mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
e210ec0181
Import updated device trees from Linux tag v5.9. This picks up new hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI files for the Pinebook and the Teres-I, since the ANX6345 bridge is now supported upstream. A couple of headers needed updates for recently-added hardware support. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
320 lines
6.3 KiB
Text
320 lines
6.3 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (C) 2018 Amarula Solutions B.V.
|
|
// Author: Jagan Teki <jagan@amarulasolutions.com>
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-a64.dtsi"
|
|
#include "sun50i-a64-cpu-opp.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Amarula A64-Relic";
|
|
compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
i2c {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
|
|
scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>;
|
|
i2c-gpio,delay-us = <5>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ov5640: camera@3c {
|
|
compatible = "ovti,ov5640";
|
|
reg = <0x3c>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&csi_mclk_pin>;
|
|
clocks = <&ccu CLK_CSI_MCLK>;
|
|
clock-names = "xclk";
|
|
|
|
AVDD-supply = <®_aldo1>;
|
|
DOVDD-supply = <®_dldo3>;
|
|
DVDD-supply = <®_eldo3>;
|
|
reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */
|
|
powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */
|
|
|
|
port {
|
|
ov5640_ep: endpoint {
|
|
remote-endpoint = <&csi_ep>;
|
|
bus-width = <8>;
|
|
hsync-active = <1>; /* Active high */
|
|
vsync-active = <0>; /* Active low */
|
|
data-active = <1>; /* Active high */
|
|
pclk-sample = <1>; /* Rising */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
wifi_pwrseq: wifi-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rtc 1>;
|
|
clock-names = "ext_clock";
|
|
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&csi {
|
|
status = "okay";
|
|
|
|
port {
|
|
csi_ep: endpoint {
|
|
remote-endpoint = <&ov5640_ep>;
|
|
bus-width = <8>;
|
|
hsync-active = <1>; /* Active high */
|
|
vsync-active = <0>; /* Active low */
|
|
data-active = <1>; /* Active high */
|
|
pclk-sample = <1>; /* Rising */
|
|
};
|
|
};
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
sensor@48 {
|
|
compatible = "st,stlm75";
|
|
reg = <0x48>;
|
|
};
|
|
};
|
|
|
|
&i2c0_pins {
|
|
bias-pull-up;
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
touchscreen@5d {
|
|
compatible = "goodix,gt5663";
|
|
reg = <0x5d>;
|
|
AVDD28-supply = <®_ldo_io0>; /* VCC-CTP: GPIO0-LDO */
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
|
|
irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */
|
|
reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */
|
|
touchscreen-inverted-x;
|
|
touchscreen-inverted-y;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
/*
|
|
* Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
|
|
* dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
|
|
* 0Ohm register to vcc-io-wifi so eldo1 is used.
|
|
*/
|
|
vqmmc-supply = <®_eldo1>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
interrupt-parent = <&r_pio>;
|
|
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* WL-WAKE-AP: PL3 */
|
|
interrupt-names = "host-wake";
|
|
};
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp803: pmic@3a3 {
|
|
compatible = "x-powers,axp803";
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
|
|
};
|
|
};
|
|
|
|
#include "axp803.dtsi"
|
|
|
|
®_aldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "avdd-csi";
|
|
};
|
|
|
|
®_aldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
®_aldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-name = "vcc-pll-avcc";
|
|
};
|
|
|
|
®_dcdc1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1040000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-name = "vdd-cpux";
|
|
};
|
|
|
|
/* DCDC3 is polyphased with DCDC2 */
|
|
|
|
®_dcdc5 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
®_dcdc6 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
®_dldo1 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-hdmi-dsi-sensor";
|
|
};
|
|
|
|
®_dldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-mipi";
|
|
};
|
|
|
|
®_dldo3 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "dovdd-csi";
|
|
};
|
|
|
|
®_dldo4 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi-io";
|
|
};
|
|
|
|
®_drivevbus {
|
|
regulator-name = "usb0-vbus";
|
|
status = "okay";
|
|
};
|
|
|
|
®_eldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "cpvdd";
|
|
};
|
|
|
|
®_eldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "dvdd-csi";
|
|
};
|
|
|
|
®_fldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-1v2-hsic";
|
|
};
|
|
|
|
/*
|
|
* The A64 chip cannot work without this regulator off, although
|
|
* it seems to be only driving the AR100 core.
|
|
* Maybe we don't still know well about CPUs domain.
|
|
*/
|
|
®_fldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-cpus";
|
|
};
|
|
|
|
®_ldo_io0 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "vcc-ctp";
|
|
status = "okay";
|
|
};
|
|
|
|
®_rtc_ldo {
|
|
regulator-name = "vcc-rtc";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
|
|
usb0_vbus-supply = <®_drivevbus>;
|
|
status = "okay";
|
|
};
|