u-boot/arch/arm/mach-uniphier/clk/pll-pro4.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

109 lines
2.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2013-2014 Panasonic Corporation
* Copyright (C) 2015-2016 Socionext Inc.
*/
#include <linux/delay.h>
#include <linux/io.h>
#include "../init.h"
#include "../sc-regs.h"
#include "../sg-regs.h"
#include "pll.h"
static void vpll_init(void)
{
u32 tmp, clk_mode_axosel;
/* Set VPLL27A & VPLL27B */
tmp = readl(SG_PINMON0);
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
return;
/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
tmp = readl(SC_VPLL27ACTRL);
tmp |= 0x00000001;
writel(tmp, SC_VPLL27ACTRL);
tmp = readl(SC_VPLL27BCTRL);
tmp |= 0x00000001;
writel(tmp, SC_VPLL27BCTRL);
/* Unset VPLA_K_LD and VPLB_K_LD bit */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27BCTRL3);
/* Set VPLA_M and VPLB_M to 0x20 */
tmp = readl(SC_VPLL27ACTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
writel(tmp, SC_VPLL27BCTRL2);
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
/* Set VPLA_K and VPLB_K for AXO: 25MHz */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066666;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066666;
writel(tmp, SC_VPLL27BCTRL3);
} else {
/* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
writel(tmp, SC_VPLL27BCTRL3);
}
/* wait 1 usec */
udelay(1);
/* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
tmp = readl(SC_VPLL27ACTRL3);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27BCTRL3);
/* Unset VPLA_SNRST and VPLB_SNRST bit */
tmp = readl(SC_VPLL27ACTRL2);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27BCTRL2);
/* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
tmp = readl(SC_VPLL27ACTRL);
tmp &= ~0x00000001;
writel(tmp, SC_VPLL27ACTRL);
tmp = readl(SC_VPLL27BCTRL);
tmp &= ~0x00000001;
writel(tmp, SC_VPLL27BCTRL);
}
void uniphier_pro4_pll_init(void)
{
vpll_init();
uniphier_ld4_dpll_ssc_en();
}