mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
85da558762
Commit f11513d997
("net: phy: realtek: Add tx/rx delay config for
8211e") made the Realtek PHY driver honour the phy-mode DT property,
to set up the proper delay scheme for the RX and TX lines. A similar
change in the kernel revealed that those properties were mostly wrong.
The kernel DTs got updated over the last few months, but we were missing
out on the U-Boot version.
Just sync in the phy-mode properties from the mainline kernel,
v5.17-rc7, to avoid the breaking DT sync that late in the cycle.
This fixes Ethernet operation on the affected boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
340 lines
7.3 KiB
Text
340 lines
7.3 KiB
Text
/*
|
|
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "sun7i-a20.dtsi"
|
|
#include "sunxi-common-regulators.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "LeMaker Banana Pi";
|
|
compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart3;
|
|
serial2 = &uart7;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
green {
|
|
label = "bananapi:green:usr";
|
|
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
reg_gmac_3v3: gmac-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "gmac-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <100000>;
|
|
enable-active-high;
|
|
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&ahci {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
960000 1400000
|
|
912000 1400000
|
|
864000 1350000
|
|
720000 1250000
|
|
528000 1150000
|
|
312000 1100000
|
|
144000 1050000
|
|
>;
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac_rgmii_pins>;
|
|
phy = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
phy-supply = <®_gmac_3v3>;
|
|
status = "okay";
|
|
|
|
phy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
axp209: pmic@34 {
|
|
reg = <0x34>;
|
|
interrupt-parent = <&nmi_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ir0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ir0_rx_pin>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
vmmc-supply = <®_vcc3v3>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&otg_sram {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
vcc-pa-supply = <®_vcc3v3>;
|
|
vcc-pc-supply = <®_vcc3v3>;
|
|
vcc-pe-supply = <®_vcc3v3>;
|
|
vcc-pf-supply = <®_vcc3v3>;
|
|
vcc-pg-supply = <®_vcc3v3>;
|
|
gpio-line-names =
|
|
/* PA */
|
|
"ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
|
|
"ETXD2", "ETXD1", "ETXD0",
|
|
"ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
|
|
"ETXEN", "ETXCK", "ECRS",
|
|
"ECOL", "ETXERR", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
/* PB */
|
|
"PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
|
|
"", "USB0-DRV", "", "", "", "", "", "",
|
|
"", "", "", "", "SCL", "SDA", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
/* PC */
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
/* PD */
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
/* PE */
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
/* PF */
|
|
"SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
|
|
"SD0-D2", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
/* PG */
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
/* PH */
|
|
"TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
|
|
"", "", "SD0-DET", "", "", "", "", "",
|
|
"", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
|
|
"LED1", "", "", "", "", "", "", "",
|
|
/* PI */
|
|
"", "", "", "IO-GCLK", "", "", "", "",
|
|
"", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
|
|
"SPI-MISO", "SPI-CE1", "",
|
|
"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
|
|
"", "", "", "", "", "", "", "";
|
|
|
|
usb0_id_detect_pin: usb0-id-detect-pin {
|
|
pins = "PH4";
|
|
function = "gpio_in";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
#include "axp209.dtsi"
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
®_dcdc3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-name = "vdd-int-dll";
|
|
};
|
|
|
|
®_ldo1 {
|
|
regulator-name = "vdd-rtc";
|
|
};
|
|
|
|
®_ldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "avcc";
|
|
};
|
|
|
|
®_usb0_vbus {
|
|
status = "okay";
|
|
};
|
|
|
|
®_usb1_vbus {
|
|
status = "okay";
|
|
};
|
|
|
|
®_usb2_vbus {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pi_pins>,
|
|
<&spi0_cs0_pi_pin>,
|
|
<&spi0_cs1_pi_pin>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_ph_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart7 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart7_pi_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb0_id_detect_pin>;
|
|
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
|
|
usb0_vbus_power-supply = <&usb_power_supply>;
|
|
usb0_vbus-supply = <®_usb0_vbus>;
|
|
usb1_vbus-supply = <®_usb1_vbus>;
|
|
usb2_vbus-supply = <®_usb2_vbus>;
|
|
status = "okay";
|
|
};
|