mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-09 12:52:50 +00:00
acdbe52674
The device trees for TQMa6x SOM support variations in - CPU type: imx6dl- or imx6q- - MBa6 I2C bus access: -mba6a (i2c1) or -mba6b (i2c3) (plus the respective common/module include trees) - USBH1 is directly connected to a hub - USBOTG is connected to a separate connector and can act as host/device or full OTG port. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
207 lines
5.3 KiB
Text
207 lines
5.3 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Copyright (C) 2020 TQ-Systems GmbH
|
|
|
|
/ {
|
|
aliases {
|
|
mmc1 = &usdhc2;
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = &uart2;
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
regulators {
|
|
reg_mba6_3p3v: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "supply-mba6-3p3v";
|
|
reg = <1>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_otgvbus: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_otgpwr>;
|
|
regulator-name = "otg-vbus-supply";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin_supply = <®_3p3v>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
phy-mode = "rgmii-id";
|
|
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
|
phy-reset-duration = <1>;
|
|
phy-reset-post-delay = <100>;
|
|
phy-handle = <ðphy>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy: ethernet-phy@3 {
|
|
compatible = "ethernet-phy-id0022.1622",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
reg = <3>;
|
|
force-master;
|
|
max-speed = <1000>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
mba6 {
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
/* FEC phy IRQ */
|
|
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x00011008
|
|
/* FEC phy reset */
|
|
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b099
|
|
/* DSE = 100, 100k up, SPEED = MED */
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0xb0a0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0xb0a0
|
|
/* DSE = 111, pull 100k up */
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0xb038
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0xb038
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0xb038
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0xb038
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0xb038
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
|
|
/* DSE = 111, pull external */
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x0038
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x0038
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x0038
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x0038
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x0038
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
|
|
/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0f0
|
|
>;
|
|
};
|
|
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b099 /* LCD.PWR_EN */
|
|
MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0001b099 /* LCD.RESET */
|
|
/* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
|
|
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
|
|
|
|
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
|
|
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
|
|
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
|
|
|
|
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
|
|
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
|
|
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
|
|
MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
|
|
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
|
|
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
|
|
MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
|
|
|
|
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
|
|
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
|
|
MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
|
|
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
|
|
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
|
|
|
|
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
|
|
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
|
|
MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
|
|
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
|
|
|
|
MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
|
|
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
|
|
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
|
|
|
|
MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
|
|
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
|
|
>;
|
|
};
|
|
|
|
pinctrl_reg_otgpwr: regotgpwrgrp {
|
|
fsl,pins = <
|
|
/* OTG_PWR */
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b099
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00017071
|
|
/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017059
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
|
|
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */
|
|
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x00017059
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
dr_mode = "otg";
|
|
vbus-supply = <®_otgvbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 { /* Baseboard Slot */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
vmmc-supply = <®_mba6_3p3v>;
|
|
bus-width = <4>;
|
|
no-1-8-v;
|
|
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
status = "okay";
|
|
};
|