mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
827bed4456
Move all aliases defintions into the main dts file Add u-boot definiton to i2c0 based on clearfog set spi1 status to okay Signed-off-by: Dennis Gilmore <dennis@ausil.us>
320 lines
6.6 KiB
Text
320 lines
6.6 KiB
Text
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Device Tree file for Helios4
|
|
* based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
|
|
*
|
|
* Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "armada-388.dtsi"
|
|
#include "armada-38x-solidrun-microsom.dtsi"
|
|
|
|
/ {
|
|
model = "Helios4";
|
|
compatible = "kobol,helios4", "marvell,armada388",
|
|
"marvell,armada385", "marvell,armada380";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x80000000>; /* 2 GB */
|
|
};
|
|
|
|
aliases {
|
|
/* So that mvebu u-boot can update the MAC address */
|
|
ethernet1 = ð0;
|
|
spi1 = &spi1;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
};
|
|
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
reg_12v: regulator-12v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "power_brick_12V";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_12v>;
|
|
};
|
|
|
|
reg_5p0v_hdd: regulator-5v-hdd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V_HDD";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_12v>;
|
|
};
|
|
|
|
reg_5p0v_usb: regulator-5v-usb {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "USB-PWR";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
enable-active-high;
|
|
gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <®_12v>;
|
|
};
|
|
|
|
system-leds {
|
|
compatible = "gpio-leds";
|
|
status-led {
|
|
label = "helios4:green:status";
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "on";
|
|
};
|
|
|
|
fault-led {
|
|
label = "helios4:red:fault";
|
|
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
|
default-state = "keep";
|
|
};
|
|
};
|
|
|
|
io-leds {
|
|
compatible = "gpio-leds";
|
|
sata1-led {
|
|
label = "helios4:green:ata1";
|
|
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "ata1";
|
|
default-state = "off";
|
|
};
|
|
sata2-led {
|
|
label = "helios4:green:ata2";
|
|
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "ata2";
|
|
default-state = "off";
|
|
};
|
|
sata3-led {
|
|
label = "helios4:green:ata3";
|
|
gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "ata3";
|
|
default-state = "off";
|
|
};
|
|
sata4-led {
|
|
label = "helios4:green:ata4";
|
|
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "ata4";
|
|
default-state = "off";
|
|
};
|
|
usb-led {
|
|
label = "helios4:green:usb";
|
|
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "usb-host";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
fan1: j10-pwm {
|
|
compatible = "pwm-fan";
|
|
pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */
|
|
};
|
|
|
|
fan2: j17-pwm {
|
|
compatible = "pwm-fan";
|
|
pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */
|
|
};
|
|
|
|
usb2_phy: usb2-phy {
|
|
compatible = "usb-nop-xceiv";
|
|
vbus-regulator = <®_5p0v_usb>;
|
|
};
|
|
|
|
usb3_phy: usb3-phy {
|
|
compatible = "usb-nop-xceiv";
|
|
};
|
|
|
|
soc {
|
|
internal-regs {
|
|
i2c@11000 {
|
|
/*
|
|
* PCA9655 GPIO expander, up to 1MHz clock.
|
|
* 0-Board Revision bit 0 #
|
|
* 1-Board Revision bit 1 #
|
|
* 5-USB3 overcurrent
|
|
* 6-USB3 power
|
|
*/
|
|
expander0: gpio-expander@20 {
|
|
/*
|
|
* This is how it should be:
|
|
* compatible = "onnn,pca9655",
|
|
* "nxp,pca9555";
|
|
* but you can't do this because of
|
|
* the way I2C works.
|
|
*/
|
|
compatible = "nxp,pca9555";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0x20>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pca0_pins>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
board_rev_bit_0 {
|
|
gpio-hog;
|
|
gpios = <0 GPIO_ACTIVE_LOW>;
|
|
input;
|
|
line-name = "board-rev-0";
|
|
};
|
|
board_rev_bit_1 {
|
|
gpio-hog;
|
|
gpios = <1 GPIO_ACTIVE_LOW>;
|
|
input;
|
|
line-name = "board-rev-1";
|
|
};
|
|
usb3_ilimit {
|
|
gpio-hog;
|
|
gpios = <5 GPIO_ACTIVE_HIGH>;
|
|
input;
|
|
line-name = "usb-overcurrent-status";
|
|
};
|
|
};
|
|
|
|
temp_sensor: temp@4c {
|
|
compatible = "ti,lm75";
|
|
reg = <0x4c>;
|
|
vcc-supply = <®_3p3v>;
|
|
};
|
|
};
|
|
|
|
i2c@11100 {
|
|
/*
|
|
* External I2C Bus for user peripheral
|
|
*/
|
|
clock-frequency = <400000>;
|
|
pinctrl-0 = <&helios_i2c1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
sata@a8000 {
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata0: sata-port@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
sata1: sata-port@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
sata@e0000 {
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata2: sata-port@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
sata3: sata-port@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
spi@10680 {
|
|
pinctrl-0 = <&spi1_pins
|
|
µsom_spi1_cs_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
|
no-1-8-v;
|
|
pinctrl-0 = <&helios_sdhci_pins
|
|
&helios_sdhci_cd_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
vmmc = <®_3p3v>;
|
|
wp-inverted;
|
|
};
|
|
|
|
usb@58000 {
|
|
usb-phy = <&usb2_phy>;
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@f0000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@f8000 {
|
|
status = "okay";
|
|
};
|
|
|
|
pinctrl@18000 {
|
|
pca0_pins: pca0-pins {
|
|
marvell,pins = "mpp23";
|
|
marvell,function = "gpio";
|
|
};
|
|
microsom_phy0_int_pins: microsom-phy0-int-pins {
|
|
marvell,pins = "mpp18";
|
|
marvell,function = "gpio";
|
|
};
|
|
helios_i2c1_pins: i2c1-pins {
|
|
marvell,pins = "mpp26", "mpp27";
|
|
marvell,function = "i2c1";
|
|
};
|
|
helios_sdhci_cd_pins: helios-sdhci-cd-pins {
|
|
marvell,pins = "mpp20";
|
|
marvell,function = "gpio";
|
|
};
|
|
helios_sdhci_pins: helios-sdhci-pins {
|
|
marvell,pins = "mpp21", "mpp28",
|
|
"mpp37", "mpp38",
|
|
"mpp39", "mpp40";
|
|
marvell,function = "sd0";
|
|
};
|
|
helios_led_pins: helios-led-pins {
|
|
marvell,pins = "mpp24", "mpp25",
|
|
"mpp49", "mpp50",
|
|
"mpp52", "mpp53",
|
|
"mpp54";
|
|
marvell,function = "gpio";
|
|
};
|
|
helios_fan_pins: helios-fan-pins {
|
|
marvell,pins = "mpp41", "mpp43",
|
|
"mpp48", "mpp55";
|
|
marvell,function = "gpio";
|
|
};
|
|
microsom_spi1_cs_pins: spi1-cs-pins {
|
|
marvell,pins = "mpp59";
|
|
marvell,function = "spi1";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&w25q32 {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
};
|