u-boot/arch/arm/mach-stm32mp/spl.c
Patrick Delaunay 11dfd1a331 stm32mp1: select boot device and partition
Bootrom loads SPL from SDCARD or eMMC
according BootPin selection.

Then SPL loads U-Boot on the same mmc device
with the following predefined GPT partitioning:

on SDCARD: gpt partitioning
  1: SPL
  2: SPL#2
  3: U-Boot
  4: bootable partition

on eMMC:
  The 2 boot partitions are used for SPL (2 copy)
    boot1: SPL
    boot2: SPL#2
  The user partition use gpt partitioning
    1: U-Boot
    2: bootable partition

This patch select the correct SPL partition
(3 for SDCARD on mmc0 and 1 for eMMC on mmc1)
according the BootRom information saved in TAMP register
and based on configuration flasg:
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
  => for BOOT_DEVICE_MMC1 or mmc 0 in U-Boot
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2 (new)
  => for BOOT_DEVICE_MMC2 or mmc 1 in U-Boot

And the correct boot_targets is selected according the environment
variables boot_device and boot_instance, with preboot command,
to search the bootable partition with kernel on this device
(generic distro support).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06 20:45:28 -04:00

90 lines
1.7 KiB
C

/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
*/
#include <common.h>
#include <dm.h>
#include <spl.h>
#include <asm/io.h>
u32 spl_boot_device(void)
{
u32 boot_mode;
boot_mode = (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
TAMP_BOOT_MODE_SHIFT;
clrsetbits_le32(TAMP_BOOT_CONTEXT,
TAMP_BOOT_MODE_MASK,
boot_mode << TAMP_BOOT_MODE_SHIFT);
switch (boot_mode) {
case BOOT_FLASH_SD_1:
case BOOT_FLASH_EMMC_1:
return BOOT_DEVICE_MMC1;
case BOOT_FLASH_SD_2:
case BOOT_FLASH_EMMC_2:
return BOOT_DEVICE_MMC2;
}
return BOOT_DEVICE_MMC1;
}
u32 spl_boot_mode(const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
int spl_boot_partition(const u32 boot_device)
{
switch (boot_device) {
case BOOT_DEVICE_MMC1:
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION;
case BOOT_DEVICE_MMC2:
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2;
default:
return -EINVAL;
}
}
void board_init_f(ulong dummy)
{
struct udevice *dev;
int ret;
arch_cpu_init();
ret = spl_early_init();
if (ret) {
debug("spl_early_init() failed: %d\n", ret);
hang();
}
ret = uclass_get_device(UCLASS_CLK, 0, &dev);
if (ret) {
debug("Clock init failed: %d\n", ret);
return;
}
ret = uclass_get_device(UCLASS_RESET, 0, &dev);
if (ret) {
debug("Reset init failed: %d\n", ret);
return;
}
ret = uclass_get_device(UCLASS_PINCTRL, 0, &dev);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
return;
}
/* enable console uart printing */
preloader_console_init();
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret) {
debug("DRAM init failed: %d\n", ret);
return;
}
}