:00

U-Boot for the Ronetix i.MX7-CM board

Build U-Boot
============
$ make imx7_cm_defconfig
$ make

Burn the images to a SD card
============================
$ sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
$ sudo dd if=u-boot-dtb.img  of=/dev/sdX bs=1k seek=69; sync