mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
edaec53212
Ever since the conversion to DM PCI, the board was missing the PCIe DT nodes, hence the PCI did not really work. Fill in the DT nodes and add missing PCIe device reset. Moreover, bring the PCIe power domain up before booting Linux. This is mandatory to keep old broken vendor kernels working, as they do not do so and depend on the bootloader to bring the power domain up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
595 lines
13 KiB
Text
595 lines
13 KiB
Text
/*
|
|
* Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "imx6sx.dtsi"
|
|
|
|
/ {
|
|
model = "Softing VIN|ING 2000";
|
|
compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
|
|
|
|
aliases {
|
|
mmc0 = &usdhc4;
|
|
mmc1 = &usdhc2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x40000000>;
|
|
};
|
|
|
|
reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_otg1_vbus";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_otg1>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_peri_3v3: regulator-peri_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "peri_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
|
|
red {
|
|
label = "red";
|
|
max-brightness = <255>;
|
|
pwms = <&pwm6 0 50000>;
|
|
};
|
|
|
|
green {
|
|
label = "green";
|
|
max-brightness = <255>;
|
|
pwms = <&pwm2 0 50000>;
|
|
};
|
|
|
|
blue {
|
|
label = "blue";
|
|
max-brightness = <255>;
|
|
pwms = <&pwm1 0 50000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc1 {
|
|
vref-supply = <®_peri_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
/*
|
|
* This board has a shared rail of reg_arm and reg_soc (supplied by
|
|
* sw1a_reg) which is modeled below, but still this module behaves
|
|
* unstable without higher voltages. Hence, set higher voltages here.
|
|
*/
|
|
operating-points = <
|
|
/* kHz uV */
|
|
996000 1250000
|
|
792000 1175000
|
|
396000 1175000
|
|
198000 1175000
|
|
>;
|
|
fsl,soc-operating-points = <
|
|
/* ARM kHz SOC uV */
|
|
996000 1250000
|
|
792000 1175000
|
|
396000 1175000
|
|
198000 1175000
|
|
>;
|
|
};
|
|
|
|
&ecspi4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi4>;
|
|
cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet1>;
|
|
phy-supply = <®_peri_3v3>;
|
|
phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
|
|
phy-reset-duration = <5>;
|
|
phy-mode = "rmii";
|
|
phy-handle = <ðphy0>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet0-phy@0 {
|
|
reg = <0>;
|
|
max-speed = <100>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet2>;
|
|
phy-supply = <®_peri_3v3>;
|
|
phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
|
|
phy-reset-duration = <5>;
|
|
phy-mode = "rmii";
|
|
phy-handle = <ðphy1>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy1: ethernet1-phy@0 {
|
|
reg = <0>;
|
|
max-speed = <100>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&flexcan1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&flexcan2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
proximity: sx9500@28 {
|
|
compatible = "semtech,sx9500";
|
|
reg = <0x28>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sx9500>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
pmic: pfuze100@8 {
|
|
compatible = "fsl,pfuze200";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1ab {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3a {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3b_reg: sw3b {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: vgen4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vgen5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vgen6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
};
|
|
|
|
®_pcie {
|
|
regulator-always-on;
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
|
reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpios>;
|
|
|
|
pinctrl_ecspi4: ecspi4grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x130b1
|
|
MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x130b1
|
|
MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x130b1
|
|
MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x30b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet1: enet1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x30c1
|
|
MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x30c1
|
|
MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0f9
|
|
MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0f9
|
|
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x30c1
|
|
MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0f9
|
|
MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4000a038
|
|
/* LAN8720 PHY Reset */
|
|
MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x10b0
|
|
/* MDIO */
|
|
MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0f9
|
|
MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0f9
|
|
/* IRQ from PHY */
|
|
MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x10b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet2: enet2grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x1b0b0
|
|
MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x1b0b0
|
|
MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x1b0b0
|
|
MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x1b0b0
|
|
MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x1b0b0
|
|
MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x1b0b0
|
|
MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4000a038
|
|
/* LAN8720 PHY Reset */
|
|
MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x10b0
|
|
/* MDIO */
|
|
MX6SX_PAD_ENET1_COL__ENET2_MDC 0xa0f9
|
|
MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0xa0f9
|
|
/* IRQ from PHY */
|
|
MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x10b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan1: flexcan1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
|
|
MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2: flexcan2grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
|
|
MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpios: gpiosgrp {
|
|
fsl,pins = <
|
|
/* reset external uC */
|
|
MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x10b0
|
|
/* IRQ from external uC */
|
|
MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x10b0
|
|
/* overcurrent detection */
|
|
MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x10b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
|
|
MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_NAND_ALE__I2C3_SDA 0x4001b8b1
|
|
MX6SX_PAD_NAND_CLE__I2C3_SCL 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie: pciegrp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x10b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp-1 {
|
|
fsl,pins = <
|
|
/* blue LED */
|
|
MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm2: pwm2grp-1 {
|
|
fsl,pins = <
|
|
/* green LED */
|
|
MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm6: pwm6grp-1 {
|
|
fsl,pins = <
|
|
/* red LED */
|
|
MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_sx9500: sx9500grp {
|
|
fsl,pins = <
|
|
/* Reset */
|
|
MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x838
|
|
/* IRQ */
|
|
MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x70e0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
|
|
MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
|
|
MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg1: usbotg1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg1_id: usbotg1idgrp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
|
|
MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
|
|
MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
|
|
MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
|
|
MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
|
|
MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
|
|
MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x1b000
|
|
MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x10b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100b9
|
|
MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170b9
|
|
MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170b9
|
|
MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170b9
|
|
MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170b9
|
|
MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100f9
|
|
MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170f9
|
|
MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170f9
|
|
MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170f9
|
|
MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170f9
|
|
MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
|
|
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
|
|
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
|
|
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
|
|
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
|
|
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
|
|
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059
|
|
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059
|
|
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059
|
|
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059
|
|
MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17068
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc4_100mhz: usdhc4-100mhz {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
|
|
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
|
|
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
|
|
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
|
|
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
|
|
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
|
|
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
|
|
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
|
|
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
|
|
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc4_200mhz: usdhc4-200mhz {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
|
|
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
|
|
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
|
|
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
|
|
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
|
|
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
|
|
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
|
|
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
|
|
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
|
|
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
|
|
>;
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm6 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm6>;
|
|
status = "okay";
|
|
};
|
|
|
|
®_arm {
|
|
vin-supply = <&sw1a_reg>;
|
|
};
|
|
|
|
®_soc {
|
|
vin-supply = <&sw1a_reg>;
|
|
};
|
|
|
|
&snvs_poweroff {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
vbus-supply = <®_usb_otg1_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_otg1_id>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2_50mhz>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
|
cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
|
|
keep-power-in-suspend;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc4 {
|
|
/* hs200-mode is currently unsupported because Vccq is on 3.1V, but
|
|
* not on necessary 1.8V.
|
|
*/
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
|
|
pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
|
|
bus-width = <8>;
|
|
keep-power-in-suspend;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
status = "okay";
|
|
};
|