mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
3f1250a9e2
1. Enable MTK SPI NOR controller driver on mt7622 & mt7629. 2. Enable quad mode for read and single mode for write. Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
426 lines
11 KiB
Text
426 lines
11 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2019 MediaTek Inc.
|
|
* Author: Sam Shih <sam.shih@mediatek.com>
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/mt7622-clk.h>
|
|
#include <dt-bindings/power/mt7629-power.h>
|
|
#include <dt-bindings/reset/mt7629-reset.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
/ {
|
|
compatible = "mediatek,mt7622";
|
|
interrupt-parent = <&sysirq>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0>;
|
|
clock-frequency = <1300000000>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x1>;
|
|
clock-frequency = <1300000000>;
|
|
};
|
|
};
|
|
|
|
snfi: snfi@1100d000 {
|
|
compatible = "mediatek,mtk-snfi-spi";
|
|
reg = <0x1100d000 0x2000>;
|
|
clocks = <&pericfg CLK_PERI_NFI_PD>,
|
|
<&pericfg CLK_PERI_SNFI_PD>;
|
|
clock-names = "nfi_clk", "pad_clk";
|
|
assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
|
|
<&topckgen CLK_TOP_NFI_INFRA_SEL>;
|
|
|
|
assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
|
|
<&topckgen CLK_TOP_UNIVPLL2_D8>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
snor: snor@11014000 {
|
|
compatible = "mediatek,mtk-snor";
|
|
reg = <0x11014000 0x1000>;
|
|
clocks = <&pericfg CLK_PERI_FLASH_PD>,
|
|
<&topckgen CLK_TOP_FLASH_SEL>;
|
|
clock-names = "spi", "sf";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_HIGH)>;
|
|
arm,cpu-registers-not-fw-configured;
|
|
};
|
|
|
|
timer0: timer@10004000 {
|
|
compatible = "mediatek,timer";
|
|
reg = <0x10004000 0x80>;
|
|
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&infracfg CLK_INFRA_APXGPT_PD>;
|
|
clock-names = "system-clk";
|
|
};
|
|
|
|
infracfg: infracfg@10000000 {
|
|
compatible = "mediatek,mt7622-infracfg",
|
|
"syscon";
|
|
reg = <0x10000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pericfg: pericfg@10002000 {
|
|
compatible = "mediatek,mt7622-pericfg", "syscon";
|
|
reg = <0x10002000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
scpsys: scpsys@10006000 {
|
|
compatible = "mediatek,mt7622-scpsys",
|
|
"syscon";
|
|
#power-domain-cells = <1>;
|
|
reg = <0x10006000 0x1000>;
|
|
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
|
|
infracfg = <&infracfg>;
|
|
clocks = <&topckgen CLK_TOP_HIF_SEL>;
|
|
clock-names = "hif_sel";
|
|
};
|
|
|
|
sysirq: interrupt-controller@10200620 {
|
|
compatible = "mediatek,sysirq";
|
|
reg = <0x10200620 0x20>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
apmixedsys: apmixedsys@10209000 {
|
|
compatible = "mediatek,mt7622-apmixedsys";
|
|
reg = <0x10209000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
topckgen: topckgen@10210000 {
|
|
compatible = "mediatek,mt7622-topckgen";
|
|
reg = <0x10210000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pinctrl: pinctrl@10211000 {
|
|
compatible = "mediatek,mt7622-pinctrl";
|
|
reg = <0x10211000 0x1000>;
|
|
gpio: gpio-controller {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
watchdog: watchdog@10212000 {
|
|
compatible = "mediatek,wdt";
|
|
reg = <0x10212000 0x800>;
|
|
};
|
|
|
|
wdt-reboot {
|
|
compatible = "wdt-reboot";
|
|
wdt = <&watchdog>;
|
|
};
|
|
|
|
gic: interrupt-controller@10300000 {
|
|
compatible = "arm,gic-400";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
reg = <0x10310000 0x1000>,
|
|
<0x10320000 0x1000>,
|
|
<0x10340000 0x2000>,
|
|
<0x10360000 0x2000>;
|
|
};
|
|
|
|
uart0: serial@11002000 {
|
|
compatible = "mediatek,hsuart";
|
|
reg = <0x11002000 0x400>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_UART_SEL>,
|
|
<&pericfg CLK_PERI_UART0_PD>;
|
|
clock-names = "baud", "bus";
|
|
status = "disabled";
|
|
assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
|
|
};
|
|
|
|
mmc0: mmc@11230000 {
|
|
compatible = "mediatek,mt7622-mmc";
|
|
reg = <0x11230000 0x1000>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
|
|
<&topckgen CLK_TOP_MSDC50_0_SEL>;
|
|
clock-names = "source", "hclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc1: mmc@11240000 {
|
|
compatible = "mediatek,mt7622-mmc";
|
|
reg = <0x11240000 0x1000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
|
|
<&topckgen CLK_TOP_AXI_SEL>;
|
|
clock-names = "source", "hclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
ssusbsys: ssusbsys@1a000000 {
|
|
compatible = "mediatek,mt7622-ssusbsys",
|
|
"syscon";
|
|
reg = <0x1a000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pciesys: pciesys@1a100800 {
|
|
compatible = "mediatek,mt7622-pciesys", "syscon";
|
|
reg = <0x1a100800 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pcie: pcie@1a140000 {
|
|
compatible = "mediatek,mt7622-pcie";
|
|
device_type = "pci";
|
|
reg = <0x1a140000 0x1000>,
|
|
<0x1a143000 0x1000>,
|
|
<0x1a145000 0x1000>;
|
|
reg-names = "subsys", "port0", "port1";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
|
|
<&pciesys CLK_PCIE_P1_MAC_EN>,
|
|
<&pciesys CLK_PCIE_P0_AHB_EN>,
|
|
<&pciesys CLK_PCIE_P0_AHB_EN>,
|
|
<&pciesys CLK_PCIE_P0_AUX_EN>,
|
|
<&pciesys CLK_PCIE_P1_AUX_EN>,
|
|
<&pciesys CLK_PCIE_P0_AXI_EN>,
|
|
<&pciesys CLK_PCIE_P1_AXI_EN>,
|
|
<&pciesys CLK_PCIE_P0_OBFF_EN>,
|
|
<&pciesys CLK_PCIE_P1_OBFF_EN>,
|
|
<&pciesys CLK_PCIE_P0_PIPE_EN>,
|
|
<&pciesys CLK_PCIE_P1_PIPE_EN>;
|
|
clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
|
|
"aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
|
|
"obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
|
|
power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF0>;
|
|
bus-range = <0x00 0xff>;
|
|
ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
|
|
status = "disabled";
|
|
|
|
pcie0: pcie@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
|
|
<0 0 0 2 &pcie_intc0 1>,
|
|
<0 0 0 3 &pcie_intc0 2>,
|
|
<0 0 0 4 &pcie_intc0 3>;
|
|
pcie_intc0: interrupt-controller {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
|
|
pcie1: pcie@1,0 {
|
|
reg = <0x0800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
|
|
<0 0 0 2 &pcie_intc1 1>,
|
|
<0 0 0 3 &pcie_intc1 2>,
|
|
<0 0 0 4 &pcie_intc1 3>;
|
|
pcie_intc1: interrupt-controller {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sata: sata@1a200000 {
|
|
compatible = "mediatek,mtk-ahci";
|
|
reg = <0x1a200000 0x1100>;
|
|
resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
|
|
<&pciesys MT7622_SATA_PHY_SW_RST>,
|
|
<&pciesys MT7622_SATA_PHY_REG_RST>;
|
|
reset-names = "axi", "sw", "reg";
|
|
mediatek,phy-mode = <&pciesys>;
|
|
ports-implemented = <0x1>;
|
|
phys = <&sata_port PHY_TYPE_SATA>;
|
|
phy-names = "sata-phy";
|
|
status = "okay";
|
|
};
|
|
|
|
sata_phy: sata-phy@1a243000 {
|
|
compatible = "mediatek,generic-tphy-v1";
|
|
reg = <0x1a243000 0x0100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "okay";
|
|
|
|
sata_port: sata-phy@1a243000 {
|
|
reg = <0x1a243000 0x0100>;
|
|
clocks = <&topckgen CLK_TOP_ETH_500M>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
ssusb: usb@1a0c0000 {
|
|
compatible = "mediatek,mt7622-xhci",
|
|
"mediatek,mtk-xhci";
|
|
reg = <0x1a0c0000 0x01000>,
|
|
<0x1a0c4700 0x0100>;
|
|
reg-names = "mac", "ippc";
|
|
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
|
|
power-domains = <&scpsys MT7629_POWER_DOMAIN_HIF1>;
|
|
clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
|
|
<&ssusbsys CLK_SSUSB_REF_EN>,
|
|
<&ssusbsys CLK_SSUSB_MCU_EN>,
|
|
<&ssusbsys CLK_SSUSB_DMA_EN>;
|
|
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
|
|
phys = <&u2port0 PHY_TYPE_USB2>,
|
|
<&u3port0 PHY_TYPE_USB3>,
|
|
<&u2port1 PHY_TYPE_USB2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
u3phy: usb-phy@1a0c4000 {
|
|
compatible = "mediatek,mt7622-u3phy",
|
|
"mediatek,generic-tphy-v1";
|
|
reg = <0x1a0c4000 0x700>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
u2port0: usb-phy@1a0c4800 {
|
|
reg = <0x1a0c4800 0x0100>;
|
|
#phy-cells = <1>;
|
|
clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
|
|
clock-names = "ref";
|
|
};
|
|
|
|
u3port0: usb-phy@1a0c4900 {
|
|
reg = <0x1a0c4900 0x0700>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
u2port1: usb-phy@1a0c5000 {
|
|
reg = <0x1a0c5000 0x0100>;
|
|
#phy-cells = <1>;
|
|
clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
|
|
clock-names = "ref";
|
|
};
|
|
};
|
|
|
|
ethsys: syscon@1b000000 {
|
|
compatible = "mediatek,mt7622-ethsys", "syscon";
|
|
reg = <0x1b000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
eth: ethernet@1b100000 {
|
|
compatible = "mediatek,mt7622-eth", "syscon";
|
|
reg = <0x1b100000 0x20000>;
|
|
clocks = <&topckgen CLK_TOP_ETH_SEL>,
|
|
<ðsys CLK_ETH_ESW_EN>,
|
|
<ðsys CLK_ETH_GP0_EN>,
|
|
<ðsys CLK_ETH_GP1_EN>,
|
|
<ðsys CLK_ETH_GP2_EN>,
|
|
<&sgmiisys CLK_SGMII_TX250M_EN>,
|
|
<&sgmiisys CLK_SGMII_RX250M_EN>,
|
|
<&sgmiisys CLK_SGMII_CDR_REF>,
|
|
<&sgmiisys CLK_SGMII_CDR_FB>,
|
|
<&topckgen CLK_TOP_SGMIIPLL>,
|
|
<&apmixedsys CLK_APMIXED_ETH2PLL>;
|
|
clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
|
|
"sgmii_tx250m", "sgmii_rx250m",
|
|
"sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
|
|
"eth2pll";
|
|
power-domains = <&scpsys MT7629_POWER_DOMAIN_ETHSYS>;
|
|
resets = <ðsys ETHSYS_FE_RST>;
|
|
reset-names = "fe";
|
|
mediatek,ethsys = <ðsys>;
|
|
mediatek,sgmiisys = <&sgmiisys>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sgmiisys: sgmiisys@1b128000 {
|
|
compatible = "mediatek,mt7622-sgmiisys", "syscon";
|
|
reg = <0x1b128000 0x3000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pwm: pwm@11006000 {
|
|
compatible = "mediatek,mt7622-pwm";
|
|
reg = <0x11006000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#pwm-cells = <2>;
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_PWM_SEL>,
|
|
<&pericfg CLK_PERI_PWM_PD>,
|
|
<&pericfg CLK_PERI_PWM1_PD>,
|
|
<&pericfg CLK_PERI_PWM2_PD>,
|
|
<&pericfg CLK_PERI_PWM3_PD>,
|
|
<&pericfg CLK_PERI_PWM4_PD>,
|
|
<&pericfg CLK_PERI_PWM5_PD>,
|
|
<&pericfg CLK_PERI_PWM6_PD>;
|
|
clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
|
|
"pwm5", "pwm6";
|
|
status = "disabled";
|
|
};
|
|
|
|
};
|