mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
134 lines
3.4 KiB
C
134 lines
3.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2017 General Electric Company
|
|
*
|
|
* Based on board/freescale/mx53loco/mx53loco_video.c:
|
|
*
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
* Fabio Estevam <fabio.estevam@freescale.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/list.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/iomux-mx53.h>
|
|
#include <linux/fb.h>
|
|
#include <ipu_pixfmt.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/io.h>
|
|
#include <pwm.h>
|
|
#include "ppd_gpio.h"
|
|
|
|
#define MX53PPD_LCD_POWER IMX_GPIO_NR(3, 24)
|
|
|
|
static struct fb_videomode const nv_spwg = {
|
|
.name = "NV-SPWGRGB888",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 15384,
|
|
.left_margin = 16,
|
|
.right_margin = 210,
|
|
.upper_margin = 10,
|
|
.lower_margin = 22,
|
|
.hsync_len = 30,
|
|
.vsync_len = 13,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
};
|
|
|
|
void setup_iomux_lcd(void)
|
|
{
|
|
static const iomux_v3_cfg_t lcd_pads[] = {
|
|
MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
|
|
MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
|
|
MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
|
|
MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
|
|
MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
|
|
MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
|
|
MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
|
|
MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
|
|
MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
|
|
MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
|
|
MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
|
|
MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
|
|
MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
|
|
MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
|
|
MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
|
|
MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
|
|
MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
|
|
MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
|
|
MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
|
|
MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
|
|
MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
|
|
MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
|
|
MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
|
|
MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
|
|
MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
|
|
MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
|
|
MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
|
|
MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
|
|
}
|
|
|
|
static void lcd_enable(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
/* Set LDB_DI0 as clock source for IPU_DI0 */
|
|
clrsetbits_le32(&mxc_ccm->cscmr2,
|
|
MXC_CCM_CSCMR2_DI0_CLK_SEL_MASK,
|
|
MXC_CCM_CSCMR2_DI0_CLK_SEL(
|
|
MXC_CCM_CSCMR2_DI0_CLK_SEL_LDB_DI0_CLK));
|
|
|
|
/* Turn on IPU LDB DI0 clocks */
|
|
setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_LDB_DI0(3));
|
|
|
|
/* Turn on IPU DI0 clocks */
|
|
setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_IPU_DI0(3));
|
|
|
|
/* Configure LDB */
|
|
writel(IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
|
|
IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
|
|
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
|
|
&iomux->gpr[2]);
|
|
|
|
/* Enable backlights */
|
|
pwm_init(1, 0, 0);
|
|
|
|
/* duty cycle 5000000ns, period: 5000000ns */
|
|
pwm_config(1, 5000000, 5000000);
|
|
|
|
/* Backlight Power */
|
|
gpio_direction_output(BACKLIGHT_ENABLE, 1);
|
|
|
|
pwm_enable(1);
|
|
}
|
|
|
|
static int do_lcd_enable(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
lcd_enable();
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
ppd_lcd_enable, 1, 1, do_lcd_enable,
|
|
"enable PPD LCD",
|
|
"no parameters"
|
|
);
|
|
|
|
int board_video_skip(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = ipuv3_fb_init(&nv_spwg, 0, IPU_PIX_FMT_RGB24);
|
|
if (ret)
|
|
printf("Display cannot be configured: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|