mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-09 04:43:29 +00:00
81fb00b884
J721S2 can support two instances for DDR. Therefore, add the device support for the same and use 4266MT/s as DDR frequency. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
198 lines
5 KiB
Text
198 lines
5 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "k3-j721s2-som-p0.dtsi"
|
|
#include "k3-j721s2-ddr-evm-lp4-4266.dtsi"
|
|
#include "k3-j721s2-ddr.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
firmware-loader = &fs_loader0;
|
|
stdout-path = &main_uart8;
|
|
tick-timer = &timer1;
|
|
};
|
|
|
|
aliases {
|
|
remoteproc0 = &sysctrler;
|
|
remoteproc1 = &a72_0;
|
|
};
|
|
|
|
fs_loader0: fs_loader@0 {
|
|
compatible = "u-boot,fs-loader";
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
a72_0: a72@0 {
|
|
compatible = "ti,am654-rproc";
|
|
reg = <0x0 0x00a90000 0x0 0x10>;
|
|
power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
|
|
<&k3_pds 202 TI_SCI_PD_EXCLUSIVE>;
|
|
resets = <&k3_reset 202 0>;
|
|
clocks = <&k3_clks 61 1>;
|
|
assigned-clocks = <&k3_clks 61 1>, <&k3_clks 202 0>;
|
|
assigned-clock-parents = <&k3_clks 61 2>;
|
|
assigned-clock-rates = <200000000>, <2000000000>;
|
|
ti,sci = <&sms>;
|
|
ti,sci-proc-id = <32>;
|
|
ti,sci-host-id = <10>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
clk_200mhz: dummy_clock_200mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <200000000>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
clk_19_2mhz: dummy_clock_19_2mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&cbass_mcu_wakeup {
|
|
sa3_secproxy: secproxy@44880000 {
|
|
u-boot,dm-spl;
|
|
compatible = "ti,am654-secure-proxy";
|
|
reg = <0x0 0x44880000 0x0 0x20000>,
|
|
<0x0 0x44860000 0x0 0x20000>,
|
|
<0x0 0x43600000 0x0 0x10000>;
|
|
reg-names = "rt", "scfg", "target_data";
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
mcu_secproxy: secproxy@2a380000 {
|
|
compatible = "ti,am654-secure-proxy";
|
|
reg = <0x0 0x2a380000 0x0 0x80000>,
|
|
<0x0 0x2a400000 0x0 0x80000>,
|
|
<0x0 0x2a480000 0x0 0x80000>;
|
|
reg-names = "rt", "scfg", "target_data";
|
|
#mbox-cells = <1>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
sysctrler: sysctrler {
|
|
compatible = "ti,am654-system-controller";
|
|
mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>, <&sa3_secproxy 5>;
|
|
mbox-names = "tx", "rx", "boot_notify";
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
dm_tifs: dm-tifs {
|
|
compatible = "ti,j721e-dm-sci";
|
|
ti,host-id = <3>;
|
|
ti,secure-host;
|
|
mbox-names = "rx", "tx";
|
|
mboxes= <&mcu_secproxy 21>,
|
|
<&mcu_secproxy 23>;
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
main_uart8_pins_default: main-uart8-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721S2_IOPAD(0x040, PIN_INPUT, 14) /* (AC28) MCASP0_AXR0.UART8_CTSn */
|
|
J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */
|
|
J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
|
|
J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
|
|
>;
|
|
};
|
|
|
|
main_mmc1_pins_default: main-mmc1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
|
|
J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
|
|
J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
|
|
J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
|
|
J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
|
|
J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
|
|
J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
|
|
J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&wkup_pmx0 {
|
|
mcu_uart0_pins_default: mcu-uart0-pins-default {
|
|
u-boot,dm-spl;
|
|
pinctrl-single,pins = <
|
|
J721S2_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */
|
|
J721S2_WKUP_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */
|
|
J721S2_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
|
|
J721S2_WKUP_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
|
|
>;
|
|
};
|
|
|
|
wkup_uart0_pins_default: wkup-uart0-pins-default {
|
|
u-boot,dm-spl;
|
|
pinctrl-single,pins = <
|
|
J721S2_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
|
|
J721S2_WKUP_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
|
|
J721S2_WKUP_IOPAD(0x0b0, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
|
|
J721S2_WKUP_IOPAD(0x0b4, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&sms {
|
|
mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
|
|
mbox-names = "tx", "rx", "notify";
|
|
ti,host-id = <4>;
|
|
ti,secure-host;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&wkup_uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wkup_uart0_pins_default>;
|
|
};
|
|
|
|
&mcu_uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcu_uart0_pins_default>;
|
|
};
|
|
|
|
&main_uart8 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_uart8_pins_default>;
|
|
};
|
|
|
|
&main_sdhci0 {
|
|
/delete-property/ power-domains;
|
|
/delete-property/ assigned-clocks;
|
|
/delete-property/ assigned-clock-parents;
|
|
clock-names = "clk_xin";
|
|
clocks = <&clk_200mhz>;
|
|
ti,driver-strength-ohm = <50>;
|
|
non-removable;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&main_sdhci1 {
|
|
/delete-property/ power-domains;
|
|
/delete-property/ assigned-clocks;
|
|
/delete-property/ assigned-clock-parents;
|
|
pinctrl-0 = <&main_mmc1_pins_default>;
|
|
pinctrl-names = "default";
|
|
clock-names = "clk_xin";
|
|
clocks = <&clk_200mhz>;
|
|
ti,driver-strength-ohm = <50>;
|
|
};
|
|
|
|
&mcu_ringacc {
|
|
ti,sci = <&dm_tifs>;
|
|
};
|
|
|
|
&mcu_udmap {
|
|
ti,sci = <&dm_tifs>;
|
|
};
|
|
|
|
#include "k3-j721s2-common-proc-board-u-boot.dtsi"
|