mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
6337d53fdf
There have been several changes to the am33xx.dtsi, so this patch re-syncs it with Linux. Let's add proper interconnect hierarchy for l4 interconnect instances with the related ti-sysc interconnect module data as documented in Documentation/devicetree/bindings/bus/ti-sysc.txt of the Linux kernel. With l4 interconnect hierarchy and ti-sysc interconnect target module data in place, we can simply move all the related child devices to their proper location and enable probing using ti-sysc. The am33xx-clock.dtsi file is the same as that of the Linux kernel, except for the reg property of the node l4-wkup-clkctrl@0. As for the am33xx.dtsi file, all the devices with drivers not yet implemented and those I was able to test with this patch have been moved to am33xx-l4.dtsi. In case of any regressions, problem devices can be reverted by moving them back and removing the related interconnect target module node. Signed-off-by: Dario Binacchi <dariobin@libero.it>
575 lines
13 KiB
Text
575 lines
13 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* support for the bosch am335x based shc c3 board
|
|
*
|
|
* Copyright, (C) 2015 Heiko Schocher <hs@denx.de>
|
|
*
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "am33xx.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Bosch SHC";
|
|
compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
|
|
|
|
aliases {
|
|
mmcblk0 = &mmc1;
|
|
mmcblk1 = &mmc2;
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
/*
|
|
* To consider voltage drop between PMIC and SoC,
|
|
* tolerance value is reduced to 2% from 4% and
|
|
* voltage value is increased as a precaution.
|
|
*/
|
|
operating-points = <
|
|
/* kHz uV */
|
|
594000 1225000
|
|
294000 1125000
|
|
>;
|
|
voltage-tolerance = <2>; /* 2 percentage */
|
|
cpu0-supply = <&dcdc2_reg>;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
|
|
back_button {
|
|
label = "Back Button";
|
|
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_BACK>;
|
|
debounce-interval = <1000>;
|
|
wakeup-source;
|
|
};
|
|
|
|
front_button {
|
|
label = "Front Button";
|
|
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_FRONT>;
|
|
debounce-interval = <1000>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&user_leds_s0>;
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
led1 {
|
|
label = "shc:power:red";
|
|
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led2 {
|
|
label = "shc:power:bl";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "timer";
|
|
default-state = "on";
|
|
};
|
|
|
|
led3 {
|
|
label = "shc:lan:red";
|
|
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led4 {
|
|
label = "shc:lan:bl";
|
|
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led5 {
|
|
label = "shc:cloud:red";
|
|
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led6 {
|
|
label = "shc:cloud:bl";
|
|
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x20000000>; /* 512 MB */
|
|
};
|
|
|
|
vmmcsd_fixed: fixedregulator0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmcsd_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&aes {
|
|
status = "okay";
|
|
};
|
|
|
|
&cppi41dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&davinci_mdio {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&davinci_mdio_default>;
|
|
pinctrl-1 = <&davinci_mdio_sleep>;
|
|
status = "okay";
|
|
|
|
ethernetphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
smsc,disable-energy-detect;
|
|
};
|
|
};
|
|
|
|
&epwmss1 {
|
|
status = "okay";
|
|
|
|
ehrpwm1: pwm@200 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ehrpwm1_pins>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&gpio1 {
|
|
hmtc_rst {
|
|
gpio-hog;
|
|
gpios = <24 GPIO_ACTIVE_LOW>;
|
|
output-high;
|
|
line-name = "homematic_reset";
|
|
};
|
|
|
|
hmtc_prog {
|
|
gpio-hog;
|
|
gpios = <27 GPIO_ACTIVE_LOW>;
|
|
output-high;
|
|
line-name = "homematic_program";
|
|
};
|
|
};
|
|
|
|
&gpio3 {
|
|
zgb_rst {
|
|
gpio-hog;
|
|
gpios = <18 GPIO_ACTIVE_LOW>;
|
|
output-low;
|
|
line-name = "zigbee_reset";
|
|
};
|
|
|
|
zgb_boot {
|
|
gpio-hog;
|
|
gpios = <19 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "zigbee_boot";
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tps: tps@24 {
|
|
reg = <0x24>;
|
|
};
|
|
|
|
at24@50 {
|
|
compatible = "atmel,24c32";
|
|
pagesize = <32>;
|
|
reg = <0x50>;
|
|
};
|
|
|
|
pcf8563@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy-mode = "mii";
|
|
phy-handle = <ðernetphy0>;
|
|
};
|
|
|
|
&mac {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&cpsw_default>;
|
|
pinctrl-1 = <&cpsw_sleep>;
|
|
status = "okay";
|
|
slaves = <1>;
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
bus-width = <0x4>;
|
|
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
|
|
cd-inverted;
|
|
max-frequency = <26000000>;
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_pins>;
|
|
bus-width = <8>;
|
|
max-frequency = <26000000>;
|
|
sd-uhs-sdr25;
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc3_pins>;
|
|
bus-width = <4>;
|
|
cap-power-off-card;
|
|
max-frequency = <26000000>;
|
|
sd-uhs-sdr25;
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
ti,no-init;
|
|
};
|
|
|
|
&sham {
|
|
status = "okay";
|
|
};
|
|
|
|
&tps {
|
|
compatible = "ti,tps65217";
|
|
ti,pmic-shutdown-controller;
|
|
|
|
regulators {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dcdc1_reg: regulator@0 {
|
|
reg = <0>;
|
|
regulator-name = "vdds_dpr";
|
|
regulator-compatible = "dcdc1";
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc2_reg: regulator@1 {
|
|
reg = <1>;
|
|
/*
|
|
* VDD_MPU voltage limits 0.95V - 1.26V with
|
|
* +/-4% tolerance
|
|
*/
|
|
regulator-compatible = "dcdc2";
|
|
regulator-name = "vdd_mpu";
|
|
regulator-min-microvolt = <925000>;
|
|
regulator-max-microvolt = <1375000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <70000>;
|
|
};
|
|
|
|
dcdc3_reg: regulator@2 {
|
|
reg = <2>;
|
|
/*
|
|
* VDD_CORE voltage limits 0.95V - 1.1V with
|
|
* +/-4% tolerance
|
|
*/
|
|
regulator-name = "vdd_core";
|
|
regulator-compatible = "dcdc3";
|
|
regulator-min-microvolt = <925000>;
|
|
regulator-max-microvolt = <1125000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: regulator@3 {
|
|
reg = <3>;
|
|
regulator-name = "vio,vrtc,vdds";
|
|
regulator-compatible = "ldo1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: regulator@4 {
|
|
reg = <4>;
|
|
regulator-name = "vdd_3v3aux";
|
|
regulator-compatible = "ldo2";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: regulator@5 {
|
|
reg = <5>;
|
|
regulator-name = "vdd_1v8";
|
|
regulator-compatible = "ldo3";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: regulator@6 {
|
|
reg = <6>;
|
|
regulator-name = "vdd_3v3a";
|
|
regulator-compatible = "ldo4";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_ctrl_mod {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&am33xx_pinmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&clkout2_pin>;
|
|
|
|
clkout2_pin: pinmux_clkout2_pin {
|
|
pinctrl-single,pins = <
|
|
/* xdma_event_intr1.clkout2 */
|
|
AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
|
|
>;
|
|
};
|
|
|
|
cpsw_default: cpsw_default {
|
|
pinctrl-single,pins = <
|
|
/* Slave 1 */
|
|
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
cpsw_sleep: cpsw_sleep {
|
|
pinctrl-single,pins = <
|
|
/* Slave 1 reset value */
|
|
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_default: davinci_mdio_default {
|
|
pinctrl-single,pins = <
|
|
/* mdio_data.mdio_data */
|
|
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
|
|
/* mdio_clk.mdio_clk */
|
|
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_sleep: davinci_mdio_sleep {
|
|
pinctrl-single,pins = <
|
|
/* MDIO reset value */
|
|
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
ehrpwm1_pins: pinmux_ehrpwm1 {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
|
|
>;
|
|
};
|
|
|
|
emmc_pins: pinmux_emmc_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
|
|
AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
|
|
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
|
|
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
|
|
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
|
|
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
|
|
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
|
|
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
|
|
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
|
|
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
|
|
>;
|
|
};
|
|
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
|
|
AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
|
|
>;
|
|
};
|
|
|
|
mmc3_pins: pinmux_mmc3_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
|
|
AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
|
|
AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
|
|
AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
|
|
AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
|
|
AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
|
|
>;
|
|
};
|
|
|
|
uart0_pins: pinmux_uart0_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
|
|
AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
uart1_pins: pinmux_uart1 {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
|
|
AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
|
|
AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
|
|
AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
uart2_pins: pinmux_uart2_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
|
|
AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
|
|
>;
|
|
};
|
|
|
|
uart4_pins: pinmux_uart4_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
|
|
AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
|
|
>;
|
|
};
|
|
|
|
user_leds_s0: user_leds_s0 {
|
|
pinctrl-single,pins = <
|
|
AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
|
|
AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
|
|
AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
|
|
AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
|
|
AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
>;
|
|
};
|
|
};
|