mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
6cc8b5db40
The RD-AC5X-32G16HVG6HLG-A0 development board main components and features include: * Main 12V/54V power supply * 270 Gbps throughput packet processor on the main board * DDR4: * SR1: 2GB DDR4 2400MT/S(1GB x 2 pcs ) with ECC(1GB x 1 pcs) * SR2: 4GB DDR4 2400MT/S(2GB x 2 pcs ) with ECC(2GB x 1 pcs) * PCB co-layout with 4GB device to support 8GB (Dual CS) requirement * 16GB eMMC (Samsung KLMAG1JETD-B041006) * 16MB SPI NOR(GD25Q127C) * 32 x 1000 Base-T interfaces * 16 x 2500 Base-T interfaces * SR1: 88E2540*4 * SR2: 88E2580*1+88E2540*2 * Six (6) x 25G Base-R SFP28 interfaces * One (1) x RJ-45 console connector, interfacing to the on board UART * One (1) x USB Type-A connector, interfacing to the USB 2.0 port (0) * One (1) x USB Type-mini B connector, interfacing to the USB 2.0 port (1) * One (1) x RJ-45 1G Base-T Management port, interfacing to the host port (shared with PCIe) Connected to 88E1512 Gigabit Ethernet Phy * One (1) x Oculink port, interfacing to the PCIe port for external CPU connection * POE 802.3AT support on Port 1 ~ Port 32, 802.3BT support on Port 33 ~ Port 48 (Microsemi PD69208T4, PD69208M or TI TPS2388,TPS23881 solution) * POE total power budget 780W * LED interfaces per network port/POE * LED interfaces (common) showing system status * PTP TC mode Supported (Reserved M.2 connector to support BC mode) Signed-off-by: Chris Packham <judge.packham@gmail.com>
81 lines
1.9 KiB
Text
81 lines
1.9 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_CPU_INIT=y
|
|
CONFIG_ARCH_MVEBU=y
|
|
CONFIG_TEXT_BASE=0x200000000
|
|
CONFIG_SYS_MALLOC_LEN=0x900000
|
|
CONFIG_TARGET_MVEBU_ALLEYCAT5=y
|
|
CONFIG_ENV_SIZE=0x10000
|
|
CONFIG_ENV_OFFSET=0x400000
|
|
CONFIG_ENV_SECT_SIZE=0x10000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="ac5-98dx35xx-rd"
|
|
CONFIG_SYS_LOAD_ADDR=0x202000000
|
|
CONFIG_SYS_MEMTEST_START=0x200800000
|
|
CONFIG_SYS_MEMTEST_END=0x200ffffff
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x200FF0000
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_FIT=y
|
|
CONFIG_BOOTDELAY=-1
|
|
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
|
|
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_ARCH_EARLY_INIT_R=y
|
|
CONFIG_ARCH_MISC_INIT=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
|
|
CONFIG_CMD_MEMTEST=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_MVEBU_BUBT=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_MAC_PARTITION=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_CLK=y
|
|
CONFIG_CLK_MVEBU=y
|
|
CONFIG_DM_PCA953X=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_SYS_I2C_MVTWSI=y
|
|
CONFIG_MISC=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_XENON=y
|
|
CONFIG_MTD=y
|
|
CONFIG_SPI_FLASH_GIGADEVICE=y
|
|
CONFIG_SPI_FLASH_MACRONIX=y
|
|
CONFIG_SPI_FLASH_SPANSION=y
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_PHY_GIGE=y
|
|
CONFIG_MVNETA=y
|
|
CONFIG_MVMDIO=y
|
|
CONFIG_PHY=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_ARMADA_8K=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_DM_RTC=y
|
|
CONFIG_DM_SCSI=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_MVEBU_A3700_SPI=y
|
|
CONFIG_DM_THERMAL=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_ASIX88179=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_RTL8152=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|