mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
0df8afdf10
This patch enables dynamically powering down the IO receiver when not performing a read on DDR3 board. This optimizes both active and standby power consumption. This is derived from a patch that is done on AM335x[1] [1] http://arago-project.org/git/projects/?p=u-boot-am33x.git;a=commit;h=6a9ee4bc72ece53fabf01825605fba3d71d5feb2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
404 lines
10 KiB
C
404 lines
10 KiB
C
/*
|
|
* board.c
|
|
*
|
|
* Board functions for TI AM43XX based boards
|
|
*
|
|
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/errno.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/emif.h>
|
|
#include "board.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Read header information from EEPROM into global structure.
|
|
*/
|
|
static int read_eeprom(struct am43xx_board_id *header)
|
|
{
|
|
/* Check if baseboard eeprom is available */
|
|
if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
|
|
printf("Could not probe the EEPROM at 0x%x\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* read the eeprom using i2c */
|
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header,
|
|
sizeof(struct am43xx_board_id))) {
|
|
printf("Could not read the EEPROM\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (header->magic != 0xEE3355AA) {
|
|
/*
|
|
* read the eeprom using i2c again,
|
|
* but use only a 1 byte address
|
|
*/
|
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
|
|
sizeof(struct am43xx_board_id))) {
|
|
printf("Could not read the EEPROM at 0x%x\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR);
|
|
return -EIO;
|
|
}
|
|
|
|
if (header->magic != 0xEE3355AA) {
|
|
printf("Incorrect magic number (0x%x) in EEPROM\n",
|
|
header->magic);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
strncpy(am43xx_board_name, (char *)header->name, sizeof(header->name));
|
|
am43xx_board_name[sizeof(header->name)] = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
|
|
#define NUM_OPPS 6
|
|
|
|
const struct dpll_params dpll_mpu[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
|
|
{ /* 19.2 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 50 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 100 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 120 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP TB */
|
|
{-1, -1, -1, -1, -1, -1, -1} /* OPP NT */
|
|
},
|
|
{ /* 24 MHz */
|
|
{300, 23, 1, -1, -1, -1, -1}, /* OPP 50 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
|
|
{600, 23, 1, -1, -1, -1, -1}, /* OPP 100 */
|
|
{720, 23, 1, -1, -1, -1, -1}, /* OPP 120 */
|
|
{800, 23, 1, -1, -1, -1, -1}, /* OPP TB */
|
|
{1000, 23, 1, -1, -1, -1, -1} /* OPP NT */
|
|
},
|
|
{ /* 25 MHz */
|
|
{300, 24, 1, -1, -1, -1, -1}, /* OPP 50 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
|
|
{600, 24, 1, -1, -1, -1, -1}, /* OPP 100 */
|
|
{720, 24, 1, -1, -1, -1, -1}, /* OPP 120 */
|
|
{800, 24, 1, -1, -1, -1, -1}, /* OPP TB */
|
|
{1000, 24, 1, -1, -1, -1, -1} /* OPP NT */
|
|
},
|
|
{ /* 26 MHz */
|
|
{300, 25, 1, -1, -1, -1, -1}, /* OPP 50 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
|
|
{600, 25, 1, -1, -1, -1, -1}, /* OPP 100 */
|
|
{720, 25, 1, -1, -1, -1, -1}, /* OPP 120 */
|
|
{800, 25, 1, -1, -1, -1, -1}, /* OPP TB */
|
|
{1000, 25, 1, -1, -1, -1, -1} /* OPP NT */
|
|
},
|
|
};
|
|
|
|
const struct dpll_params dpll_core[NUM_CRYSTAL_FREQ] = {
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{1000, 23, -1, -1, 10, 8, 4}, /* 24 MHz */
|
|
{1000, 24, -1, -1, 10, 8, 4}, /* 25 MHz */
|
|
{1000, 25, -1, -1, 10, 8, 4} /* 26 MHz */
|
|
};
|
|
|
|
const struct dpll_params dpll_per[NUM_CRYSTAL_FREQ] = {
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{960, 23, 5, -1, -1, -1, -1}, /* 24 MHz */
|
|
{960, 24, 5, -1, -1, -1, -1}, /* 25 MHz */
|
|
{960, 25, 5, -1, -1, -1, -1} /* 26 MHz */
|
|
};
|
|
|
|
const struct dpll_params epos_evm_dpll_ddr = {
|
|
266, 24, 1, -1, 1, -1, -1};
|
|
|
|
const struct dpll_params gp_evm_dpll_ddr = {
|
|
400, 23, 1, -1, 1, -1, -1};
|
|
|
|
const struct ctrl_ioregs ioregs_lpddr2 = {
|
|
.cm0ioctl = LPDDR2_ADDRCTRL_IOCTRL_VALUE,
|
|
.cm1ioctl = LPDDR2_ADDRCTRL_WD0_IOCTRL_VALUE,
|
|
.cm2ioctl = LPDDR2_ADDRCTRL_WD1_IOCTRL_VALUE,
|
|
.dt0ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
|
|
.dt1ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
|
|
.dt2ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
|
|
.dt3ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
|
|
.emif_sdram_config_ext = 0x1,
|
|
};
|
|
|
|
const struct emif_regs emif_regs_lpddr2 = {
|
|
.sdram_config = 0x808012BA,
|
|
.ref_ctrl = 0x0000040D,
|
|
.sdram_tim1 = 0xEA86B411,
|
|
.sdram_tim2 = 0x103A094A,
|
|
.sdram_tim3 = 0x0F6BA37F,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x50074BE4,
|
|
.temp_alert_config = 0x0,
|
|
.emif_rd_wr_lvl_rmp_win = 0x0,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x0,
|
|
.emif_rd_wr_lvl_ctl = 0x0,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E084006,
|
|
.emif_rd_wr_exec_thresh = 0x00000405,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x04010040,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00500050,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00500050,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x00500050,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x00500050
|
|
};
|
|
|
|
const u32 ext_phy_ctrl_const_base_lpddr2[] = {
|
|
0x00500050,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x40001000,
|
|
0x08102040
|
|
};
|
|
|
|
const struct ctrl_ioregs ioregs_ddr3 = {
|
|
.cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE,
|
|
.cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE,
|
|
.cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE,
|
|
.dt0ioctl = DDR3_DATA0_IOCTRL_VALUE,
|
|
.dt1ioctl = DDR3_DATA0_IOCTRL_VALUE,
|
|
.dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE,
|
|
.dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE,
|
|
.emif_sdram_config_ext = 0x0143,
|
|
};
|
|
|
|
const struct emif_regs ddr3_emif_regs_400Mhz = {
|
|
.sdram_config = 0x638413B2,
|
|
.ref_ctrl = 0x00000C30,
|
|
.sdram_tim1 = 0xEAAAD4DB,
|
|
.sdram_tim2 = 0x266B7FDA,
|
|
.sdram_tim3 = 0x107F8678,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x50074BE4,
|
|
.temp_alert_config = 0x0,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E084008,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x08020080,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00400040,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00400040,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x00400040,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x00400040,
|
|
.emif_rd_wr_lvl_rmp_win = 0x0,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x0,
|
|
.emif_rd_wr_lvl_ctl = 0x0,
|
|
.emif_rd_wr_exec_thresh = 0x00000405
|
|
};
|
|
|
|
const u32 ext_phy_ctrl_const_base_ddr3[] = {
|
|
0x00400040,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00340034,
|
|
0x00340034,
|
|
0x00340034,
|
|
0x00340034,
|
|
0x00340034,
|
|
0x0,
|
|
0x0,
|
|
0x40000000,
|
|
0x08102040
|
|
};
|
|
|
|
void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
|
|
{
|
|
if (board_is_eposevm()) {
|
|
*regs = ext_phy_ctrl_const_base_lpddr2;
|
|
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
|
|
} else if (board_is_gpevm()) {
|
|
*regs = ext_phy_ctrl_const_base_ddr3;
|
|
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
struct am43xx_board_id header;
|
|
|
|
enable_i2c0_pin_mux();
|
|
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
|
if (read_eeprom(&header) < 0)
|
|
puts("Could not get board ID.\n");
|
|
|
|
if (board_is_eposevm())
|
|
return &epos_evm_dpll_ddr;
|
|
else if (board_is_gpevm())
|
|
return &gp_evm_dpll_ddr;
|
|
|
|
puts(" Board not supported\n");
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* get_sys_clk_index : returns the index of the sys_clk read from
|
|
* ctrl status register. This value is either
|
|
* read from efuse or sysboot pins.
|
|
*/
|
|
static u32 get_sys_clk_index(void)
|
|
{
|
|
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
|
|
u32 ind = readl(&ctrl->statusreg), src;
|
|
|
|
src = (ind & CTRL_CRYSTAL_FREQ_SRC_MASK) >> CTRL_CRYSTAL_FREQ_SRC_SHIFT;
|
|
if (src == CTRL_CRYSTAL_FREQ_SRC_EFUSE) /* Value read from EFUSE */
|
|
return ((ind & CTRL_CRYSTAL_FREQ_SELECTION_MASK) >>
|
|
CTRL_CRYSTAL_FREQ_SELECTION_SHIFT);
|
|
else /* Value read from SYS BOOT pins */
|
|
return ((ind & CTRL_SYSBOOT_15_14_MASK) >>
|
|
CTRL_SYSBOOT_15_14_SHIFT);
|
|
}
|
|
|
|
/*
|
|
* get_opp_offset:
|
|
* Returns the index for safest OPP of the device to boot.
|
|
* max_off: Index of the MAX OPP in DEV ATTRIBUTE register.
|
|
* min_off: Index of the MIN OPP in DEV ATTRIBUTE register.
|
|
* This data is read from dev_attribute register which is e-fused.
|
|
* A'1' in bit indicates OPP disabled and not available, a '0' indicates
|
|
* OPP available. Lowest OPP starts with min_off. So returning the
|
|
* bit with rightmost '0'.
|
|
*/
|
|
static int get_opp_offset(int max_off, int min_off)
|
|
{
|
|
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
|
|
int opp = readl(&ctrl->dev_attr), offset, i;
|
|
|
|
for (i = max_off; i >= min_off; i--) {
|
|
offset = opp & (1 << i);
|
|
if (!offset)
|
|
return i;
|
|
}
|
|
|
|
return min_off;
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_mpu_params(void)
|
|
{
|
|
int opp = get_opp_offset(DEV_ATTR_MAX_OFFSET, DEV_ATTR_MIN_OFFSET);
|
|
u32 ind = get_sys_clk_index();
|
|
|
|
return &dpll_mpu[ind][opp];
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_core_params(void)
|
|
{
|
|
int ind = get_sys_clk_index();
|
|
|
|
return &dpll_core[ind];
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_per_params(void)
|
|
{
|
|
int ind = get_sys_clk_index();
|
|
|
|
return &dpll_per[ind];
|
|
}
|
|
|
|
void set_uart_mux_conf(void)
|
|
{
|
|
enable_uart0_pin_mux();
|
|
}
|
|
|
|
void set_mux_conf_regs(void)
|
|
{
|
|
enable_board_pin_mux();
|
|
}
|
|
|
|
static void enable_vtt_regulator(void)
|
|
{
|
|
u32 temp;
|
|
|
|
/* enable module */
|
|
writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO0_BASE + OMAP_GPIO_CTRL);
|
|
|
|
/* enable output for GPIO0_22 */
|
|
writel(GPIO_SETDATAOUT(GPIO_22),
|
|
AM33XX_GPIO0_BASE + OMAP_GPIO_SETDATAOUT);
|
|
temp = readl(AM33XX_GPIO0_BASE + OMAP_GPIO_OE);
|
|
temp = temp & ~(GPIO_OE_ENABLE(GPIO_22));
|
|
writel(temp, AM33XX_GPIO0_BASE + OMAP_GPIO_OE);
|
|
}
|
|
|
|
void sdram_init(void)
|
|
{
|
|
/*
|
|
* EPOS EVM has 1GB LPDDR2 connected to EMIF.
|
|
* GP EMV has 1GB DDR3 connected to EMIF
|
|
* along with VTT regulator.
|
|
*/
|
|
if (board_is_eposevm()) {
|
|
config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0);
|
|
} else if (board_is_gpevm()) {
|
|
enable_vtt_regulator();
|
|
config_ddr(0, &ioregs_ddr3, NULL, NULL,
|
|
&ddr3_emif_regs_400Mhz, 0);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
char safe_string[HDR_NAME_LEN + 1];
|
|
struct am43xx_board_id header;
|
|
|
|
if (read_eeprom(&header) < 0)
|
|
puts("Could not get board ID.\n");
|
|
|
|
/* Now set variables based on the header. */
|
|
strncpy(safe_string, (char *)header.name, sizeof(header.name));
|
|
safe_string[sizeof(header.name)] = 0;
|
|
setenv("board_name", safe_string);
|
|
|
|
strncpy(safe_string, (char *)header.version, sizeof(header.version));
|
|
safe_string[sizeof(header.version)] = 0;
|
|
setenv("board_rev", safe_string);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|