mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
fbe127f7b5
Import updated devicetree files from the Linux v5.12 release. Besides some node and audio port renames this changes the PHY modes to either rgmii-id or rgmii-txid. From the board files the Pinephone sees a lot of updates. This also adds the long missing USB PHY property for controller 0, which allows the U-Boot PHY driver to eventually use port 0 in host mode (pending another U-Boot patch). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
413 lines
7.5 KiB
Text
413 lines
7.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
|
|
// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-a64.dtsi"
|
|
#include "sun50i-a64-cpu-opp.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "OrangePi Win/Win Plus";
|
|
compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
|
|
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
status {
|
|
label = "orangepi:green:status";
|
|
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
|
|
};
|
|
};
|
|
|
|
reg_gmac_3v3: gmac-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "gmac-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
|
|
status = "okay";
|
|
};
|
|
|
|
reg_usb1_vbus: usb1-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb1-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
|
|
status = "okay";
|
|
};
|
|
|
|
wifi_pwrseq: wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
|
|
clocks = <&rtc 1>;
|
|
clock-names = "ext_clock";
|
|
};
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec_analog {
|
|
cpvdd-supply = <®_eldo1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&dai {
|
|
status = "okay";
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&emac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <&ext_rgmii_phy>;
|
|
phy-supply = <®_gmac_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
hvcc-supply = <®_dldo1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
ext_rgmii_phy: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
|
disable-wp;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
vmmc-supply = <®_dldo2>;
|
|
vqmmc-supply = <®_dldo4>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
interrupt-parent = <&r_pio>;
|
|
interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
|
|
interrupt-names = "host-wake";
|
|
};
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_ir {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp803: pmic@3a3 {
|
|
compatible = "x-powers,axp803";
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
|
|
};
|
|
};
|
|
|
|
#include "axp803.dtsi"
|
|
|
|
&ac_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&battery_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
®_aldo1 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "afvcc-csi";
|
|
};
|
|
|
|
®_aldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
®_aldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc-pll-avcc";
|
|
};
|
|
|
|
®_dcdc1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1040000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-name = "vdd-cpux";
|
|
};
|
|
|
|
/* DCDC3 is polyphased with DCDC2 */
|
|
|
|
®_dcdc5 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
®_dcdc6 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
®_dldo1 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-hdmi-dsi";
|
|
};
|
|
|
|
®_dldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi";
|
|
};
|
|
|
|
®_dldo3 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "avdd-csi";
|
|
};
|
|
|
|
®_dldo4 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi-io";
|
|
};
|
|
|
|
®_drivevbus {
|
|
regulator-name = "usb0-vbus";
|
|
status = "okay";
|
|
};
|
|
|
|
®_eldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "cpvdd";
|
|
};
|
|
|
|
®_eldo3 {
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "dvdd-csi";
|
|
};
|
|
|
|
®_fldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-1v2-hsic";
|
|
};
|
|
|
|
/*
|
|
* The A64 chip cannot work without this regulator off, although
|
|
* it seems to be only driving the AR100 core.
|
|
* Maybe we don't still know well about CPUs domain.
|
|
*/
|
|
®_fldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-cpus";
|
|
};
|
|
|
|
®_rtc_ldo {
|
|
regulator-name = "vcc-rtc";
|
|
};
|
|
|
|
&simplefb_hdmi {
|
|
vcc-hdmi-supply = <®_dldo1>;
|
|
};
|
|
|
|
&sound {
|
|
status = "okay";
|
|
simple-audio-card,widgets = "Headphone", "Headphone Jack",
|
|
"Microphone", "Microphone Jack",
|
|
"Microphone", "Onboard Microphone";
|
|
simple-audio-card,routing =
|
|
"Left DAC", "DACL",
|
|
"Right DAC", "DACR",
|
|
"ADCL", "Left ADC",
|
|
"ADCR", "Right ADC",
|
|
"Headphone Jack", "HP",
|
|
"MIC2", "Microphone Jack",
|
|
"Onboard Microphone", "MBIAS",
|
|
"MIC1", "Onboard Microphone";
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
spi-flash@0 {
|
|
compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <80000000>;
|
|
m25p,fast-read;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
/* On debug connector */
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Bluetooth */
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
max-speed = <1500000>;
|
|
clocks = <&rtc 1>;
|
|
clock-names = "lpo";
|
|
vbat-supply = <®_dldo2>;
|
|
vddio-supply = <®_dldo4>;
|
|
device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
|
|
host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
|
|
shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
|
};
|
|
};
|
|
|
|
/* On Pi-2 connector, RTS/CTS optional */
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* On Pi-2 connector, RTS/CTS optional */
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
|
|
usb0_vbus-supply = <®_drivevbus>;
|
|
usb1_vbus-supply = <®_usb1_vbus>;
|
|
status = "okay";
|
|
};
|