u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi
Yuan Yao c3aa1df28d armv8: fsl-layerscape: Add README for deploying QSPI image
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
[YS: Reviese commit subject]
Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-21 09:20:32 -08:00

42 lines
1.4 KiB
Text

QSPI Boot source support Overview
-------------------
1. LS1043A
LS1043AQDS
2. LS2080A
LS2080AQDS
3. LS1012A
LS1012AQDS
LS1012ARDB
4. LS1046A
LS1046AQDS
LS1046ARDB
Booting from QSPI
-------------------
Booting from QSPI requires two images, RCW and u-boot-dtb.bin.
The difference between QSPI boot RCW image and NOR boot image is the PBI
command sequence for setting the boot location pointer. It's should point
to the address for u-boot in QSPI flash.
RCW image should be written to the beginning of QSPI flash device.
Example of using u-boot command
=> sf probe 0:0
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
=> sf erase 0 +<size of rcw image>
SF: 65536 bytes @ 0x0 Erased: OK
=> sf write <rcw image in memory> 0 <size of rcw image>
SF: 164 bytes @ 0x0 Written: OK
To get the QSPI image, build u-boot with QSPI config, for example,
<board_name>_qspi_defconfig. The image needed is u-boot-dtb.bin.
The u-boot image should be written to 0x10000(but 0x1000 for LS1043A, LS2080A).
=> sf probe 0:0
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
=> sf erase 10000 +<size of u-boot image>
SF: 589824 bytes @ 0x10000 Erased: OK
=> sf write <u-boot image in memory> 10000 <size of u-boot image>
SF: 580966 bytes @ 0x10000 Written: OK
With these two images in QSPI flash device, the board can boot from QSPI.